Reviews
Extension
It is used in a secluded place.
It is convenient to have several types with different lengths for different uses.
Combined with the Compact Ratchet, it doesn't take up much space in an in-vehicle tool.
View detail
Length change
Convenient for use in secluded places.
Combined with the Compact Ratchet, it doesn't take up much space in an in-vehicle tool.
View detail
For Bolt with Sensor
It is better to fit when turning Bolt with Sensor.
You can turn it without it, and even a homemade tool is Large sturdy, but it is easier to buy one if you can.
View detail
For servicing and maintenance use
Affordable price, so much Quantity:Set, making it convenient to use and use.
The Level is sufficient for everyday use and is fine in use.
View detail
For Maintenance
This is a purchase for use in Socket extension for use in Maintenance.
The price is not too expensive, and it is convenient to use three different lengths.
View detail
More than the price
Tools are required to be precise, and I think SK11 has a lot of good products for the price. View detail
It was used in combination with YOSHIMURA's Sensor.
We combined it with YOSHIMURA's Water Temperature Sensor for Progress2 and installed it on NINJA.
I thought that as long as the screw pitch and radiator hose diameter were compatible, I could basically use them.
It worked fine
Blue alumite is Beauty, but unfortunately with NINJA it is not visible at all.
Quantity of Hose Band required for installation:It comes with 2pcs and the accuracy is fine and the machining marks are beautiful.
I think the quality is better than the price.
We recommend it for those who want to raise the price.
View detail
nepros of longing
High-end tools nepros
KTC is more than enough for maintenance, but this is a hobby world.
I'd like to take care of the tools, too.
However, it is not a price you can buy with a bang.
Only frequently used Ratchet and Socket nepros
The construction looks like it took a lot of work for the price.
But it's SK11 that's easy to use.
I don't mind placing it directly on the ground or dropping it a little.
Each time nepros are used, they are gently placed on a cloth to prevent damage to the Large.
If I drop it, I could probably dent it for a day.
Well, nepros is a tool for hobbyists, including that.
View detail
I needed it for RamMount.
I was in a hurry to buy this Screw when I tried to install Ram Mount. I had no idea it was Inch. I chose this one in millimeter because I would never use Inch Screw in the future.
I have to look at everyone's Review properly before I buy.
They turned the Screw of Inch well.
View detail
Just the right length and very convenient
[How is it used?
Purchased to replace Oil in PCX125.
PCX is a little difficult to work with due to the position of the drain bolt, so I bought it to work more efficiently.
Was the one you received as per Image?
It is just as shown in the Image. It is just the right length, not too long and not too short. I felt that the texture is also good.
How was your experience with it?
I actually used it only once to change oil, and I am glad I chose the smaller size. There was a longer size as an option, but if I had chosen that one, I thought that I might not have been able to use it under a car body without space, so I am glad I chose the shorter one.
[Points to note]
Sometimes just a little bit of the tip is left on the Bolt side. However, it is usable without any problem, so Large is durable.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Buy by mistake
[How is it used?
I wanted a 30mm to loosen the Driven Sprocket on my XJR400R, but I was too lazy to buy a 22mm...
I was troubled by the fact that 22mm is not particularly useful.
It's my own fault and I can't help it.
Was the one you received as per Image?
It looked very nice and luxurious.
I am going to use it because it is an opportunity.
[Points to note]
Let's all be careful not to make purchasing mistakes.
View detail
Convenient Socket adapter
[How is it used?
Used for tightening at 40N-m when cleaning and installing Caliper on XJR400R.
I have two Torque wrench, one for ~25N-m and the other for 40-140N-m, but one of them has a 12.7mm insertion angle. (1/2-inches) and the other is 9.5mm (3/8Inch) The Brembo caliper mount bolt is 12mm, but the 12mm socket I have is 9.5mm. (3/8Inch) So I needed a conversion and bought this one.
Was the one you received as per Image?
It was just as Image.
I think you can find them at Home center, but I'm glad to know that they are not available at small places and that it is cheaper to buy them here.
How was your experience with it?
Thanks to this, we were able to tighten it with a solid Torque.
I want to make sure that the Brake area is secure because if anything happens to the Brake area, it will be Large strange.
How did it compare to other products?
I have seen other manufacturers' products, but I think this one is the cheapest and has the best cost performance.
View detail
conversion
I bought it to install a plug wrench on a small type ratchet. View detail
Resin Holder for easy insertion and removal of Socket
This Material is definitely better than Gold:PlasticHolder is easy to use.
Material:The Piece of Plastic Holder is stuck on two Gold rods, and the Material such as Shibuichi, 3/8, 1/2, etc.:It can be used to replace PlasticHolderPiece.
Gold genus products tend to loosen and ruin rather quickly once you start using them. This Holder is easy to insert and remove, and I definitely recommend it.
View detail
Mistook it for a hexagon and bought it.
[How is it used?
I bought this to loosen the Driven Sprocket on my XJR400R.
Was the one you received as per Image?
I did not read the product specs carefully and bought it thinking it was a hexagon, but it was a dodecagon.
It is not impossible to use a 12-square, but the way the Torque is applied changes from a 6-square to a 12-square, and it is difficult to use in places where considerable force is required.
How was your experience with it?
I still could not loosen the force well.
This caused a little damage to the Nut and I failed. This was my own fault, though, so I had no choice.
The product is inexpensive and easy to use.
[Points to note]
Read the product Spec. carefully!
It makes me sad when I buy tools I don't use lol.
How did it compare to other products?
I later purchased a similarly priced hexagonal VERSION.
I think the quality of this product is slightly higher.
View detail
Robust tool.
[How is it used?
I purchased this to remove the Oil Inspection Bolt on the lower side of the Engine on my CB1100.
Was the one you received as per Image?
It is a robust tool that does not seem to break down in the slightest.
How was your experience with it?
I was prepared to remove the bolt because it was the bolt of the engine part of a Large Motorcycle, but it came off so easily with this tool that I was surprised.
[Points to note]
If the Engine Guard or something else interferes, it is a hassle, but it is necessary to remove everything.
How did it compare to other products?
I don't know about other companies' products, but a tool with a sense of security is the best because it is a part that cannot be recovered if it is licked.
▼Although rarely used, it is a good idea to have it on hand.
View detail
handy tool
I bought this DAYTONA long hexagonal socket from webike. It is a set of 7 pieces equipped with a 3/8 socket of 8-19MM. The socket is extended to 63MM to screw some deeper screws. A socket bracket is also given as a gift to store these sleeves well. The steel is of good quality and should last for a long time. -------------------------------------------------- -------- The DAYTONA long version of the hexagonal sheet I bought at Webike. It is a 3/8 sleeve with 8-19mm. The sleeve is extended to 63mm to twist some deeper screws. A socket bracket can also be given a good storage of these sleeves. The quality of the steel should be used for a long time. Powered by Google Translator View detail
I purchased this for Belt tension adjustment of the YamahaBOLT Shoulder Bag.
To adjust the drive belt of the YamahaBOLT Shoulder Bag, a 27mm and 22mm Socket or Wrench is required.
This time, a 1/2 square Torque wrench and a Quantity:Purchased and worked with Set.
Socket and Hex recently purchased and worked on this product because they love TONE products.
There were no problems with quality or accuracy, and the work itself was completed quickly and easily.
View detail
Very easy to use socket holder
Mounted on Tool wagon which I always use in Garage.
Magnet will stick firmly to the steel plate.
Until now, it was necessary to use both hands to remove the Socket from the Holder, but the Magnet is so powerful that the Socket can now be removed with one hand.
I don't feel very Stress when I do maintenance and my work efficiency has improved.
I highly recommend it.
View detail
Reliable TONE products
[How is it used?
Used for removal and installation of exhaust pipe of YAMAHA XJR400R.
I wonder if the product is the same etc. as the 8mm hexagonal.
Was the one you received as per Image?
I checked the actual product at a mass retailer before purchasing and it was as per Image.
How was your experience with it?
I used to use an ordinary hexagonal tool to remove and install the exhaust pipe, but it was a bit odd because I had to use a lot of force in a narrow space. I was also worried about managing the Torque by hand, so I took the plunge and purchased this product, even though it is a bit pricey. After purchasing this product, it can be used for Ratchet and Torque wrench, so it is quite easy to use.
Also, since it is a TONE product, the quality is good and will last a lifetime.
[Points to note]
None in particular
How did it compare to other products?
There were other products at lower prices, but the most decisive factor was the long hexagonal part.
I was concerned about damaging the exhaust pipe if this part was too short, so I chose this product, which is as long as possible.
View detail