Reviews
For city driving and a little bit of riding, Recommendation!
Helmet is always necessary when riding a motorcycle.
The hair can be crushed when wearing it for a long time.
Then there's a product that claims it won't crush or steam your hair!
A summary of many of the impres↓ sions goes something like this.
Merit:No hair crush, no steaming, It is easy to install.
Demerit, unevenness hurts (leaves marks), poor cosmetics.
The price of the regular product is 3,500 to 4,000 yen per piece, which makes me hesitate to buy it.
I searched around and found a product that seemed to be OME, so I gave it a try.
In case you are wondering, two for 2,500 yen.
In conclusion, all your impressions are correct.
My impression of the product is that it is just right for city driving and commuting.
Installation:Easy (position is your choice)
Feel:Less steamy (better than not wearing it), hair gets crushed after wearing it for a long time (about 6 hours).
Pain:It doesn't bother me for about 30 minutes to an hour. After that, the weight of the helmet starts to bite into it. 6 hours of wearing it, I had to lift the helmet every time I got a signal.
COSPA:I would buy hats if they cost 3,500 yen each.
View detail
subtle
[How is it used?
Used in Touring.
Was the one you received as per Image?
I had seen it in a supply store and it was on Image.
Was the installation difficult?
No problems
How was your experience with it?
The ventilation feels better and my hair is no longer flat.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The Helmet's Size feel has changed because the top of the head is now tighter.
I wish they would make it a little thinner.
I've heard that it doesn't make my hair flat, so I'm happy about that, but I think the price is high.
View detail
Hair is not flattened.
I don't see any improvement in air permeability, but my hair is not flattened. View detail
That's too bad
For one thing, I was surprised and a bit troubled that the Instruction Manual was nowhere to be found.
One, I made the mistake of buying it without looking closely at the impressions.
I did it as I saw fit, but alas, I did not use it.
I tried to install it on an ARAI RX-7X, but when I put the string through the bracket on the Male side and folded it back, the Button hit it and did not go through.
I also tried with SHOEI's J-Force ? (25mm string), but the Male side also did not go through because the Button was in the way.
View detail
OK for ARAI MZ
I bought it for summer comfort.
I originally wear a cold inner, but when I put this one on, it makes the cover shallower.
Therefore, a just size Helmet may feel cramped.
The MZ has always been well ventilated, but now that it is even better ventilated, it is an essential piece of equipment for summer.
View detail
One-touchSpec. will be w
Clip to make the chinstrap One-touchSpec.!
It took some effort to install, but with the One-touch chinstrap attachment, I'm happy!
View detail
How to remove
I was able to remove it by inserting the radio pliers as shown in the photo and pulling it out strongly while holding it down. I don't know if it can be used again, but I don't recommend it because it is a safety issue. View detail
The Design Is Great
I installed the screw for my Simpson M30 helmet, its looking great, while the original screw has some rust issues, the the kameco screw fitted nicely. Suits the helmet well. View detail
Amazing Craftsmanship!
The material itself is really good, durable. I would like yo buy more if i have too next time, its a good replacement for your Simson Helmet if you miss the screw. View detail
Anti-hair crush!
I use it to prevent my hair from getting squashed!
Some people may find it painful, but once you get used to it, it is surprisingly large and durable.
But it's hard to say because it varies from person to person.
View detail
if that's not possible
Worn on Helmet by Da Bull Ring
Installation was never so easy.
When I mounted it on the Helmet and tried to use it…
The removal didn't feel easy or one-touch at all.
Probably hard to put on and take off with the Gloves on.
I gave up and tried to remove it from Helmet, but I felt like I had no choice but to destroy it.
View detail
Warts on my head…
I'm using it on my SHOEI JCruise, which has been in use for five years and has a dented interior.
I bought this because I use it for my daily commute and can't wash it often, so I hoped it would be less prone to sebum stains.
I am not sure about the sebum stains on the Helmet interior as I throw it in the washing machine whenever I feel like it.
I put one between the interior and the other, so I think it's less likely to stick.
I can't tell if my hair is messed up at all because I have a shaved head.
I feel that the Helmet's Bench effect is enhanced because I feel more air flowing through my head.
The biggest demerit is that if you wear it for a long time, you will get warts on your head.
The Inner Cap is a necessity if you are going to ride for a long time.
View detail
There's a lot of work that goes into it.
At first, it looks like just a Suction Cup and the color is Quantity!:It's like being Set.
The color is solid and the Suction Cup is a little thicker and more durable.
At first, I installed the normal opening and closing Shield as it is, and tried opening and closing work, after all, the solid feeling of the initial use is in the Shield, and the shift of the fixed part is easy to occur, and it seems that opening and closing with holding down the fixed part is certain.
Afterwards this Suction CupQuantity:With the Set installed, it feels much more secure, and I can now open and close it securely with one hand, limiting any shifting or movement of the wearing part when opening and closing.
I used it at high speed, but there is no wobble, and it is fixed Firmly, and I think it is the right answer to install it because I can use it without a problem after installation.
I was able to use it quite comfortably with a sense of security at high speed.
In addition, I think that it is Point to fix it in the position that can hold Suction Cup firmly when mounting it.
View detail
Helmet One-Touch Clip
I installed it on ARAIHelmet.
The belt width of ARAI is 25mm, so I chose L Size. I'm satisfied with it because I can remove it with One-touch, but it's hard to use it with Glove on.
View detail
It's not durable.
I used to ride Motorcycle about once a week and the Hinge cracked after about a year.
Because the Converter itself is thicker, the gap between the Shield and Helmet has widened and wind entrainment has increased.
Material:I did not feel Merit compared to Aluminum's Converter.
View detail
More than I thought!
No quality or texture problems. As for the effect, there is no feeling that the wind passes through the Helmet at all because I put it on. However, there is not a feeling of stickiness when I take off the helmet, so there may be ventilation.
What I like about it is that, as others have said, it doesn't crush my hair. As I get older, the volume of my hair decreases, and when I take off my helmet, I get a weird hair style like Inner shape, Martian, and first of all, I don't scrunch my head with water with Toilet anymore. It's a breakthrough for me! I think I'll wear each Helmet individually. I don't get any headaches from the Toilet at all. I've been using it for a few years now, and it's a great product.
View detail
It might be a little large for women. 。。。。
For those of you with XS to S Full face helmet, you may need to get a little creative.
I wear a S Size Full face and when I went Touring for half a day with this product on, I got marks on my head and headaches.
I thought it would be different if it was a Jet type Helmet.
View detail
It won't crush my hair!
Just wear it inside your Helmet and it won't crush your hair!
The only thing to remember is to wear it behind the hairline on your forehead!
If you don't, you'll have a warty mark on your forehead like a Krillin.
Some people say it hurts, but I'm Large and strong.
View detail
It won't crush my hair!
Just wear it inside your Helmet and it won't crush your hair!
The only thing to remember is to wear it behind the hairline on your forehead!
If you don't, you'll have a warty mark on your forehead like a Krillin.
View detail
Saved me wasting money on a new helmet
My wife's crash helmet isn't used much and a few weeks ago the male part of the helmet strap was lost on the road. I saw this Kijima helmet buckle and bought it because it seemed cheap. Fitting was very easy, no sewing or cutting required. The hardest part was removing the old helmet clasp. My wife finds it easy to fasten and adjust using the strap and equally simple to remove. View detail