![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Reservoir Tank Sox](https://img.webike-cdn.net/catalogue/images/116406/0901-771-01010_1_TS.jpg)
Many color variations available
A wide variety of color variations are available, making it easy to match the color of the car body.
The price was inexpensive and helpful.
The texture is perfect.
View detail
![Fluid Cap (Clutch)](https://img.webike-cdn.net/catalogue/images/66209/99.8637.66_R_TS.jpg)
Rear also Dress-up
[How is it used?
for Clutch installed on a 21 Panigale V4 RearBrake tank.
It is just the right Size.
Was the one you received as per Image?
It was exactly as I imaged it in the posted photo.
Was the installation difficult?
It is easy to cover Tank.
The position of the side cowl needed to be adjusted so that it would not interfere with the side cowl because it was not in its original mounting location.
How was your experience with it?
For Front, I am using DUCATIOEM,
The quality is comparable, so brembo is more cosmetic.
[Included Parts:were they on?
None
View detail
![Reserver tankSocks](https://img.webike-cdn.net/catalogue/images/116406/0901-771-01090_1_TS.jpg)
Exactly
SPGrade in Motorcycle MODEL owned by Reserver tank [Color] I thought it looked good in Smoke. I thought about replacing it with standard White since mine is a Standard Grade, but once I did this Cover, I thought I would never know. I thought about replacing it with a standard white one, but I decided that I wouldn't know if I did!
I was worried about the color of the base, whether I should choose Black or Blue with YAMAHA color embroidery, but the color of the base is Color.:Gray, I bought it because it was inexpensive and I thought I could change it if it was a failure. It's a very rudimentary customization, but I'm sure I'll grow to love it.
View detail
![Fluid Cap (Clutch)](https://img.webike-cdn.net/catalogue/images/66209/99.8637.66_R_TS.jpg)
Simple and Parenthesis good!
Installed on Front Brake fluidTank.
I bought the OEM with brembo Brake Caliper.
I don't think Fluid liquid will splash around in Touring, so it is not the original purpose, but I like it a lot as a dress-up.
The price is reasonable, so I think it is a very cost-effective product.
The size of the band is considerably thinner than the wrist band, so I think it holds well and there is no worry about it falling off.
View detail
![Fluid Cap (Clutch)](https://img.webike-cdn.net/catalogue/images/66209/99.8637.66_R_TS.jpg)
Brembo 15ml tank cover for Brembo reservoir
This was teh other tank cover that I purchased for the rear reservoir. I wanted to keep the Brembo vibe going and as I already had a Brembo reservoir tank on the rear also I went for the Brembo tank cover. This is also made with a very high cotton content and this means is wicks the moisture away and stops it from getting into your reservoir. No one wants contaminated brake fluid. This is very bad for your brakes. The right rtank cover was found on Webike but as I was already going to buy the 45ml one anyway, i couldn't really get it wrong with this 15ml one. This one as you can guess is slightly smaller and has only one logo on it whereas the biggere 45ml version has front and back. My order was shipped using Fedex as I do trust their efficiency and know my order will arrive safely. I am very pleased with how this tank cover works, it looks out of this world and very pleased indeed. View detail
![Fluid Cap (Clutch)](https://img.webike-cdn.net/catalogue/images/66209/99.8637.66_R_TS.jpg)
Stretch out quickly
It was fine when I put it on, but soon it stretched and became loose...
If you use it as it is, wind pressure will make it fly away somewhere.
View detail
![Master Cylinder Cup Band](https://img.webike-cdn.net/catalogue/images/92770/076-1_TS.jpg)
buying a replacement
I purchased this to replace a previously purchased and used item that was faded, discolored, and frayed with frayed threads, and was getting old, so I purchased this to replace it with a new one.
I like the Simple Design and HRC's Logo, but it is expensive for the Small size.
I wish it was cheaper.
View detail
![Fluid Cap (Clutch)](https://img.webike-cdn.net/catalogue/images/66209/99.8637.66_R_TS.jpg)
Is good
I use it on Brake&Clutch tanks as a measure for Fluid leakage protection&Custom purposes.
As they deteriorate slightly over time, we are also stocking spare storage, etc.
View detail
![Fluid Cap (Clutch)](https://img.webike-cdn.net/catalogue/images/66209/99.8637.66_R_TS.jpg)
Genuine Brembo 15ml Tank Resevoir Sock Cover
Genuine Brembo 15ml Tank Resevoir Sock Cover I bought this to add to my rear reservoir on my bike as I wanted to match the front reservoir sock. It also has a dual purpose, to stop any condensation forming and to therefore protect the fluid inside etc I found the sock by simply searching Webike store. Was pretty easy to find if I'm honest as I already had purchased the larger one. Along with some other parts and accessoried, my order was shipped by EMS and arrived in 5 days. All my parts etc arrived without a problem and 100% perfect. The sock itself came in a littel plastic sleeve. The material seems to be a terry cotton mix but I am not too sure of that. It has a lot of stretch so might at a push fit a larger reservoir but certainly not fit for the 45ml one. The Brembo logo was stitched really neatly and no extra bits of cotton were found. I have had a few of these that are not genuine and you can really tell the difference, these are just perfect. Not really much else I can say about this, it does look awesome though. Thank you Webike. View detail
![Reserver tankSocks](https://img.webike-cdn.net/catalogue/images/116406/0901-771-01020_1_TS.jpg)
The coloring is nice.
Daily commute to work (except when it rains during the workday) Since I have been riding, MORIWAKI's band faded in less than half a year, so I searched webike and found this site.
Branded products since it is a part of the body that is seen every day (TSR and brembo) I thought about using the "K" series, but I decided to go with the "K" series because it is a consumable product that is exposed to rain, wind, & sun.
I was concerned because the KIJIMA products I had worn before were inexpensive but looked a little bad in terms of sewing and appearance, but when I finally received them, I was impressed by their solid construction.
For a while, I used to use Bear's Wrist Band instead, but after a month, the fluff became noticeable and looked bad, but I did not see any such problem with this product after more than a month.
In any case, the MASTERBand is a consumable item, and since it is not expensive, replacement in 3-4 months should be sufficient.
View detail
![Fluid Cap (Clutch)](https://img.webike-cdn.net/catalogue/images/66209/99.8637.66_R_TS.jpg)
Used as reserve tank for Clutch and Rear brake
It is simpler than Ducati's wrist band and has a cool logo, so I bought it 90% for dress-up purposes.
The base of the Tank is quite stretchy but fits nicely.
As it is an OEM Product, the size is Exactly.
The tank of the rear brake is attached to the plastic parts, but it was possible to cover the entire tank neatly.
The durability of the stretched part needs to be verified in the future, but I am satisfied with the high quality of the new product.
View detail
![Master Cylinder Cup Band](https://img.webike-cdn.net/catalogue/images/92770/076-1_TS.jpg)
Parenthesis OK
I bought this for my CBR600RR.
I don't do Circuit runs.
I bought this for its looks.
View detail
![Master Cylinder Cup Band](https://global.webike-cdn.net/photo/impression/8a/8afce930f9e8fd0180299a750a1da3afL.jpg)
FACTORYMachineReplica!
Purchased to create a FACTORYMachineReplica.
It is expensive, but the authenticity is perfect.
View detail
![Fluid Cap (Clutch)](https://img.webike-cdn.net/catalogue/images/66209/99.8637.66_R_TS.jpg)
Yule! No durability
Depending on the position of the tank and bracket, it may come off easily. I installed it on my Panigale, but the clearance with the Cowl is limited, so it is easy to come off even more. I used a thin Tie Wrap under the Tank cap, although it looks bad. The rubber deteriorated quickly and became loose in half a year. I think it can't be helped because I use it under severe conditions outdoors, including under the blazing sun in mid-summer, but I want more durability and a tight fit. View detail
![Fluid Cap (Clutch)](https://global.webike-cdn.net/photo/impression/3a/3a6002198448183ebca722d1ea7c10a8L.jpg)
Reserve tank cover
I installed this to prevent leaks and moisture from the Reserve tank and I think the quality is good because it is a brembo OEM Product. I used to use a cheaper product from No Brand, but it went bad and I had to replace it.
Let's face it, it's pricey for a product like this! I expect the quality to be good in return.
View detail
![Master Cylinder Cup Band](https://global.webike-cdn.net/photo/impression/1a/1af348678b93131d8109133cba8fe673L.jpg)
protection
I bought and installed it for looks and protection and to keep Wound from getting into Screen.
It looks good, but it's expensive.
View detail
![Fluid Cap (Clutch)](https://img.webike-cdn.net/catalogue/images/66209/99.8637.66_R_TS.jpg)
Soon it was loose.
The base of the tank is quite large compared to the large size of the Clutch reservoir tank, so it wraps around the entire tank body without Exactly fitting. Because of this, the product is stretched out and it gaps while driving. I think this phenomenon is not limited to this product, but I thought it would be better to support it with Rubber Band to prevent loss. View detail
![Fluid Cap (Clutch)](https://global.webike-cdn.net/photo/impression/56/5636e3b468ad28027cb882241d9a607dL.jpg)
Parenthesis by bremboMark is good!
It will protect the painted surface in the unlikely event of a Fluid leak!
I love it because it looks so Parenthesis good!
View detail
![Fluid Cap (Clutch)](https://global.webike-cdn.net/photo/impression/4a/4a4daa131724f6b90fff17d570d97440L.jpg)
Manzoku.
It's a genuine brembo product and fits well in the brembo Cup. View detail