Reviews
Fits: HONDA VFR800F, HONDA VFR800X, HONDA CBR600RR, HONDA CBR1000RR
Satisfied with cost-effectiveness as For RacingPad
I installed it on Circuit Running's CBR600RR (PC40 2011).
Speaking of brembo's racing pads, Z04, Z03 for endurance, and Z10 recently released are the standard, but they are expensive...
I chose the far cheaper RacingCompound (RC) since it is not used for Solidly's Race.
Before the replacement, it was a replacement from HRC (Honda's RaceParts) N615.
This was not a complaint, but the Quantity:30,000 yen for 1 Set for 1 Vehicle...
The bremboZ03 is a Quantity:40,000 yen for 1 Set for 1 Vehicle....
I was a bit worried about the price of the racing pad, which is less than half of the price of the racing pad, but brembo claims it is "for Race", so I was a bit nervous and had mixed expectations.
bremboRC is a CarbonCeramic system, which means it is not sintered.
Some people think that it has to be Sintered, but in conclusion, there was no problem.
Since the pad brand was changed, the disc surface was peeled with steel wool (Bonnstar) at the time of replacement.
Of course, when we replaced the pad, we also cleaned the Piston and replaced the DOT 5.1 Fluid. We finished it perfectly.
Here are my personal impressions after using it at Sports LandSUGO.
Control is good from the beginning to the back.
The μ at low temperatures is not extremely low, and there is no need to be conscious of heating to raise the temperature.
Even when the temperature rises, there is little change to BrakeTouch, which is a good impression (although it is also a new pad).
Low thermal strain, good strength of back plate
The surface of the disc becomes black due to the effect of heat and the carbon film.
The braking force of △ Full Brake is milder (less potent) than HRC/N615, and it would be easier if it bites a little more.
The amount of Dust powder on the Wheel is small, so it is expected to be more Life than HRC N615.
So I feel a slight difference in efficacy compared to the high price FOR RacePad, but it is a much higher dimension than OEM, and from the Balance of price and Brand reliability, I am glad I bought it.
Since the BrakeCost per pc driven drops to about half the cost, I can add that floating budget to the Tire cost.
View detail
Accuracy...
The hole where the pin goes in was distorted and needed to be scraped with a file. It is not a large problem with a little work, but if you don't have a file, you cannot install it. This is why the quality rating is so low. View detail
Fits: DUCATI HYPERMOTARD939, DUCATI SCRAMBLER ICON, DUCATI SCRAMBLER CAFE RACER, DUCATI SCRAMBLER CLASSIC, DUCATI SCRAMBLER DESERT SLED, DUCATI SCRAMBLER FLAT TRACK PRO, DUCATI SCRAMBLER FULL THROTTLE, DUCATI SCRAMBLER Limited Edition/Italia Independent, DUCATI SCRAMBLER MACH2.0, DUCATI SCRAMBLER STREET CLASSIC, DUCATI SCRAMBLER URBAN ENDURO, DUCATI 899Panigale, DUCATI 959Panigale, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD821, DUCATI Multistrada 1200, BMW R1200RS, BMW R1200R, BMW R nineT, BMW R1200GS
To bremboM4.32.
If there is a fit from Endless, this is the one to choose.
CircuitUser has also been very well received.
Z900RE SE for brembo M4.32
View detail
Sufficient braking power even at low cost
Purchased Repeat for PCX150KF30 Stock.
The first time (approx. 18,000 km) I replaced the Golden Pad by Company D. The second time (approx. 32,000 km) I replaced it with this one because of the price, and I am satisfied with the braking power and control.
I don't do any Sports driving with my PCX150 and feel it is sufficient as it is a consumable item.
The photo shows the current condition after about 4,000 km of driving after replacement, and there is plenty of Pad left.
It is enough if it lasts 10,000 to 15,000 km, so it would be helpful if the replacement is inexpensive for this level of cycles.
View detail
It was used as a replacement from OEM.
I have no complaints with the OEM BURGMAN 200, but when I installed the support plate for the Gold attribute of the Brake Pads, I felt the brake dragging at first, and I was concerned, so I contacted the manufacturer. The answer was that they could not say that it is OK to install without using OEM parts. It gets better after a little driving, but at first I was a little worried because the Rear tire did not rotate when idling.
This is the second time I have purchased this product, but I feel it is not as durable as the OEM because the pad has almost no remaining pad after 6,000 km since the last time I replaced it.
I think DAYTONA's RedPad is more durable and Control is better. I think I will probably not use it for the third time.
View detail
Fits: YAMAHA TRACER9 GT, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100BLACK STYLE, HONDA CB1100, HONDA CB400SF, HONDA CB400SB, HONDA VTR1000SP-1, YAMAHA FAZER8, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CB1100, HONDA CB1100 typeII, HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000
Replace Red with Golden Pad
I have not been able to drive yet because of the rain, but I changed the pad as well as the Caliper OH!
I'm looking forward to running it. ('∀ `)
View detail
Fits: HONDA CB400SF HYPER VTEC SpecIII, HONDA CB400SF HYPER VTEC SpecII, HONDA CB400SF HYPER VTEC Revo, HONDA CB400SF, HONDA CB400SB, HONDA CB400SB, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1100EX, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100EX BLACK STYLE, HONDA CB1100BLACK STYLE
Nice...
I replaced it with a Sintered pad because the Brake squeal would not go away and it was less expensive and seemed more durable.
The pad before replacement came with an unknown manufacturer, so there is no comparison, but it works and does not squeal as usual. 。
Control is much better than I expected, and the effectiveness changes with the amount of force.
It seems to be a bit aggressive to Rotor, which is a concern, but it was a good decision to replace it.
View detail
Fits: HONDA CBF1000, HONDA NC700X, HONDA NC700SXL TYPE LD, HONDA NC700S, HONDA CBR250R, HONDA CBR250R, HONDA CBR1000F, HONDA CB650F, HONDA CB500 F, HONDA CB400X, HONDA CB400SF Ver R, HONDA CB400FA, HONDA CB400F, YAMAHA WR250X, TRIUMPH Tiger 800XC, TRIUMPH Tiger 800, TRIUMPH Thruxton 900, TRIUMPH Thruxton 865, TRIUMPH Street Twin 900, TRIUMPH Scrambler 865
Brake to JackKnife if you apply it strongly ".
This was the first time for me to use the Metal pad, but I have the impression that it works harder than the previous Golden pad.
I grabbed Lever with my usual BrakePoint and it worked so well that I JackKnife'd it unexpectedly.
We are still waiting to confirm the durability of the product, but as for the effectiveness, we are satisfied with it.
View detail
Fits: KAWASAKI NINJA H2 SX, KAWASAKI NINJA ZX-10R, SUZUKI GSX-R750, KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-10R, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R, SUZUKI M 1800 R2 INTRUDER, SUZUKI GSX1300R HAYABUSA, SUZUKI V-STROM1000XT, SUZUKI V-STROM1000, SUZUKI V-STROM1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R750, KAWASAKI NINJA1000
Be careful when making a hit.
I have not purchased this product in a long time.
It is a good quality pad that can be used on public roads and circuits in all weather conditions.
The Control at the beginning of the grip is similar to the Rear, which is useful when the foot is unstable.
Braking power doesn't matter in the rain, and it doesn't become blatantly ineffective like a cheap Pad.
It's a little further back that you'll get decent braking power compared to the Pad, which has a quicker startup.
The braking force is satisfactory for use on public roads.
With Circuit, you have to grip it hard to get enough braking power.
I guess that's what I'm talking about in exchange for Control.
I have no complaints about the release condition of the Pad at my Level.
Compared to the 6POT Pad, if overused, Lever will be in the back.
But that is only at the beginning. If you adjust Lever to a wider range beforehand and start driving, there is no problem.
I think it is a good Pad to use with BPF, in my opinion.
This level is just right for that characteristic of gripping a little and entering with a "scauper" sound, and then returning with a jerk after releasing.
I don't think the price is too high, so I will still be Repeat.
What you have to be careful about is when you make a hit.
It does not work as well as you might think, so be sure to check the effectiveness of the system or there is a high risk of a rear-end collision.
Be careful if you use Brake strongly from the beginning and stop after a short distance.
View detail
Fits: DUCATI Multistrada Enduro, DUCATI Multistrada Enduro Pro, BMW R1200GSW, BMW R1200R, DUCATI Hyper Motard SP 800, DUCATI 959Panigale Corse, BMW R1200GS Adventure, BMW R1200 R nine T, DUCATI Scrambler CR Cafe Race, DUCATI Scrambler CR, DUCATI Hyperstrada, DUCATI Monster Dark, DUCATI Scrambler Flat Track Pro, DUCATI Scrambler Classic 800, DUCATI Scrambler Enduro 800, APRILIA RSV1100, APRILIA RSV1100, DUCATI monster, BMW S1000XR, DUCATI Hypermotard
Good Control property
I have used it with other Large type NKs and was satisfied with the Control property braking power durability.
The brake of the Street Triple 765R, which was added to the fleet, was strong but difficult to control, so we decided to try this one first while we were considering replacing it with a radial master.
It is expected that the back plate is thicker than the standard bremboPad, or that the corners are beveled to a Large width.
Control could be improved without feeling a loss of braking power.
It is good enough to put Radial master on hold.
View detail
Fits: KAWASAKI Z1100R, KAWASAKI Z250FT, KAWASAKI Z750LTD, KAWASAKI Z750FXII/III, KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000P (POLICE), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750FX, KAWASAKI Z750 (air-cooled), KAWASAKI Z400LTD, KAWASAKI Z550, KAWASAKI Z400GP, KAWASAKI Z400LTD, KAWASAKI Z400FX/Z400J, KAWASAKI Z250LTD, KAWASAKI Z750FXII/III
just a minute
I am a little concerned about the weight of the car. View detail
Fits: KAWASAKI EPSILON 150 (Epsilon), SUZUKI ADDRESS (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS V100 (Address), SUZUKI ADDRESS V100 (Address), SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125 (Address), SUZUKI ADDRESS V125S, SUZUKI ADDRESS V125S, SUZUKI ADDRESS V50 (Address), SUZUKI AVENIS 150 (Avenisu), SUZUKI LetsIIS (LETS Two S), SUZUKI LetsIIS (LETS Two S)
extraordinary
[How is it used?
Town ride
How was your experience with it?
cheap
How did it compare to other products?
cheap
View detail
Fits: その他 , その他 , KAWASAKI Ninja H2 CARBON, DUCATI ST4S, HONDA CBR1000RR-R FIREBLADE, KAWASAKI Ninja H2R, KAWASAKI Ninja H2R, KAWASAKI Ninja H2, DUCATI ST4, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER S, DUCATI ST3S, DUCATI ST3, DUCATI SS1000, DUCATI SS750, DUCATI SS750S, DUCATI ST2, DUCATI SS900, DUCATI SS900S
It's probably for the best.
Everything is in balance.
There is no uncertainty whatsoever.
View detail
Fits: HONDA CB250F, HONDA CB250F, HONDA CB250F <ABS>., HONDA CB250F <ABS>., HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R <ABS>., HONDA CBR250R <ABS>., HONDA CBR250R <ABS>., HONDA CBR250R <ABS>., SUZUKI GLADIUS 400 ABS (GLADIUS650), SUZUKI GLADIUS 650 (GLADIUS650), SUZUKI SV650 ABS, SUZUKI SV650 ABS, SUZUKI SV650X ABS, SUZUKI SV650X ABS
SV650Rear Brake Pads replacement
Rear Brake Pads on a 2022 SV650 were replaced.
I have driven about 100 km since the replacement and will post my impressions.
The OEM had about 9,000 km and it was time to replace the Rear Brake Pads, so we chose NTB for its good cost performance.
Operability is gentler than the OEM, and I felt that if I did not consciously step on it hard enough, it would not work as well as the OEM.
For those who prefer a gusto effect from the beginning, I think it will be less satisfying.
View detail
Fits: INDIAN MOTORCYCLE 1130 SCOUT, INDIAN MOTORCYCLE 1130 SCOUT BOBBER, INDIAN MOTORCYCLE 1000 SCOUT SIXTY, HUSQVARNA VITPILEN 701, HUSQVARNA VITPILEN 401, HUSQVARNA TR650 TERRA, HUSQVARNA SVARTPILEN 701, HUSQVARNA SVARTPILEN 401, HUSQVARNA SM 510R, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 450R, HUSQVARNA SM 400R, HUSQVARNA NUDA900, HUSQVARNA NUDA900R, HUSQVARNA 901 NORDEN, HUSQVARNA 701 SUPERMOTO, HONDA XR650 VIGOR, HARLEY-DAVIDSON 1250 PAN AMERICA, DUCATI 800 SCRAMBLER
I was attracted by the Gold color and bought it, but… I was not sure if it would work or not.
I tried replacing it with a Gixxer 250 Rear pad, but the braking force is much weaker than OEM and relies on the Front brake. it may be a compatibility issue with Caliper, but I can't get used to it, so I'm going back to NORMAL. View detail
Fits: HONDA DIO110, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA ZOOMER X, HONDA ZOOMER, HONDA Lead EX, HONDA DIO110, HONDA PCX, HONDA PCX150, HONDA ZOOMER・X, HONDA LEAD 125, HONDA LEAD EX 110
Highly Control
OEM comparison,
Braking power obviously changes.
Touch on Brake lever is surprisingly Mild.
Wear and tear is a little fast.
Aggressiveness of disc is normal. disc replaced at 60,000 km.
The Red Pad is almost identical to the OEM and ends up being about half as durable as the OEM, so the Golden Pad is better as a result.
Braking power should be the first priority because it is more problematic not to stop at a dangerous SCENE.
If you want to replace it at a store, you will have to pay a labor charge. If you buy a Red Pad, which has only about half the life span of a Golden Pad, because it is cheaper, the resulting two-time labor charge will be the same as for a Golden Pad.
In conclusion, Golden Pad has high braking power and good cost performance.
View detail
Fits: HONDA ST1300 Pan European, HONDA ST1100A Pan-European, HONDA CBR1100XX Blackbird, KAWASAKI VULCAN S, HONDA Silver Wing 400, HONDA Foresight SE, KAWASAKI VULCAN S, HONDA Forza., HONDA foresight, HONDA silver wing, HONDA X11, HONDA gold wing, HONDA XL1000V Varadero, HONDA X11, HONDA VTX1800S, HONDA VTX1800R, HONDA VTX1800C, HONDA VTX1800, HONDA VFR800ABS, HONDA VFR
vfr800 rc46Brake Pads
I've got a vfr800 rc46 front wheel Pad that's getting low.
I bought this for my own effect.
Golden Pad is still the best choice for braking performance and durability.
I went with this one. It is a safe performance to ride.
View detail
Fits: HONDA CMX/REBEL250(ABS), YAMAHA XV1700, YAMAHA XV1700, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01, VICTORY Vision Tour, VICTORY Vegas, VICTORY Vegas Ness Signature, VICTORY Vegas Jackpot, VICTORY Vegas 8-Ball, VICTORY Vegas 8 Ball, VICTORY Ness Cross Country, VICTORY Magnum, VICTORY Kingpin, VICTORY Kingpin 8 Ball, VICTORY Judge, VICTORY Jackpot, VICTORY HighBall
Switching from NORMAL
The effect was definitely stronger.
Nevertheless, the Grip force of Tire also has a Quantity:Pair (for Left and Right) The current Pirelli Sport Damon is inferior to the IRC RX-02 when it was the NORMAL Pad.
In other words, I imagine that the combination of RX-02 and this pad works very well.
Other reviewers have written about Fee Rings when reverting Levers, but for someone like me with little skill and experience, I have no idea.
Also, when I apply Brake, I hear a jiggle or some kind of electronic sound.
View detail
Fits: SUZUKI GF250, SUZUKI GSX-R1100, SUZUKI GSX250 SP, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI GSX400R, SUZUKI GSX400X Impulse, SUZUKI GSX750R, SUZUKI GSX750RR, SUZUKI RG400 γ, SUZUKI RG500γ, SUZUKI VS1400INTRUDER, SUZUKI VS1400INTRUDER, SUZUKI VS750INTRUDER, SUZUKI VS800INTRUDER, SUZUKI INTRUDER400, SUZUKI INTRUDER LC, SUZUKI INTRUDER LC, SUZUKI DESPELADO800
Sintered and Pad as OEM
The OEM pad for RG400/500Γ is out of stock and we are looking for a Sintered pad similar to the OEM one. The Sintered Pad is considered to be valuable because there are almost no Sintered Pad made by other companies. View detail
Fits: YAMAHA TZR250, YAMAHA XJR400, YAMAHA TDM900, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA MT-01, YAMAHA FZR600, YAMAHA FZR600, YAMAHA YZF600 THUNDER CAT [Thundercat]., YAMAHA YZF-R6, YAMAHA FZS1000 FAZER [Feather]., YAMAHA YZF-R1, YAMAHA FJR1300, YAMAHA ROADSTAR1600 [Roadster]., YAMAHA ROADSTAR1700 [Roadster]., YAMAHA TZr125 R (4DL) for Front, YAMAHA TZr250 R (3XV) for Front, YAMAHA TZr250 RS (3XV) for Front, YAMAHA FZr400 RR (3TJ) for Front, YAMAHA FZr600 SFAZER 98 for Front
Brake Pads
This is the first time I have purchased and used this Manufacturer's Brake Pads.
I've only replaced them with less than 200km of driving, but the effect is a little softer than my previous Brake Pads.
I think it's like
I am hoping that after a few more runs, it will adjust and become the ideal effect for me.
View detail