Reviews
Fits: KAWASAKI Ninja250, KAWASAKI Z250, KAWASAKI Ninja250R
Brembo crab caliperSupport
I was able to install it on my ninja250R without any problems. View detail
Fits: YAMAHA WR250R
It was a fake Brand product.
I bought it because it was a Hahn Wheel product, but it was a disguised Manufacturer product.
I had it returned and returned Gold, but I have my doubts about WeBig's response.
? First, I pointed out that Screws were cut in all four holes of the Caliper support, making it impossible to install.
→New items arrive.
? He pointed out that the new product was just a Drill rubbing the wrong Screw cut area and no Anodized Treatment.
→This product is racing parts. They are not defective as long as they are functional."
? About the scratches on what should be a new product.
Within the scope of →Product Spec.
? We contacted Hahn Wheel directly and found out that it was a counterfeit branded product.
→To be honest, the packing style of products varies from manufacturer to manufacturer, and there are many products that do not have a brand logo, etc., or that are similar to the packing style of this product, so we have not checked the products as you have described.
Customers who have already purchased the product will be notified and will be able to return the product for a refund.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
SP TAKEGAWA Rear Caliper Bracket Kit for Honda Monkey 125
About quality and texture - Top quality. Beatuifully machined bracket here from Takegawa, light weight but super strong. About the feeling of use - Caliper mounted up with no issues and the operation of the caliper is perfect due to the well designed and produced bracket. Products to buy together - Takegawa list these parts to completed the rear caliper upgrade, Brembo 2P caliper 20.6951 and brake hose 500mm. Difficulty of installation - I found the install of just the bracket easy as the rear wheel only needs to be removed for access but for the entire upgrade to be completed difficultly level steps up to medium. Cost performance and comparison with other products - I find the rear caliper bracket a little over priced compared to the front bracket but this seems to be common with all brands. About shipping and packaging - I think Webike are doing their best with shipping pricing, so I'm happy. Packages ship within 24 hours and arrive very quickly from Japan. Any concerns, cautions, or advice when purchasing - If you are looking to upgrade the rear caliper due to a lack in stopping power then adds this to your cart along with all the other parts required. View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125
OVER RACING Front Caliper Support for Brembo on Honda Monkey 125
About quality and texture - Top quality. Beatuifully machined adapting bracket and I love that it is availble in black to blend in with the OEM lower fork leg. About the feeling of use - Perfect fit at both ends and the upgraded caliper have no issues operating. Products to buy together - You will be needing the Brembo caliper to complete the install and wanting a braided brake line to make the install perfect. Difficulty of installation - I found the install of the bracket easy, straight forward replacement of the OEM brake caliper. Cost performance and comparison with other products - There are a number of brands with this product here on Webike and all priced vary similar, I went with Over Racing for the win. About shipping and packaging - I think Webike are doing their best with shipping pricing, so I'm happy. Packages ship within 24 hours and arrive very quickly from Japan. Any concerns, cautions, or advice when purchasing - Some of these products available specify they are not compatible with the ABS Monkey, so be sure to select the correct one for your setup. View detail
of high quality
Installed on a GSX-R1000R 2019
Non-conforming installation.
This product is a ~2016 GSX-R1000 (non-ABS) CaliperMount for.
〜After comparing the Parts List of the ~2016 R1000 with the current R1000R, I found that the only difference between the ~2016 non-ABS vehicle and the current vehicle is probably the presence or absence of the rear wheel speed sensor mounting area, so I purchased it with the assumption that it would be modified.
The result is probably a bingo, except for the SpeedSensor, which can be physically attached to the CaliperMount because it can be replaced.
All that remains is to somehow install a speed sensor and a rear caliper, and we are done.
However, the vehicle speed sensor requires fine tuning because it does not function unless the clearance with the slit is adjusted, and when OEM wheels are used, the clearance between the Caliper and the wheel is tight due to the shape of the wheel, so it is necessary to be prepared to shave off any interference points.
In any case, this is a rather risky process, as it requires Brake components to be machined from the commercial state.
I dare not write the details here because I feel it is not good for people to be carelessly imitated, but if you TRY, be prepared.
The aluminum cut-outs are of high quality, and the black anodized aluminum is very nice because the machining marks are not as glamorous as those of silver.
It can be recommended without question for use within conformity.
The diversion to the current R1000 is …
It is definitely one of the few options available, but I think it is tough without a significant amount of knowledge and sukill.
View detail
I'd rather not use it, but...
Very old brembo caliper from the 80's? I have a Ducati on hand that uses Caliper support from
I bought this for adjustment as the Caliper center is out of alignment no matter how you look at it.
Although there is a limit to how much I can adjust the Clearance, I was able to position Caliper more reliably in the Center relative to the disc than before I put it in.
Naturally, the condition of the seal and piston on the caliper side is also important, so we will continue to be diligent.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1300
EXELLENT !!! for XJR 1300
Part received is of top quality. Perfect match for Brembo GP4-RS 108mm as requested in previous communication with Webike and manufacturer. Final finsh of the product is amazing and I am realy satisfied with all. Thank you View detail
Fits: HONDA APE 100 TypeD, HONDA MONKEY, HONDA NSF100, HONDA NSR80, HONDA XR100MOTARD, HONDA NSR50
brembo
They are installed together for brembo installation.
Is it because the processing is different from others? The price seems a little high.
If you don't care about Design, anything that fits the Pitch seems to be fine.
View detail
WR3 Bracket for ZX14R
I have been wanting to do a Brembo rear caliper conversion on my 2021 ZX14R for sometime now, problem was I couldn't find a company that made the conversion bracket for the caliper, I came across the WR3 bracket on Webike Japan and ordered it, it arrived in a few days to Australia, the workmanship and quality of the product is beautiful and the fit was straight forward with no problems at all, I highly recommend this product from Webike Japan. Steve Australia View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI ZX-14R High Grade
Brake upgrade for ZX14R
Been wanting to do a rear Brembo brake upgrade on my ZX14R and couldn't find anyone that made a rear support bracket to suit until I found the Active one on Webike Japan, perfect fit and well priced, arrived quick, highly recommended. View detail
brembo
It is installed for Brembo caliper installation.
There seem to be no problems with appearance, strength, etc.
View detail
Fits: SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX750 KATANA, SUZUKI GSX1000S KATANA (KATANA)
SUNSTAR 310mm, used on Brembo caliper
It's a very accurate product, with no major adjustments and a Center. The fact that it doesn't look flashy is a good thing. View detail
Fits: HONDA CBR600RR
Defective product. It was a design error. I can't believe you put this product out into the world.
Defective product. It was a design error. I can't believe you put this product out into the world.
First of all, the height of the screw receptacle for the ABS speed sensor does not match the OEM. I had to prepare a 5mm collar by myself to install it.
Also, when I tighten up the shaft to the specified torque, I can hear the set screw of the blanket and the speed sensor pulsar rubbing against each other. The OEM blanket has a 1mm protrusion on the wheel side, but this product has a flat wheel side, so I think the height is not enough.
View detail
99~07 HAYABUSA CALIPERS BREMBO CHANGE SUPORT (AGRAS)
neat mounting High Quality Best choice for upgrading Hayabusa brake performance Applicable only to 100MM European Brembo calipers View detail
D Tracker (Carburetor Vehicles) attached to
[How is it used?
D Tracker (Carburetor Vehicles) Used in.
Applications:Motard race, Off-road, Touring
Used to install the successor model, D-TRACKER-X Front Brake Disc Rotor. Used for about 8 years.
Was the one you received as per Image?
Just like the image, it was a beautiful anodized black.
Was the installation difficult?
To install the Caliper, simply remove the Caliper mounting bolt, attach this product to the Caliper mounting area, and then attach the Caliper to this product.
If you are working on your own, you should also prepare a service manual and a torque wrench if possible.
The more weapons you have, the better, since you will be customizing critical components.
How was your experience with it?
I used it for about 8 years and it never anodized, never faded, never broke due to fatigue, and never had any problems with hard braking in motard races.
However, there is one point that I am concerned about, and I guess it was a little difficult to design this product. The pad and brake disc rotor are not aligned properly, and the outside of the pad does not come in contact with the disc, and there are parts that remain unshaved.
I was aware that they were called RaceParts, and I would periodically remove the calipers to visually check them, and if there were any bumps, I would grind them with a file or disk grinder to smooth them out.
Those who introduce this product should pay attention to the above items and use it.
In order to improve the performance of Brake even a little bit, I decided that I had no choice but to do the work. (Never perceived as defective.)
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
[ITEMS TO BUY TOGETHER
・D-TRACKER-XOEMFront Brake Disc Rotor
・Disc RotorMounting Bolt
・Brake Pads
・Brake hose (Read the Manufacturer description carefully.)
・Brake fluid (DOT4)
・Service manual
・Torque wrench
View detail
SECTION
For those with ABS, Bracket's Seisa k is required.
There is also a part number for Bracket with Bracket, but it's not sold...
View detail
Thank God it exists.
Installed on Initial ModelGSX1300R HAYABUSA
Caliper support for replacing the rear brake with the new Crab type Brembo or Gail's axial mount.
Since the OEM Caliper was getting tired, I decided to replace it with a new brembo Crab.
The texture is good because it is an aluminum cut-out.
The price of the Neck is close to that of a cast new Crab, but considering that they are still supplying custom parts for this year's motorcycle, the price is understandable.
Axial 84mm Pitch.
Compatible Calipers can be found in the Instruction Manual, which can be downloaded from the manufacturer's website.
The Initial Model GSX1300R HAYABUSA has the Caliper mounted on the lower side and the OEM Caliper has the brake hose installed in the middle of the layout, so at first glance it looks like the OEM brake hose can be installed as is.
However, in reality, if the new brembo Crab is installed with this product and the OEM brake hose is connected, the brake hose will interfere with the torque rod and cannot be installed.
Therefore, the OEMBrake master&brembo new Crab (casting) If you are installing a combination of
・Brake hose:750mm
・Banjo:20° (Both Caliper side and MASTER side)
You will need to be prepared to
It's a bit pricey, but for an aluminum cut-out of this size, the quality and rigidity is perfect.
If you are riding an Initial Model GSX1300R HAYABUSA and your rear brake is worn out, we recommend this product.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Light weight and well built
Because of the speed sensor, I was using Caliper support made by Takekawa, but I replaced it with a new SpeedController made by the same Takekawa, and the speed sensor bracket became unnecessary. I replaced it with a new one.
It's as if Over has managed to make it as light as possible, yet strong enough to hold up to the rigging.
The core of the disc is Exactly and the accuracy is perfect.
I chose black to match the color of the Front and Caliper, but I guess that's just my preference. I think I like it.
The price is well worth it, and I recommend that you use a reliable product like Konno's, as a defective brake can be fatal.
View detail
Fits: YAMAHA XJR400S, YAMAHA XJR400, YAMAHA TZR250, YAMAHA T MAX, YAMAHA SRX600, YAMAHA RZ350RR, YAMAHA SRX400, YAMAHA RZ250RR, YAMAHA FZX750, YAMAHA RZ250R, YAMAHA FZX750, YAMAHA FZR400RR SP, YAMAHA FZ-6N, YAMAHA FZ6-S FAZER, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA R1-Z
RZ Caliper support
Front forkTZr on RZ250 (3ma) I purchased this product to equip a Brembo caliper to a vehicle of
The texture is good and fitting is no problem.
I think it looks good with the meat removed.
View detail
Difference from AGRAS
I bought this because I wanted to put the Brake Caliper on the rear under the Swing Arm and change to the brembo Crab. There are Lady Bird, AGRAS, and ACTIVE as options, but I had bought AGRAS until now. I had bought AGRAS until now because the shape and egris are very similar. It's probably OEM anyway. But I bought both (different car models) in a short period of time so I could compare them. As it turns out, they're completely different products, although AGRAS is less than 1mm from each other. "Very Slightly Large." That is It's hard. It is a fitting, and the stripe grooves are obvious that it was cut by NC lathe. On the other hand, this product is only black, and it is smooth without such cutting marks. The installation to the car body was also Exactly and easy (It doesn't mean that it is loose or made small and it is a governor). The color is Black and it doesn't stand out, but if you want to make your Caliper stand out, the price is good enough. "Half of AGRAS." It is attractive to Large. View detail