Reviews
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA goldwing, HONDA goldwing, HONDA goldwing, HONDA BENLY CD125T (BENLY50), HONDA CB125R, HONDA CB125T, HONDA CB125T, HONDA CB223S, HONDA CB223S, HONDA CB400SS
Delivery Method
This is not a product impression, but it is a problem because I can't place and distribute products when they don't fit in the Post! View detail
Shovel headExhaust Gasket
I replaced it when removing and installing the Exhaust System on the Shovel head. Compared to paper type, this product is easy to handle and reasonably priced. I have no problem using it, and I think it is a good product. View detail
Fits: KAWASAKI VERSYS 650, KAWASAKI VULCAN400S, KAWASAKI VULCAN400S, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZX-9R, KAWASAKI ZX-7RR, KAWASAKI ZX-10R, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI Z1000 (water-cooled), KAWASAKI Ninja 650, KAWASAKI ER-6n
When replacing the Exhaust System, be sure to use a new one.
Whenever I replace the Exhaust System, I always use a new one. At that time, this is a cosmetically good choice. View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD, HONDA XR80, HONDA XR50 MOTARD, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250, HONDA XR250, HONDA XR100MOTARD, HONDA XR100R (for competition), HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XE75, HONDA XE50, HONDA NSF100
Exhaust System Replacement
Reliable manufacturer's product. No exhaust leaks, easy installation!
I always use this product when servicing and replacing Gasket.
View detail
Fits: HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA MAGNA750, HONDA MAGNA750, HONDA HORNET600S, HONDA HORNET600, HONDA BROS650, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FORZA Si, HONDA XELVIS, HONDA FAZE, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Silver wing600
Used on a CB400SF 2016 nc42
As Title
It works fine
The regular price is 550 yen including tax, so the WeBig is priced as is.
Amazon sometimes sells them for around $400, so I guess it depends on Timing.
I use CopperGrease to attach the exhaust pipe to the engine side before using it.
View detail
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Yoshi Yoshi
Quantity:1 Set of 2pcs. would be appreciated.
Since the parts are invisible, the durability will be known much later.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
Used for MD47
It worked without any problems. Costa rica is the best. View detail
Fits: KAWASAKI GPZ600R, KAWASAKI Z250FT, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI GPZ250, KAWASAKI GPZ250R, KAWASAKI GPZ400, KAWASAKI GPZ400R, KAWASAKI GPz400F/F2, KAWASAKI KLE250 Anaero, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI ZR-7/S, KAWASAKI ZX-4, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI Eliminator 250, KAWASAKI Eliminator 250LX, KAWASAKI Eliminator 250SE
no problem
I used it because I needed to remove the exhaust pipe for maintenance.
It looks exactly the same as the OEM Product and I think the quality is fine.
There were no exhaust leaks.
View detail
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Any vehicle.
I use it every time I replace or remove the Exhaust System.
Quantity:It is kind of nice that it is 1 Set of 2pcs.
I guess it would be better to use OEM, but it would take a long time to order, and these are usually sold at supply stores and motorcycle shops.
good point
The number of lineups in the ●Size.
● Quantity:1 Set of 2pcs. so if you use one, you can Stock the rest.
● Easy to obtain.
Accuracy and quality are fine.
A bad point
● No.
Exhaust system replacement is of course a good idea, but if you feel that the fuel mixture is a little strange, you may also want to suspect the Gasket.
Use and reuse are strictly prohibited.
View detail
Fits: HARLEY-DAVIDSON all models of vehicles
the second time
This is my second purchase after 3 years of use. I am purchasing the familiar Ring again as I am replacing it with a new Exhaust System. View detail
It fits securely
It was installed securely. There are no exhaust leaks. I think this performance is sufficient for such a low price. View detail
Fits: YAMAHA TZR50, YAMAHA TZR250R, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZ50, YAMAHA TDR250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA R1-Z
Consumables at the time of Chamber replacement
[How is it used?
TZr250R (3XV1) This was used in conjunction with the Chamber replacement of
I chose KITACOBrand because I felt comfortable with the name KITACOBrand and there were a lot of Impression.
Was the one you received as per Image?
Quantity as described:1 Set of 2pcs.:It is 1 Set for 1 Vehicle, so it is easy to use.
How was your experience with it?
It is a conforming product, of course, but the size and feel, etc., were perfect.
There are no exhaust leaks and it is perfect.
Since it is a consumable item, it is essential when replacing the Chamber.
[Points to note]
It is not limited to this product, but it is good to apply Liquid Gasket as a countermeasure against exhaust leakage if you are concerned about it because it may shift when installing the Chamber.
How did it compare to other products?
Exhaust Gasket for 3XV is quite limited, but I purchased this product based on price, evaluation, etc.
【Review】
Quantity:It is available in 1 Set of 2pcs. and has no performance problems at all.
Although almost no one buys OEM products, they are very inexpensive compared to OEM products, which cost more than 2,000 yen per pc.
View detail
Fits: HONDA All models of SHMODE JF51, HONDA All CABINA 50 models, HONDA CABINA 90 All models, HONDA Grom FNO. JC61-1000001-1299999, HONDA Grom FNO. JC61-1300001-, HONDA JULIO All models, HONDA JOKER50 All models, HONDA JOKER90 All models, HONDA All Giorno models, HONDA SUPER CUB 110 JA07, HONDA SUPER CUB 110 PRO JA07, HONDA SUPER DIO SR All models, HONDA SUPER DIO XR BAJA All models, HONDA SUPER DIO ZX, HONDA SUPER DIO All models, HONDA TACT AF24 All models, HONDA TACT AF30 All models, HONDA TACT AF31 All models, HONDA All TACT AF51 models, HONDA TACT S AF30 All models
Inexpensive, replaced with a new one.
I used this service to replace the Exhaust System on my ADV150.
Since Gasket is a consumable item, we replaced the Gasket in the base of the exhaust pipe at the time of Exhaust System replacement with this product.
When tightening the Flange nut, I can feel the firm crush when it is new, so I think it is easier to manage Torque, so I am glad I was not stingy and used a firm new one.
View detail
Fits: YAMAHA MT09TRA, YAMAHA MT09TRA, YAMAHA MT-09 SP, YAMAHA MT-09A, YAMAHA MXT850D, YAMAHA TRACER900 GT (ToRacer), YAMAHA TRACER900 (ToRacer), YAMAHA TT250R, YAMAHA TT250R Raid, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250X, YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FZ1
Size is perfect? (^-^) /
It is Exactly stuck without Wobble. View detail
To install Full Exhaust System
I purchased this product to install the Full Exhaust System on my ZX25R.
I have driven about 1000 km since the replacement and have had no problems.
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
Necessities for Exhaust System Removal/Installation
The exhaust pipe had been installed and the flange was bent due to over-tightening.
The Gasket was still crushed and stuck to the Cylinder.
With the Pick tool, I forced it off by sticking the Pick while pulling on the Gasket.
Cylinder was cleaned with foam Carburetor cleaner and Dustcloth, and exhaust pipe was cleaned with Oil stone.
When installing the Gasket, it is best to install it on a slightly inclined surface with the Front facing up so that the Gasket will not fall off.
Put in a new Gasket, tighten the exhaust pipe by hand, and set the Quantity:Pair (for Left and Right) Tighten it to even etc.
If you get to the point where it will not tighten, adjust the exhaust pipe up or downQuantity:Pair (for Left and Right) The first time, the client shakes the machine to see if it is settled. Then tighten it again by hand.
When it got to the point where I couldn't tighten it anymore, I tightened it with an Offset wrench at about 90-degrees to 180-degrees to even etc.
If there are no exhaust leaks, the system is complete.
I think it is loose, so I recommend checking regularly or double nut. If you tighten it too much, it is not the end of the world.
I did not take pictures of the work since it is a friend's vehicle.
View detail