Reviews
Easiest to use of all the low-cost Wrench's I've used.
The OEM-supplied wrenches are often just a steel plate punched out with a press, and as you know, they are very difficult to use.
Then, if you ask whether Tool Brand's Wrench is easy to use, it's not so easy... UniversalWrench is often too thick for car use as well.
Motorcycle Accessories Manufacturer For Motorcycle I would say that the thin Wrench is very easy to use.............................! It's as it should be! In many cases, it's not so easy to use!
Wrench size should be different depending on the diameter to be sucked in the first place, so a single Wrench will not work well for everything!
In such a situation, this Wrench is very easy to use despite its cheap steel plate punched out!
Although cheap, the Edge of the Hook part is solid, and is a world apart from OEM tools that slip right off, or the cheap ones that are common.
Rear shock, especially Monoshock, is specially designed to be thick and very easy to turn!
No hitting or anything, Hands only." Can be turned tightly.
Conversely, it may not be suitable for thin shocks such as Twin Shock.
For thick Monoshock
Twin Shock may be easier to turn with Steering head's NutWrench
View detail
Used to replace Glass Wool in Silencer
I used it to replace Glass Wool on HUSQVARNA's TE250, which I always use for forest road touring.
To be honest, it was discovered after purchase that the Silencer was rosed with Bolt, and it became unnecessary. However, I tried to hit the Riveter with Drill in one test, destroyed it, and hit a new Rivet with this tool, and it was easy to work with.
The reason I chose this product was the price, which was very inexpensive.
Silencer is a tool that is used only occasionally by those who disassemble the product, so I think this level of tool is sufficient.
View detail
Special Tool is now a discontinued MODEL.
This tool is used for hammering in Stem bearing.
Exclusive Design makes it easy. (and beautifully) Bearing race can be installed.
If the Manufacturer tool is already discontinued, you can have it.
View detail
You can throw away all the other W's except this one.
[How is it used?
The number of large motor cycles with cable-type clutches has increased to two, and although we had a conventional wire injector, it was no longer useful and was left unattended.
I was thinking it was time to clean and lubricate Cable and then I saw the Webike introduction article.
I thought, "This is it! I thought, "This is it! It took more than a month for delivery, but I finally received it the other day and tried to use it right away.
Was the one you received as per Image?
It was bigger than I expected. w The length is about as long as a box of Cigarette.
It seems to be a California-based manufacturer, and although it was manufactured in China, I think the quality is not bad.
How was your experience with it?
Compared to the conventional type of wire injector, Quantity:It takes time and effort to Set.
The procedure is
Turn the body and separate it into two pieces→Pass the Cable through→Attach the black rubber part by wrapping it around the Cable→Screw the separated Body→Lubricate it
I had to shave the tip of the tube to make it thinner, but it is better than too thick because it can cause leakage.
Quantity:Set is time-consuming, but it is possible to properly set theQuantity:If you set the wire injector, it will not leak all over the place and not enter the Cable at all, as is the case with conventional wire injectors.
Every drop of the blow is injected into the Cable and blown out from the other side, which is Large strange and pleasant.
Stress-free.
[Points to note]
Quantity of Rubber parts inside:If the set-up is not properly done, it will leak. Since the structure is sealed at three points including the O-ring and other rubber parts, it will leak if it hardens over time.
There is some concern about durability in that area.
How did it compare to other products?
It is incomparable to conventional wire injectors in terms of leak-free and reliable lubrication.
Exactly Throw away everything but this." W
It is expensive, so it depends on how long you can use it, but I think you will be happier buying this rather than getting frustrated with Gold for a tool you can't use.
View detail
Necessary for disassembling and assembling Engine.
The price is a bit expensive, but it is necessary for disassembling and assembling off-road engines for competition use. The Blue Anodized is like Motion pro, and the Parenthesis is nice. View detail
Can be used as Interiors after measurement
Amazing Gold amount!
I bought it in 2011, 12 years ago. At the time, it cost 7,000 yen, but I remember thinking that I had no choice but to buy it.
The others were between 2,000 yen and 4,000 yen for the Large body.
That is why we felt that 7,000 yen Class was expensive in such a situation.
How is it that it now costs nearly 17,000 yen?
Already, this is nothing short of amazing.
I think that only those who are obsessed with the Valve timing will buy it. I think that only those who are obsessed with the tools for Valve timing are likely to purchase them.
But the thing is just fine!
View detail
Better than ever!
[How is it used?
I used it to make the clutch a little lighter and to prevent the wire from rusting, since the clutch yawer was replaced.
Was the one you received as per Image?
I'm using it for the first time. YouTube." I tried it after watching the video at
How was your experience with it?
Installation was easy and lubrication came out the other side of the Wire with no leaks.
[Points to note]
Be careful of the direction of the rubber packing that fits into the wire, and press the top part at the end to drain out any remaining lubricant inside.
It is
How did it compare to other products?
The Injector I used to use leaked lubricant from the entrance even when the screw was tightened, and only about half of the lubricant flowed out.
It was like they were not coming.
I don't think I will ever use the old Injector again.
View detail
Chain cut is ready!
I purchased this product because it can cut a 530 chain from a 420. I tried several times because I did not know how to use it well, but I was able to cut the chain successfully. If there is an instruction manual, I think I can use it without hesitation. If you press the tip of the Pin against the Pin of the Chain Piece without tightening the Guide, the tip of the Pin will be distorted by the force. Pin tip was distorted by the force. Although the Pin tip is a little distorted, it is working fine so far. If you are a first time user, please work with caution.
The low price made the BALI and Screw parts sore from the beginning, but it was acceptable.
View detail
It's a shortcut.
[How is it used?
Used to replace oil in front fork of TZr250R.
I have changed fork oil several times, but it took me a long time to check the oil level each time, so I bought this to save time.
Was the one you received as per Image?
It was just like the picture.
How was your experience with it?
As is often the case with Yamaha vehicles, the amount of oil to be removed from the inner fork is quite large, since the oil is filled to the top of the inner fork once and then removed to the specified level.
This product is quite slow to suck up Speed. (Piston is heavy) So in that sense, it takes a little time.
However, the work time itself is reduced, so it is worth having one if you frequently perform maintenance.
The scale was also measured by Caliper and was generally correct.
[Points to note]
You should think of a way to secure Fork so that it does not fall over since both hands are occupied.
How did it compare to other products?
I have not used any other products, but I was not sure if I should go with the one-handed guy from DRC.
The DRC seems to have a lower usable oil surface height, so we chose this product just in case.
【Review】
There were no problems with the product itself, and it shortened my work time.
It is not absolutely necessary, so please consult with your Wallet.
View detail
Exhaust Spring removal!
[How is it used?
When changing oil, the drain bolt cannot be removed without removing the exhaust pipe of the exhaust system.
Was the one you received as per Image?
Yes
How was your experience with it?
It was very convenient. It was so good that I felt like a fool for having worked so hard with Radio pliers.
It is only a few hundred yen, so it is worth having if you often remove Spring.
It is useful both when putting it on and taking it off.
[Points to note]
None
How did it compare to other products?
Anyway, it's cheap!
View detail
Easy to use
We also used Adjuster, but it was not hard enough to turn very easily, so we decided to adjust it here.
It is Nutetc. friendly and easy to use with perfect accuracy.
View detail
It's the only way
I had another wire injector, but when I used it, the oil leaked out and it was no good at all. This one, however, did not leak any oil and did exactly what it was supposed to do. The price may be high, but this is the only way to go. View detail
I'm glad I bought it!
I had been trying to bleed the air out of my Motorcycle Brakes by making my own, but it didn't work well. I wasted a lot of time. I wish I had bought it earlier …. View detail
Fits: HONDA XR650 L, HONDA XR650 L, HONDA XR250 R, HONDA XR250 R, HONDA VT750 CD2, HONDA VT750 CD, HONDA VT750 C, HONDA VT750 C, HONDA VT750 C, HONDA VT600 CD, HONDA VT600 CD, HONDA VT600 C, HONDA VT600 C, HONDA FT500(82-83), HONDA GB500, HONDA NT650, HONDA NX650, HONDA RVT1000R, HONDA TL250(75-76), HONDA VF1000F(84)
VFR750F Flywheel removal!
Must-have item to remove the Flywheel due to StatorCoil failure! The puller itself looks like just a thick bolt, but the screw threads and texture are solid! It's a good time to be able to find tools like this quickly, as the number of old motorcycles increases and special tools are suddenly needed. View detail
Inexpensive and can be diverted for Brake maintenance
[How is it used?
I purchased this product for use on an old car during a front forkOverhaul.
Was the one you received as per Image?
For the price, Memory was listed and was of higher quality than expected.
How was your experience with it?
I used to maintain the system by diverting my own work, so it has become much easier to maintain.
[Points to note]
The attached Hose is a bit unreliable as it is a Material that seems to stiffen over time.Material:If you replace it with SiliconTube, no problem.
How did it compare to other products?
I have not used other companies' products, but I appreciate the fact that they are available in the $1,000 range.
▼The syringes have the same capacity as the Active ones normally used for Brake maintenance, so they can be diverted for Brake fluid replacement and air removal, although they must be cleaned, so they are a good value.
View detail
I feel like I've been cheated.
To be more precise, this tool can only be used to remove the Pulley side and to install the Clutch Side.
We don't use Rose's because it is Air, but we wanted to use it for Torque management when embedding...
I managed to fool them into thinking it was better than nothing.
View detail
Common Chain brush
The three-sided type from various manufacturers.
Brush. I used to use it before.
If the Cleaner bounces on the Wheel or
You have to do it twice or you have to worry about the order.
I can't wash my car and now I don't have enough Space for washing my car.
I use Tooth Brush because I can't do it.
I wash the whole car body at once and hose water.
I can use it! I think it would be very useful in situations where
The opposite is Straight's Brush, which I don't know how to use.
I didn't know what to do, so I stabbed it from under the Chain, and the gap hardened.
I used to use it to get dirt off of them, but as a result...
Seal was also hurt to shreds, so that's how I used it.
No recommendation…w
View detail
CRF100F (2007) Used in
Flywheel can be easily removed without any problem.
It is only a tool to remove Flywheel, so I wonder if it is cosmetic. Anyway, the Flywheel can be easily removed.
View detail
The best, but maybe not all-purpose.
Rumored Cable injector guy.
It is actually well thought out and much easier to use than the traditional Injector.
However, the size of the Cable's length adjustment nut is too large because it is made to enhance sealing. (about M8) In some cases, such as in the case of a Cable, the Injector may not be able to bite into the Cable's sheathing thanks to that section.
Also, sticking Wire× I could not penetrate the Grease with Wire grease with high viscosity.
Anyway, it seemed to work well with low viscosity GreaseorOil, and it is a much better tool than the existing Injector.
View detail
MINIMOTO Minimoto Tappet Adjustment Tool 3-Size Set
Fine-tuning of Valve clearance is more convenient than using ordinary tools
The accuracy of the tools is low and I would like to see the system a little more precise.
View detail