Reviews
"Japan" It's a one-of-a-kind Tools Set!
I think it is a tool set for personal level and can be used not only for motorcycle but also for bicycle maintenance.
Except for heavy maintenance, this one (and a few more) will do the job.
The quality is unquestionable, just like in Japan! I think you will not lose anything by buying it!
View detail
It works fine.
[How is it used?
Compressor at home and Air duster of the same Brand (https://www.webike.net/sd/23110545/) I purchased this product in conjunction with the purchase of
I referred to Air duster's product description and chose this Screw size as it fits.
How was your experience with it?
The product itself could be used with no problems at all.
We also installed a Spray gun at the same time, which also came with the One-touch plug, but the Air duster was also included in the package. (Lol)
So, I originally did not have to buy it, but I did, so I kind of replaced it and am using it.
How did it compare to other products?
It is naturally no different in any functional way from the one originally included.
I use it in combination with an air hose of another brand, and I don't see any air leakage because it is a standard product.
[Points to note]
The Air duster of the same brand does come with a one-touch plug!
【Review】
Naturally, there were no problems at all in combination with other Brand's Air hose.
It is inexpensive, but it works well.
View detail
No problem
[How is it used?
Installed Compressor at home for painting and Spray gun of the same Brand (https://www.webike.net/sd/23110537/) I purchased this product in conjunction with the purchase of
I chose this Screw size because the Spray gun said it would fit here.
How was your experience with it?
The product itself could be used with no problems at all.
However, the Spray gun also came with a one-touch plug, so it was not really necessary.
I was so determined that I decided to replace it with this product and use it.
How did it compare to other products?
I have not experienced any one-touch plugs going bad, but they are inexpensive and I have had no problems with them.
[Points to note]
SK11's Spray gun comes with a One-touch plug! (Lol)
Also, I would like to have Seal tape.
【Review】
It is inexpensive, but I had no problem using it. Naturally, there is no air leakage.
Don't forget to prepare seal tape and a 17mm Spanner for replacement.
View detail
When double nut is not available.
I bought this to pull out the sprocket bolt on my SR400.
The reason why we went to the trouble of purchasing the hub clutch is because the SR400 hub clutch has a convex shape for CenterRinging the Sprocket.
This is because the distance between the convex part and the stud bolt is so close that a double nut cannot be used.
I was wondering if I would have any luck using the OEM Nut since it is so thin. Unfortunately, the second one bites only one pile and cannot hang Torque properly.
I had no choice but to buy a special tool.
Still, it was a bit odd to remove the screws because they were coated with screw locks and mine were very sticky.
Fortunately, since it was a RoseRose, access was possible from the back, so I was able to finally remove it by searing it with a raspene, drilling a hole in the center, and pulling out the Torque.
The structure of the Stud bolt remover consists of three Pieces that move and hold the Bolt when it is rotated.
The structure was like a Cell starterClutch.
The screw threads are held in place by the three pieces of the bolt, either on the face of the screw threads or by a line perpendicular to the screw threads, so the screw threads are crushed. Basically, the removed stud bolt cannot be reused.
Since it is possible to engage the stud bolt in the reverse rotation direction, it is possible to loosen the Opposite Thread Screw or tighten the Normal Thread Screw, but as mentioned earlier, the screw threads will be crushed, so it will be a very special application when used for tightening.
It can be used for round bars as well, since it does not need to be screwed structurally.
Maybe it would be good for a sticking Knock Pin or something.
I purchased For M8 this time, so I can use it for Big bike's Exhaust System and so on.
If you have For M6, I think you will have no problem with most large stud bolts.
View detail
MirrorTool！
Nepros is the best MirrorTool available.
It is accurate and lightweight, which is helpful for Motorcycle tinkering.
View detail
The Socket that never misses
First of all, you can't go wrong with a Socket, and I think KTC is just right for motorcycle tinkering. It is a good product with accuracy and strength. View detail
The Larger the Size, the better the accuracy!
I buy KTC for large sized sockets. The price is cheap and the accuracy is good, so it helps me a lot. View detail
Strong!
I don't use Joint very often, but it is a product I worry about if I don't have it.
It is a product of strength, precision and no mistake.
View detail
Adapter with precision!
Adapter of KTC [1/2→3/8] is accurate and just right to pull out and insert. I can use it for years and it is durable. View detail
Precision Adapter
Adapter of KTC [3/8→1/2] has been in use for years and is durable.
It's also good for extraction and accuracy.
Highly recommended!
View detail
Socket with tameness-resistant structure
I like Koken's Socket because of its accuracy.
The Surface Socket is particularly safe because the point of contact is closer to the Center, so it is harder to nick.
I highly recommend this Socket!
View detail
For Torque wrench
Purchased hex bar Bit for use with Torque wrench.
If you have a lot of Bit tools, this one is good for more situations you can handle.
View detail
"cool
[How is it used?
For Axle Nut in CUB?
Was the one you received as per Image?
Yes
Plating is so cool!
How was your experience with it?
Good Ordinary Good
Although the price is high, I don't want to compromise on the tools.
I bought a good one and plan to use it for the rest of my life.
Nepros shines in the tool box with its beautiful plating.
It's too good to be true for Sunday mechanic!
Snap onLevel is a quandary, so I'm not sure I'll be able to afford it.
Nepros is not too expensive if you are tall enough to afford it.
This time I bought it
[Points to note]
No dropping or bumping!
Plating is a waste of time lol.
How did it compare to other products?
Pricey, but maybe cheap if you use it for a long time?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
DriveRecorder - A must-have for installation
I used it to install a DriveRecorder in my car.
I have installed several DriveRecorder units in the past, but most of them were powered by Cigar lighter sockets.
I was worried about whether it was just taking 12V, or whether it was bucking the voltage, etc. So I thought, why not just add a Cigar lighter itself and take it from there?
One of the most exciting things about this product is that it comes with three take-out Fuses. (I will use one of them).
The FuseCase is equipped with a normal flat type, a low profile type, and a MINI flat type, so if you want to make a branch wiring from the Fuse box, you can turn it from other types of wiring. (However, since the end of the branch wiring is attached to the Pipe Type Fuse, it is necessary to prepare the Fuse, FuseCase, and wiring for the end of the Fuse, or to cut the Fuse Gold and make it into a Bullet Terminal. (In this case, if the polarity of the fuse is wrong, the wiring will be directly connected without fuse.)
It is not waterproof construction, so care should be taken when using it for Motorcycle.
View detail
Driven Sprocket Replacement
I purchased this to replace a Driven Sprocket, but could not use it because the Nut seemed to lick when a strong load was applied.
I bought another socket (TONE hexagonal) at Home center and replaced it. The price was about the same.
I thought that a hexagonal shape would be more suitable than a dodecagonal shape because of the torque applied, but Webike did not have a deep hexagonal shape, so I had no choice but to purchase one. I used it once and will never use it again.
View detail
For removal of Bolt from Suspension
[How is it used?
YAMAHA XJR400R (07) The Exhaust System Hanger was used to install the Exhaust System Hanger on the Suspension of
The bolt that fixes the suspension of XJR400R is a 10mm hex lobe bit, but a tamper-resistant bolt is used. I used this product to remove it.
Was the one you received as per Image?
It was exactly as shown in the Image. The texture of the product is good and I can use it for a long time.
How was your experience with it?
It is easy to use. It has a luxurious feel.
It is a product that is not usually used, but it is a must-have when performing suspension-related work.
[Points to note]
nothing special
How did it compare to other products?
The same product is available from other manufacturers, but I think SK11's product has the best Cost performance.
View detail
9.I wanted 5mm.
I use an Impact Driver for APRIO Clutch maintenance, but it only has a 12.7mm 24, and I wanted to use a 9.5mm driver because it was troublesome to replace the Adapter and other parts.
If I use 9.5mm to tighten or loosen 24mm, I may break Adapter or Socket wrench by Overtorque, but I would like to use 12.7mm in that case.
I often use SK11 tools because they are cost-effective.
View detail
For Top Bridge removal
[How is it used?
YAMAHA XJR400R (07 year) Purchased this item to remove the Top Bridge to make the Separate handleSpec.
Not only XJR400R, but also Motorcycle's Top Bridge is fixed with 27mm bolt, but it is likely to be tampered to loosen it with Wrench or MONKEY.
Also, since it is a rare Size, Home center often does not sell it. I also looked for it at Home center at first, but they have 12-square but not 6-square Socket.
It seems that it can be used with a 12-square, but I rejected it because it seems to change the way Torque is applied and I am afraid of it.
Was the one you received as per Image?
It was just as Image.
The only use for it is to remove the Top Bridge, but I am glad I bought it because I will be using it for O/H of the Front fork and for returning the car for inspection.
How was your experience with it?
It feels like an ordinary Socket, but compared to the cheap Socket I usually use, I feel that the TONE-made Socket is made differently.
[Points to note]
The slot is Large, so you need to check the size of your Ratchet.
View detail
Hexagon socket is a hazmat
When I was a teenager who started collecting tools, I heard from a Sale Stalker at a tool store that Hazettes do not crack even when used with an impact wrench (I don't know if this is true or not). This time I bought it because the bolt that stops the cowl of DORSODURO? is 4mm hexagonal.
Hazet is textured with a non-slippery surface, so your hands don't slip.
View detail
Considering the price, I am satisfied with Large.
The fact that you can buy so many sockets at this price is enough to make you feel like a big shot in the arm.
The quality is not cheap or poor, and it is usable in its own way.
Since it is not possible to purchase Single Item, we replace frequently used items with more expensive Single Item when they are worn out. (10mm etc.)
View detail