Reviews
To the OH of SEROW.
I bought it because it is cheap, around OH above the waist of SEROW. Don't forget about Valve compound. View detail
I am satisfied
We would like to thank Advantage for setting up the product despite the small number of units sold, while the OEM Product has been discontinued. View detail
It's so cool!
To be honest, it's a little expensive for Bolt, but it's just good looking! Use Gold attribute polish regularly. "polish" It is necessary, but it is also part of the fun! Natural Brass color that is not obnoxious." It is also a high point that it does not stand out too much! It stands out casually, so you can see it many times while touring. Where do you sell it?" I recommend it to those riders who know the difference! View detail
Fits: YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA TMAX500, YAMAHA TMAX530, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
Response revival of new cars
Installed on a YZF-R25 (8BK-RG74J).
It was installed without any problem, although there is no mention of a 22 or later MODEL in the compatible car models.
I didn't see any thin fuel reaction, and the amount of inhalation doesn't seem to have increased as described.
I feel like I'm getting a firm suck.
In OEM, if you use a lot of emblems and run for a long time, the oil in the blowback will give you a sluggish feeling.
With this less bellows high flow type, it is not so much of a concern.
I haven't driven the car that much since I replaced it, but so far the Response is the same as it was when it was new.
It seems like it's been going on forever. (It could just be my imagination.)
I think it's hard to see the effect for people who drive Main on flat streets.
I would recommend it to anyone who, like me, commutes daily on country roads with steep grades.
View detail
It was used as a replacement from OEM.
I have no complaints with the OEM BURGMAN 200, but when I installed the support plate for the Gold attribute of the Brake Pads, I felt the brake dragging at first, and I was concerned, so I contacted the manufacturer. The answer was that they could not say that it is OK to install without using OEM parts. It gets better after a little driving, but at first I was a little worried because the Rear tire did not rotate when idling.
This is the second time I have purchased this product, but I feel it is not as durable as the OEM because the pad has almost no remaining pad after 6,000 km since the last time I replaced it.
I think DAYTONA's RedPad is more durable and Control is better. I think I will probably not use it for the third time.
View detail
Sunstar Chain and Sprocket
Paired this together with the SUNSTAR Chain 520 Gold and Rear Sprocket Duralumin. Its better than the stock. Riding felt different when installed View detail
It gives a nice Retro feel.
It was inexpensive, easy to install, and gave a nice Retro feel.
I wonder if old Motorcycles had them.
There was just a little left over after one round of Fuel Tank.
View detail
Easy to use
It is a common Horizontal Type carrying can.
It combines all of the above:ease of use, ease of carrying, and ease of handling.
It is 10L, so the volume is not large, but that makes it light and easy to handle.
Recommended for those who do not have a carrying can or are purchasing a carrying can for the first time.
View detail
For Oil Exchange
I use it all the time when I exchange Oil.
It is not particularly good or bad.
View detail
To
I always use it when I exchange Oil.
It is convenient to dispose of waste oil easily.
View detail
Fits 23-year 400X
I've been trying to find out and inquire if it will fit a 23 nc56 400X.
I could not confirm it, but I was able to install it.
It seems that the brake master is different from the previous generation SingleDisc brake models.
Installation was easy.
View detail
Fits: HONDA Rebel Special, HONDA Rebel CA250T, HONDA CB50JX, HONDA CB50S, HONDA CM125T, HONDA R&P CY50, HONDA XE50, HONDA XE75, HONDA XE75II, HONDA XL50S, HONDA Wave100, HONDA GORILLA, HONDA GORILLA, HONDA CHALYCF50, HONDA CHALYCF70, HONDA SPACY, HONDA SPACY80, HONDA SUPER CUB 50, HONDA SUPER CUB 50DX, HONDA SUPER CUB 50ST
C6HSA
My friend asked me to pick up a spark plug for his HONDA SOLO. NGK candles satisfy me with their quality and stable performance. The choice fell on a candle with a classic potassium number (6). At the moment, the candle is working properly in my friend's motorcycle... View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
530-1010216
Gradual work to improve the performance of the HONDA SUPER CUB 50 CUSTOM engine has led to the need to replace the leading star with more teeth. I did not experiment with manufacturers and looked at the availability of a star with the necessary parameters from KITACO, in their assortment I found the detail I needed. As always, KITACO was not let down, the material and processing quality are at their best!!! View detail
Ideal for fixed Bolt of Generator in TZr50R
[How is it used?
Used during EngineO/H of YAMAHA/TZr50R.
This item is a stainless cap bolt of M5×16mm pich0.8.
The GeneratorBolt of the TZr50R is secured with a + nabe Screw, but it is quite easy to lick.
We decided to replace it with this product.
How was your experience with it?
I used a stainless cap bolt because it is a fixed bolt for the Generator, so I thought it didn't need to be that strong.
No problems at present. We will continue to use it as is.
How did it compare to other products?
I would prefer to replace the OEM Nave Screw with Cap bolt as much as possible as it is surprisingly easy to lick.
[Points to note]
Stainless SteelMaterial, so care should be taken not to apply too much force.
View detail
I made a mistake in the size and couldn't use it, but I'm making it Stock.
[How is it used?
Generator fixed bolt from Nabe Screw during EngineO/H of YAMAHA/TZr50R.
I bought this one with the intention of replacing it.
The result was not usable because of the wrong Size, but we are using it as a Stock for something else.
How was your experience with it?
I think the quality is good enough.
How did it compare to other products?
I don't have anything to compare it to, but I wonder if the price is higher than Home centeretc.
There are many types of this kind of products, so it is easier to find them on Net.
[Points to note]
nothing special
View detail
Fits: HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
Genuine Kitaco Exhaust Gasket for NSR250R
These were purchased due to changing the exhaust too many times in the past and the gaskets were not doing as they should. The correct part was found by simply searching the model of bike and the Kitaco gaskets came up in the search. As these have had good reviews, I decided that I would give these a try myself for this exhaust change. They gaskets were pretty good value and yes, they are only gaskets but they do need to be right. With some other parts in my order, I got them all shipped using EMS. The order arrived in 5 days from being shipped which is perfect. The gaskets came in the Kitaco standard packaging for this item and were well packaged. The gaskets themselves look to be really good quality and there were ne signs of any problems with the size or condition. Absolutely perfect fit and not a leak in sight. Very impressed with these gaskets and Kitaco is going to be one of my go to brands from now on. Great work Webike. Keep it up. View detail
Fits: YAMAHA mio, YAMAHA TOWN MATET80, YAMAHA TOWN MATET80, YAMAHA YFA-1BREEZE, YAMAHA YF100M, PGO MyBuBu125, PGO I-I-CHRAGE125, PGO T-REX125, PGO PMX50, PGO PMX110NAKED, PGO PMX110, PGO G-MAX125, KYMCO Kahlo 100 II, KYMCO Kahlo 100, KYMCO VLINK125SR-C, KYMCO VLINK125, HONDA CD125, HONDA SUPER CUB 50SDX, HONDA XLR80R, HONDA XL80S
C7HSA
We are bringing my friend's SUPER CUB CUSTOM back to normal. We replace consumables, including the glow plug. We take only time-tested spare parts. In terms of quality, everything is on top, without complaints. The engine started working like a Swiss Watch. View detail
![Standard Series Chain 420D Steel [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/10626/420d_TS.jpg)
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, KAWASAKI KLX110L, SUZUKI TS50W, HONDA TLM50, HONDA NSR50, HONDA MONKEY BAJA, HONDA GORILLA, KAWASAKI Z125 PRO, YAMAHA POCKE, YAMAHA GT80, YAMAHA GT50, YAMAHA DT50R, YAMAHA DT50, YAMAHA CHAPPY50, KTM 65 SX, APRILIA TUONO50, APRILIA RX6V, APRILIA MX
420D-150
We are servicing my friend's HONDA SOLO, the native chain has stretched and fallen into disrepair. These chains have proven themselves perfectly, nothing superfluous, excellent metal quality. I'm so used to this that I'm not even considering buying other chains. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, KAWASAKI KLX110L, SUZUKI TS50W, HONDA TLM50, HONDA NSR50, HONDA MONKEY BAJA, HONDA GORILLA, KAWASAKI Z125 PRO, YAMAHA POCKE, YAMAHA GT80, YAMAHA GT50, YAMAHA DT50R, YAMAHA DT50, YAMAHA CHAPPY50, KTM 65 SX, APRILIA TUONO50, APRILIA RX6V, APRILIA MX
420D-150
My friend asked me to help him choose a chain, as his chain is already tired and needs to be replaced with a HONDA SUPER CUB 50 CUSTOM. My friend liked this chain very much, there were no problems with the installation. Everything came up and works fine. View detail
Fits: SUZUKI BANDIT650S(GSF650S), SUZUKI BANDIT650S(GSF650S), SUZUKI BANDIT650S(GSF650S), SUZUKI BANDIT650S(GSF650S), SUZUKI BANDIT650S(GSF650S), SUZUKI BANDIT650S(GSF650S), SUZUKI BANDIT650S(GSF650S), SUZUKI BANDIT650S(GSF650S), SUZUKI BANDIT650S(GSF650S), SUZUKI BANDIT1250S, SUZUKI BANDIT1250S, SUZUKI BANDIT1250S, SUZUKI BANDIT1250S, SUZUKI BANDIT1250S, SUZUKI BANDIT1250S, SUZUKI BANDIT1250, SUZUKI BANDIT1250, SUZUKI BANDIT1250, SUZUKI BANDIT1250, SUZUKI BANDIT1250
Genuine K&N Air Filter for Suzuki GSX650F 2011
This GSX650F came in for a service which included air filter, oil filter and oil change. I decided to go for the K&N filter over the OEM one because you also have the ability to wash, re-oil and re-use these filters. I have never found them to be anything less than the quality of the standard OEM filters and do not have any less performance. As I said, these are reusable if you do it all correctly. This is replacing the OEM Suzuki one which came on the bike when the customer dropped it off. By the looks of it, it has rarely been changed. I dispair how some people manage to run bikes without the slightest notion of maintenance. Finding the correct filter for this bike was easy too, I checked on Webike website and this showed the models that fit each filter. Really easy. I had other items in my order and this then cut down the shipping over the entire order. I use EMS fast service which arrived at my door in 5 days. All the items were packaged really well and bubble wrap and air pockets were used to fill any space in the box. Webike even tape the outer box on all sides so nothing can get in or out. The filter arrived in perfect condition and did come pre-oiled which is also nice so you do not have to mess around the first time. Fitted in about half an hour total. The final result was perfect. A nice clean well oiled air filter ready for a few thousand miles to come. Thanks to Webike for doing a great job and providing a great service throughout. View detail