Reviews
Fits: SUZUKI Gixxer, SUZUKI Zixer(150)
Air filter installation is quite large
As an air filter, it is a very ordinary 3, but 5 is because it is affordable and very ordinary.
The replacement procedure for the pre-2020 model can be found by Googling, but the replacement procedure for the post-2020 Gixxer 150 cannot be found by Googling, so I will describe it here.
(1) Remove the in-hemp palm clamps from the harness and rubber sheet to facilitate work.
The top two are easy, and the Right Side is by turning over the Rubber sheet. The problem is the yellow color of the lower side.
?Insert and remove the Driver's shaft from the depression where it enters the Tail cover; the Screw will fall completely out and down. It is wise to pinch it with the Tweezers before it is about to come off. the ground without getting caught in the Cover or anything else when it falls out.
When the screws on the front side cannot be accessed by shifting the harness, the screws on the side cover can be removed by removing the screws, pulling them slightly toward the front, and making space for the driver to be inserted.
(5) Remove and replace the collapsed packing on the lid side and the box side as it looks like a drill, and place the air filter in the box.:Set feeling and not hooked, so I put it down.
(6) Attach the two screws with yellow color circle on the bottom of the lid side, and carefully insert the lid from the front to prevent the screws from falling off. If you have a super strong magnet driver, you may be able to put it on afterwards and insert it through the narrow gap, but it seems to be very difficult.
(7) Pattern and Quantity:Since it is not a mechanism that can be set, the screw holes must be aligned and the lid and box must be set so that the front and rear quantities are well aligned.:Pair (for Left and Right) While moving the screws to the upper side, check the position of the Screw holes and temporarily fix the upper Screw. Before and after thisQuantity:Pair (for Left and Right) You might have a pretty good hunch that shaking it up to
(8) Align the screws on the lower side with the screw holes, and insert the screwdriver through the slit as you did when you removed the screw.
Tighten the screws on the side cover and put back the inHemp palmock to finish the work.
If you do this work often, you may get used to it and be able to do it in about 20 minutes, but if you fall into a screw or some other strange place and get stuck, it is Large strange to take it out. I think it took me about an hour to do Small because I had to be very careful.
Once I do it once, I might be able to make it a little smoother next time, but it's hard to do anyway.
It is a good Element to remove it rather often, but you may not want to do this step unless you are in a desperate situation.
View detail
Fits: HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Great part
Genuine Honda part, and new. It has beautiful finish. Reliable. It met my need for a well-made replacement part. Fits, perfectly, in the my motorcycle. I recommend it. View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
Reliable OEM Product
[How is it used?
I bought a used CBR600RR PC40 and after riding it for over 2 years, I decided it was time to replace it, so I looked at the Parts List.
How was your experience with it?
The fit is perfect and secure.
Since it was the first replacement, we removed most of the cowls and tank covers and accessed the air cleaner box.
Remove the Screw of the Air Cleaner BOX, and then remove the Quantity of the Air cleaner element.:Remove the 2pc Screws. Be careful not to drop them into the Throttle body at that time.
All I had to do was replace it by following the same procedure. It was my first time working with Smooth, but I was able to replace it with Smooth using only information from Net.
However, after 2 years and 10,000 km, the air cleaner was not too dirty before replacement.
How did it compare to other products?
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R
Securely mounted.
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased from an acquaintance was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert the Grommet into the mounting hole of the Front Fender. The collar with the brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It feels good to properly combine and install these parts.
View detail
Fits: HONDA C125, HONDA C125, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R
Refresh
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert it into the mounting hole of the Front Fender. A collar with a brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Rubber-based parts deteriorate, so it's a good idea to replace them periodically. They also protect the parts, so it is better to replace them before they stop functioning.
View detail
Stable OEM Parts
[How is it used?
Air Filter was replaced together with SUZUKI/CHOINORI during CarburetorO/H.
The originally attached Filter was marginal because it fell apart when I touched it with my fingers.
How was your experience with it?
The OEM parts have been used without any problems.
The price is low, so if you haven't changed it, you should.
How did it compare to other products?
CHOINORI has a small number of Other Brand Products, but OEM Parts are not discontinued, which is helpful.
[Points to note]
This Filter is wet type, so it is necessary to moisten the Oiletc. during installation.
But be careful not to put too much on, as it will drip through the gaps in the FilterBox.
View detail
Fits: HONDA PCX150, HONDA WW150 AC
Genuine Honda Air FIlter for PCX150 2012
New air filter needed for this baby of a bike. I have had other air filters before and not been overly impressed. Decided to go for stock genuine Honda for a change. Finding the correct part was simple and I used the help pages Webike provide and cross referenced with Honda schematics to confirm. The price was really good for a genuine Honda and as I had other items in the order, the shipping was cushioned somewhat and very reasonable. Delivered by EMS standard within a week of placing the order. After removing most of the top body work, the air filter is relatively easy to install, it's putting everything back which is a pain. The filter itself looked really good and a proper piece of Honda kit. Very happy with this item. Thank you Webike View detail
Fits: HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
For CB250F
About quality and texture genuine productAbout quality and texture Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging View detail
Fits: HONDA XR250, HONDA XR250, HONDA XL600V, HONDA XL600V, HONDA XL600V, HONDA XL600V, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S, HONDA XL125S
CB250F MUFLER PROTECTED RUBBER
This is used to protect the bend in case of any shock Genuine product -Rubber, FrontFender Mau 61103-357-000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Fits: SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125L, SUZUKI DR-Z125L, SUZUKI DR-Z125L, SUZUKI DR-Z125L, SUZUKI DR-Z125L, SUZUKI DR-Z125L
Genuine Suzuki Air Filter for DR-Z125 2015
This was a part that needed changing on the DR-Z125 bike that came in for a service. The air filter was pretty bad and very dirty which was only having a negative effect on the bike's running. The correct air filter was easy to find using the tools and help section on Webike pages. I also cross referenced with Suzuki schematics for my own peace of mind. The air filter was really good value and slightly cheaper than I could source locally at my nearest Honda parts dealer. I chose EMS for my courier as they just get my orders delivered fast. 5 days from shipping my order arrived. Everything in the order was extra well packed with bubble wrap for security. The air filter is not a massive one especially for such a small bike but you do need it to fit as it should. The old one had gotten a little funny shaped asn was not sitting right. This one however, fits perfectly. The air filter came in the usual Honda packaging. Fitting is easy, the filter is not doing what it is supposed to do and the bike does sound better for it. Brillaint work Webike. Happy customer. View detail
Fits: HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90
Recommendation to Power up with a safety margin
I recently changed my carburetor to a PB16 and went from Powerful to a 90for OEM air cleaner.
At that time, I only had an OEM 50 air cleaner box on hand, and the size of the Element and the box did not match, so I replaced it with a 90 OEMAir cleaner box.
What is Air cleaner box?
But after all the bore ups and high camshafts and stuff, why go back to the air cleaner box?"
The reasons are as follows.
What does the air cleaner box do?
The air cleaner box prevents rainwater, dust, or dirt from entering the air cleaner.
The box enclosure also has the merit of reducing the noise generated by the air cleaner and stabilizing the air delivered to the carburetor.
[Merit]
◎Filters air and is designed to prevent moisture from entering the box even on rainy days, so clean and stable air can be sent to the Carburetor. 。 Depending on the geometry, the feeRing changes slightly when re-accelerating. (In extreme cases, some people make their own air cleaner boxes.)
[Demerit]
Custom vehicles suffer from a lack of power due to the fixed amount of air intake. For this reason, many custom vehicles are equipped with power filters and other products from other brands.
The effect of the air cleaner box.
Air Chamber effect.
It regulates air temperature and rectifies airflow." In short, it is an effect to send air within a certain range to the Engine without causing sudden changes in air pressure or temperature by temporarily storing air that has been taken in.
→ Thanks to this effect, you can ride in summer or winter, sunny or rainy, without carburetor setting.
Effect as an intake pipe
The ...box itself plays an important role as an intake pipe.
Long intake pipe = Air cleaner box
The RPM generated by the →LargeTorque will be lower. 。 Removing the intake pipe = Power Filter
→The RPM generated by the most LargeTorque is increased, and the low-speed Torque is weakened. ▲ The combustion state also changes as the Engine characteristics change, and at certain RPMs the combustion temperature is higher than NORMAL, shortening the Engine's life.
After installing the air cleaner box
Torque seemed to have been physically Torque seemed to have been physically Torque seemed to have been physically Torque seemed to have been physically Torque seemed to have been physically Torque up up 。
Idling, of course, has become quieter while driving and I can hear the Engine better.
I ran it on a rainy day to test it out, and the Engine was stable without any squeaking.
Carburetor setting was done with a box, and it ran with the same setting from summer to winter, but no setting change was necessary.
? No exuberant acceleration toward high rpm.
→Mild means.
Removing the air cleaner box, like the power filter, will increase the intake air volume, so the engine power itself will increase.
However, even if this Power goes up, it is not possible to ride on rainy days, or it is necessary to re-carburetor setting in summer and winter.
Almost maintenance-free in the box, same setting throughout the year, but power is there.
I think it depends on where you want to go.
I used to enjoy the peppy performance, and I also felt the benefit of having the Power Filter attached (lol), so I can sympathize with you on that!
But recently I've been wanting to ride more comfortably and anytime, so I've become a more stable BoxSpec.
For reference as an option.
View detail
Fits: SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300RAZ, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300R, SUZUKI GSX1300RAL9, SUZUKI Hayabusa GSX1300R
Genuine Suzuki Air Filter for GSX1300R Hayabusa
New air filter needed for this monster of a bike. I have had other air filters before and not been overly impressed. Decided to go for stock genuine Suzuki for a change. Finding the correct part was simple and I used the help pages Webike provide and cross referenced with Suzuki schematics to confirm. The price was really good for a genuine Suzuki and as I had other items in the order, the shipping was cushioned somewhat and very reasonable. Delivered by EMS standard within a week of placing the order. After removing most of the top body work, the air filter is relatively easy to install, it's putting everything back which is a pain. The filter itself looked really good and a proper piece of Suzuki kit. Very happy with this item. Thank you Webike View detail
Genuine Yamaha Air Filter for MT09 2017
New air filter needed for MT09 2017 model. I have had some other aftermarket air filters before and not been overly impressed. Decided to go for stock genuine Yamaha for a change. This part has already been superseded so should be pretty good. The price was really good for genuine Yamaha and as I had other items in the order, the shipping was cushioned somewhat and very reasonable, Delivered by EMS and arrived in 5 days of placing the order. After removing most of the top body work, the air filter is relatively easy to install, it's putting everything back which is a pain. The filter itself looked really good and a proper piece of Yamaha kit. Everything is nice and well manufactured as you would expect from a stock part. The fins are even and no signs of any disturbance. Overall, a really nice looking air filter. Very happy with this item. Thank you Webike View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90
CUB90OEMTube
Purchased with Bore up of CUB.
I wanted to use the OEM Air cleanerBox, but the CUB50OEM had a small intake diameter, so I changed to this one.
The length of the tube itself remains the same, but the diameter is considerably larger.
View detail
Beautiful part
Excellent new and genuine Honda part. 8x100 flanged screw in excellent condition. Robust part, with beautiful finish and intact. The product was very well packaged, in a cardboard box, as well as sealed and stored with bubble wrap and air. Delivery in satisfactory time. I highly recommend it. View detail
Fits: HONDA VT750C2F, HONDA VT750C2F, HONDA VT750C2F, HONDA VT750C2F, HONDA VT750C2F, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VT750, HONDA VF750CD
FOR CB250F
.Actually this item i could not found in my country (carburettor air breathing filter). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
Fits: HONDA CRF250R, HONDA CRF250R
New is soft.
[How is it used?
I was servicing a CRF250R that I was keeping from a friend to sell and when I removed the sub-frame, I could not put it on at all.
No matter how I tried, I couldn't reach the slobo and thought about just throwing it away, but the price of the Connecting Pipe was lower than I expected, so I replaced it and tried again.
Was the one you received as per Image?
We received a Connecting Pipe that is more resilient and softer than the one that came with the vehicle.
How was your experience with it?
It took some effort, but we were able to install it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you don't regularly apply Rubber's protectant and keep it moist with Silicon, the Rubber system will become rusty.
View detail
Fits: KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI VERSYS 1000, KAWASAKI VERSYS 1000 SE, KAWASAKI VERSYS 1000 SE, KAWASAKI VERSYS 1000 SE, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000 R EDITION, KAWASAKI Z1000 R EDITION, KAWASAKI Z1000 R EDITION, KAWASAKI Z1000 R EDITION, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000
Genuine Kawasaki Air FIlter Element for Z1000 2018
This bike, the Z1000 came in for a service which consisted of the oil change, air filter and spark plugs. New air filter needed for Z1000 model and decided the best option would just be the OEM standard one. I have had other after market air filters before and not been overly impressed. Decided to go for stock genuine Kawasaki to make sure we got this right first time. This part was not hard to find as it does fit a lot of other models from Kawasaki. The price was really good for genuine Kawasaki and as I had other items in the order, the shipping was cushioned somewhat and very reasonable. My chosen courier was EMS Express and was delivered within a week of placing the order. After removing most of the top body work, the air filter is relatively easy to install, it's putting everything back which is a pain. The filter itself looked really good and a proper piece of Kawasaki kit. Very happy with this item. Thank you Webike View detail
Fits: HONDA LEAD110(EX), HONDA LEAD110(EX)
Genuine Honda Air Filter for LEAD 110
This was another part that needed changing on the Lead 110 bike that came in for a service. The air filter was pretty bad and very dirty which was only having a negative effect on the bike's running. The correct air filter was easy to find using the tools and help section on Webike pages. I also cross referenced with Honda schematics for my own peace of mind. The air filter was really good value and slightly cheaper than I could source locally at my nearest Honda parts dealer. I chose EMS for my courier as they just get my orders delivered fast. 5 days from shipping my order arrived. Everything in the order was extra well packed with bubble wrap for security. The air filter is not a massive one especially for such a small bike but you do need it to fit as it should. The old one had gotten a little funny shaped asn was not sitting right. This one however, fits perfectly. The air filter came in the usual Honda packaging. Fitting is easy, the filter is not doing what it is supposed to do and the bike does sound better for it. Brillaint work Webike. Happy customer. View detail
Fits: SUZUKI GSX-R1000AM0, SUZUKI GSX-R1000RAM0, SUZUKI GSX-R1000RZAM0, SUZUKI GSX-R1000AL8, SUZUKI GSX-R1000L8, SUZUKI GSX-R1000RZL8, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R-Z
Genuine Suzuki Air Filter
A customer came in with this beauty that needed a bit of a service. The air filter needed changing out as it had been sat in a shed for a while. Strangely, the bike still ran which pretty good which was a shock. Anyway, with a few other parts for this project, all my order was shipped via EMS and arrived in great condition in 5 days. The stock Suzuki air filters are always going to be the first option if they are available and this was the case much to my surprise. So, solid choice usng a OEM Suzuki. These filters have a great life span and are pretty cheap. Yes, you can get more expensive ones, but for a bike like this and how often it would be ridden would be a waste. I have used stock Suzuki as this was the best option in my opinion. OEM have never let me down. The quality is awesome, the fitment is always spot on and no bad incidents fitting. No problems at all with them. The old filter was a little tricky to remove due to being stuck in there for some reason. After it came out the new filter was a breeze to fit. Now purrs like a kitten. Thank you Webike. View detail