Reviews
Expect durability!
I used to use Poshu's Sponge type, but it broke after about a year.
I know this type of product is consumable, but I liked it because of its non-slip and thermal protectionMaterial:I bought this one from Rubber.
It's cheap, but the above two points are effective, and the only thing left is durability.
View detail
For improved grip and a subtle fashion statement!
I customized this product for my off-road motorcycle lever, and I love the improved grip and subtle fashion! View detail
Is good
It is very good for non-slip effect when used on the Lever.
The thicker lever makes it easier to grip and maneuver.
The coloring gives it a custom feel.
View detail
Is good
Lever becomes easier to grip and prevents slipping.
The cushioning is good, so the hand feels better when gripping it, and the hand does not get tired.
It is easy to install, but care must be taken not to tear it.
View detail
Good price
I have installed the Lever Cover on most of the motorcycles in my garage, and when I first installed it, it felt strange because the lever was a bit thicker, but the fit was good and it looked fashionable, so once I used it, I got used to it. I am very happy with the results.
To install, it is difficult to insert the cover into the lever, but if you put a little detergent on the lever, soak the lever cover in water, and slowly and unhurriedly turn the cover round and round, it will go in. Once it is in, make sure to rinse off the detergent and dry thoroughly. Never use lubricant because it will not fit.
View detail
I think it would be good for a small Accent.
I had a hard time installing it at first, but after soaking it in hot water for a while, it was super easy to install.
It looks good and seems to be easier to operate.
View detail
Short Maybe too short for lever.
Installed on the short lever of NisshinHorizontal TypeMaster Cylinder.
The fit is a little worse with the short lever.
However, I don't mind using it because it doesn't make me gap.
It is functional.
View detail
As a measure against cold, it is better than nothing.
I installed it on the Scooter that I use for shopping, etc.
It is installed on Initial ModelBirdCity125 and OEMLever.
I bought this to see if it would help with the coldness of the Lever, which is transmitted even when wearing winter Gloves.
When I actually use it, it's better than nothing, and cold things are cold, but I feel that the speed at which the heat is taken away from my fingertips has slowed down.
It is uncomfortable at first because Lever becomes thicker when you put it on, but it does not interfere with Lever operation because there is an unevenness that matches your finger.
When I put it on, I tried to put it on Lever without thinking anything and I went as far as wrapping the ball of LeBar End, but it didn't proceed from there. I remembered that I used detergent in the impression of other people and I put 1 or 2 drops of kitchen dishwashing detergent in the hole. I put a drop or two of kitchen dishwashing detergent in the hole, and it went in easily.
It moves right after I put it on, but after a few days, it doesn't move anymore.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cross Cub 50, HONDA cross-cub 110
One point on the brake lever
Installed as a dress-up for the CROSS CUB Brake lever. It is expected to relieve the coldness of the lever in winter.
I was able to fit it without ripping it by wetting it with water thoroughly when I put it on.
View detail
To prevent Lever from slipping.
In the winter, I use Heated Gloves, but the Gloves do not have non-slip fingertips, so the Lever slips.
I used to put textured anti-slip tape on the reverse side of the lever, but now the leather of the glove has become rough.
That's when I found this product.
I sprayed a bit of perc on the inside and slid it onto the Lever and installed it.
If you use Silicon spray, it will shift even after you put it on.
The feeling of use is Large satisfaction.
You can now do subtle semi-cracks with electric Gloves.
View detail
It can be used for bicycles.
After polishing the brake lever with Water-resistance Paper, use Silicon spray for easy entry! 。 It can also be used for bicycles, and I think it's easier to make subtle adjustments with this on. View detail
I can hold Lever firmly.
Lever grip is a pain to install every time.
It's a common method, but I use detergent to install it.
It is Large strange to put the head part in every time, but once it is in, it is Large strong.
However, if you struggle with it too much there, it will dry out and the second half won't glide and you'll end up with a thousand pieces.
However, the grip feeling when gripping the lever is completely different between having this and not having it.
View detail
For those who ride with bare hands.
I always ride with my bare hands, so I have a soft touch to operate the Clutch lever (a mystery). View detail
Effective
I use thin Gloves as I use the Handlebar Cover and Grip heater in winter on my PCX125 for commuting and I use thin Gloves.
Then the Brake lever is cold, so I installed this Sponge.
The effect is Large, but I take it off in the early spring because it will be cut off from the edge.
I wish it was a little more durable and 2Season usable or cheaper.
View detail
Be careful not to pull too much.
It is easy to install but you need to be careful not to pull too much to avoid tearing. View detail
It is effective in preventing slipping.
I used it for LEAD110 and Lever, but I think that it is very effective in preventing slipping. It is easy to put on and take off and the custom look goes up. View detail
It ripped when it was first installed!
The Clutch Side was a breeze to install! But Brake Side ripped it up in one shot! Lever is made by the same brembo. The torn one I touched, the rubber is hard and won't stretch! Did you mix the new one with the sifted one, SP Takekawa-san, that's terrible! I trusted you!
Related Videos
[MONKEY125] For some reason I installed the well-received Parts OUTEXSteering stem stabilizer!
https://www.youtube.com/watch?v=4IqK231SbMQ&t=2s
View detail
I think it's good for Parenthesis.
Installation is also very easy, just plug it in.
There is a bit of an Impact around the Grip and it looks good.
I will only use one because it's a LITTLE CUB, but I'll keep the other one in reserve.
View detail
I ruined one of them, but I still want to put it on without giving up.
This is a universal product, so it's not always the same, but it's a good idea to pass it through the diameter of the lebar end. The hole was too small to fit it well. The Clutch Side was installed with better slippage, but the Brake Side was installed while I avoided it.
I couldn't give up, so I bought another one and put it on. When I borrowed a compressor and installed it while wiping the air, it was possible to install it without difficulty. Because there is no Air compressor in the home, I will think about it. However, when the hole is made Large, it is said that it is one advantage and one dislocation after the installation. I think.
Personally, I can't feel the coldness of Lever in the winter and BrakeTouch is anti Linear (lol) is literally a good Cushion for me, as I'm not a good driver. It has become. Even though it's an inexpensive product, I lowered my rating a bit because it was difficult to install, but I'm sure it will continue to be ruined and I think I'm going to buy more and repeat the process.
View detail
Anti-slip, improved grip!
It is installed and used on the OEM Lever It helps to prevent slippage, makes the grip more comfortable, and reduces the vibration transmitted from the Lever When using it on rainy days, use a dry Towel to drain the water out of it If they are still wet, they will shift in position View detail