Reviews
It's cool.
This is good.
I was fascinated by the very eye-catching Design when I saw it during the Net introduction.
So I went to the store and the real thing is even better. The texture is good, and you don't feel like you are buying a cheap product. the Graphic model was cool, but the Black Helmet I have on hand satisfies my desire to own one.
The interior fits reasonably well and feels secure. In my case, I usually wear a medium size, but the large size fits me perfectly.
My concern is that the wind noise may be a little Large, which may be due to the Visor. I recently purchased a Full faceKit, so I will try that to see how much of an impact it has.
Also, Income is not easy to install. I didn't want to do it too much, but I decided to attach Income with the included Seal.
Considering the price, I am generally satisfied with the product, and I would recommend it to anyone who likes the Design!
View detail
Almost a must-have product
[How is it used?
I use it every day.
Was the one you received as per Image?
Yes
Was the installation difficult?
I think anyone can do it with Hexagonal Wrench, so I think it's a level of difficulty that anyone can do.
How was your experience with it?
I would recommend this product to all Eliminator riders, as the OEM was difficult to use and some helmets could not even be applied.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
If you have taken delivery of an Eliminator, I think you should buy it first, it is inexpensive and easy to install.
View detail
Mirror is quite thin.
Installation is very easy and requires no special tools.
Mirror is quite thin, and before installation I can see right through their faces." However, when used outdoors, it seems to be surprisingly translucent.
Color:I chose Sky Blue, but the vision is yellowish.
It is uncomfortable at first, but eventually your brain compensates and you don't care.
but the visibility is still NORMAL. [Color] Compared to Clear, it falls off. It feels much darker, especially when entering Tunnel.
I knew that, but it seemed darker than I had imagined, Visibility." is -2
Also, the Shield is now hard to raise and lower. Quality and texture was set to -1.
View detail
72JAM Shield
I have wanted a 72JAM Jet helmet for a long time, and with that Shield, bingo! It's the best! View detail
Cospa best
[How is it used?
Helmet hung on Mirror and locked.
Was the one you received as per Image?
Street Image
Was the installation difficult?
In my case, it was a little troublesome because I had to remove the brake lever to install it, but it's easy to install if it's in an easy-to-mount location.
How was your experience with it?
Hang your helmet on Mirror for peace of mind when you leave your motorcycle
[Included Parts:were they on?
No
[Was there anything that disappointed you?
nothing special
With or without Instruction Manual
As an anti-theft measure, the mounting screw is hexagonal, so it can be easily removed with a tool.
View detail
Might as well take the first step...
When I was looking for a model with Inner Visor, SHOEI was expensive and KABUTO's Graphic was not to my liking (Pin lock is not standard either!!!). So, when I was wondering about it, I came across it.
I was worried about the fitting for FOR JAPAN MODEL, so I checked it at the store where the actual product was placed, and the fit of my head, which is usually M for SHOEI and M for KABUTO, was just in the middle of the Image for LS2 (15 minutes wearing).
After actual use (about 6 hours of rest every hour and a half or so), I was able to use it without any concerns.
I would have been happy to give it 5 Stars,
Paint may be weak...Paint was chipped off by tipping (I don't remember any domestic model having paint chipped off by tipping).
As other people have said in their impressions, the air flow from the upper Intake to the domestic MODEL is very small, and the air flow from the upper Intake to the domestic MODEL is very small.
It is difficult to feel (? not to say it is not effective, but it is difficult to feel)
Therefore, we gave it 4 stars.
However, considering the design and price, I think it is highly satisfactory.
View detail
attachment (Removal before) is difficult, but worth the effort!
Spare parts for N60-6SPORT, a new model of 2024.
Purchased as it can be installed on N60-6.
Was the one you received as per Image?
This is the Spoiler of the image itself.
Was the installation difficult?
It was difficult to remove the existing Spoiler before installation.
[Included Parts:were they on?
No Instruction Manualetc.
[Was there anything that disappointed you?
NO
Points of installation and hang
Removal of existing Spoiler.
As you can see from the RASSpoiler, there are three Hooks.
First, lift and remove the Rear Hook,
Next, remove the top of the head by pulling it backwards,
Finally, remove both SIDES as if you were lowering them.
It all takes a lot of strength. It may not be possible for a girl to do it….
Please refer to the image.
Notes
After installation (Naturally it is) Inside the Spoiler you will find (Spoiler must be removed). unaffordable
Helmet, inside Spoiler should be Beauty.
Also, if you touch the inside side of the Spoiler during installation, fingerprints, etc. will be left behind (laugh).
Items to buy together
Interior removal spatula for 4-wheel (Material:Plastic) might make things easier.
View detail
JapanManufacturer reaffirms its excellence
Bagnoia MODEL has a 22-year Replica. (In Japan) I bought it right after it was released, as it was a fulfillment of a long-cherished wish that I had had for over two years, as it had never been released. The shape is completely different from JapanManufacturer's, and the parenthesis is very nice. However, the functionality is not as good as the JapanManufacturer.
Size Sensation
Larger than Arai and SHOEI.
The Cheek Pad is quite tight, but other than that, the entire head is not held except for the cheeks, which are large. The entire head is not held like in Japan, and the shallow fit makes the wearer feel uneasy about taking off the head at high speeds.
I was a medium size.
The wearing feel is completely different from Arai and SHOEI, and is similar to AGV, including the Size feel. (No experience wearing Manufacturers other than Left Ki).
The Arai L size is my usual favorite, and although it is slightly larger than the Just size, it does not gap at high speeds. It does not give me any headache and is an ideal fit.
Large size of the cap
The cap size differs between M and L, so it is quite Large compared to Arai's L. (Arai caps are the same for M and L)
[Weight
It is light for its large size, perhaps due to the use of carbon in some parts, but not enough to impress.
Finishing
Do not expect the quality of Japan.
[Shield]
The Shield itself has no distortion, and its resistance to fogging is much better than Arai. The Shield itself is not distorted, and its resistance to fogging is much better than Arai's.
Wind Cutting Sound
Quite Large compared to Arai, uncomfortable. I was surprised at how different they are.
[Ventilation
Arai's RX-7X is far superior. In the first place, I couldn't feel the wind escape at the top of my head….
【Review】
It must be a pretty good product for the price." If you buy it thinking that you will regret it, you will surely regret it.
Design is good, so I think it's Collector's Items or something to show off to those around you.
Arai's RX-7X, which is less than half the price, is far superior in terms of functionality. The only thing I felt was better was the Shield connection.
Ironically, it was a kick-ack reminding me how great JapanManufacturer is. I am an AraiUser, so perhaps I feel that way more than I should.
View detail
Fishing adjustment for Helmet.
If you choose a loose size, there will be a gap above your head and the position of the helmet will not be stable. In such cases, the Universal Fishing Spacer comes in handy. There are three different thicknesses to fit the gap. Cut and use according to the shape of the interior.
This is the second time I purchased this product. This time I used 6mm because the gap is small, and I cut and pasted it according to the shape of the foam so that it would not obstruct the airflow of the helmet.
Before Fishing, I had trouble with the Glasses hitting or being held in my ears each time I put it on, but after the Fishing adjustment, the position of the headband became more stable.
If you feel that Helmet is not loose but not stable, try it.
View detail
Shield base is OEM Product
I have been using Mirror shield from SHOEIOEM.
Impressions https://imp.webike.net/article/609046/
Gold Mirror has been stripped and replaced.
This product is a mirrored version of the original SHOEIOriginal base product. Therefore, the transmittance is the same as that of the OEM Product.
We have a lineup of colors that are not available in OEM Products. [Color] I went with Smoke/Blue.
Fitting is not a problem at all since the base is an OEM product.
The difference is that the OEM Product is fully Mirrored, but the sides of this product are not Mirrored. It doesn't matter. As long as the price is lower.
Visibility is fine during the day. Tunnel is also Large sturdy if run slowly.
It is important to wipe the Mirrored Shield gently with a wet Dustcloth.
Chemicals are a total no-no. It will peel off.
It is also no good if it is still wet from rain, etc. It will float.
View detail
First full face helmet
I was anxious about wearing a full face helmet for the first time, but when I put it on for the first time, the visibility was as wide as a jet helmet, and I can't say enough about how impressed I was with the touring. View detail
Goggles Type
[How is it used? Replace with Clear shield
Was the one you received as per Image? as-is image
How was your experience with it? It was good
[Points to note] Better Mask through the nose.
How did it compare to other products? I have nothing to compare it to.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I put it on my SHOEI EX-ZERO.
I put it on my SHOEI EX-ZERO.
It is a Universal Product, but the design is good and the length of the Visor is just right.
It is a necessity for the coming season.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
Pin lock, excellent anti-fogging effect
I chose the dimming Type.
When exposed to ultraviolet rays, it becomes dark during the daytime when the sun is strong because it is firmly Black, and when the sun goes down and it gets dark. [Color] It is a convenient Pin Lock Shield that will become Clear.
It is more expensive than other colored ones, but I feel that it was not an expensive purchase as it changes with the weather and reduces Stress when driving.
I am currently using it on my touring helmet and am considering installing it on my commuting helmet as well.
View detail
![ULOOK Blaze Mirror] Anti-fog Film for CPB-1V Helmet](https://img.webike-cdn.net/catalogue/images/133234/4color_TS.jpg)
Fits: Others Compatible with CPB-1VShield, Others Glamster
U-LOOK Blaze MirrorAnti-FogSeat
[Color] As a Smoke Mirror shield user, the ability to convert the OEM Clear shield to Mirror will help prevent the Mirror from peeling off due to cost savings or pebbles, etc.!
No distortion and the view is easy to see in Mirror.
View detail
Effective use of space
Purchased to organize Garage.
Type B has a deep hooking area.
It will not roll off even if you hit your head from below with the Helmet hooked on.
Recommendation is to install it in a position where it will not hit the head.
View detail
Surely this is useful.
However, the helmet lock of CRF250L I bought this year is located near the rear fender, and it is indeed difficult to hook the helmet, so when I used this KIJIMA's Helmet lockAssist, I found it very easy to use. It became easy to use at a stretch when I used this KIJIMA Helmet lockAssist.
I usually leave it attached to the helmet lock and hook it up, and remove it when I use the helmet lock.
It is a very simple Ideas product, as all you have to do is pass these Parts through the DRing and hook it to the Helmet lock, but it is certainly useful.
It depends on the position of the helmet lock, but if the position of the helmet lock is not quite right and it is difficult to use, this is a convenient product that I recommend.
View detail
![[Repair Parts, Optional Parts] RS-1 Rear Spoiler](https://img.webike-cdn.net/catalogue/images/125897/RS-1_TS.jpg)
I feel like an EWCRider.
I have purchased a thunder c gp, which I have longed for, so I added it to my collection.
I found a careful explanation on the LS2 website, so I worked with that as a reference.
Firmly peel off the Defferential Gearo Spoiler attached to the strong while warming it up with a dryer.
If you heat the double-sided tape strongly, it will be easier to peel off the double-sided tape, but it must not harm the cap, so just warm it quickly and peel it off with the determination to break the Defferential Gear or Spoiler (laugh).
I'm guilty of breaking my new Helmet (laughs).
The description also said that the Defferential Gear form spoiler is not reusable. However, it is not easily broken and can be reused after applying a new double-sided tape.
Once the tape is peeled off, the glue from the tape is removed with a label remover and the adhesive surface is cleaned with silicon remover. This is the most large and strange part of the process.
The tape was temporarily placed on the surface and positioned at key points, and the chili feeling was memorized with the fingertips.
At any rate, I am Large satisfied with Parenthesis goodness.
However, it is a little disappointing that the Rear Emblem is hidden.
I would like to try the effect with HelmetBody at Circuit next time.
View detail
for quick use
Was the one you received as per Image? It was just as Image.
[How did you feel about the Fit? I am usually a L in ARAI/SHOEI, but this is a little larger. I think it may be the difference in the thickness of the interior.:It was about Free's Helmet.
How was your experience with it? It is well priced, but satisfactory enough.
What are the specifications of the product? One-touch chinstrap is easy. Part of the interior also comes off.
[Was there anything that disappointed you? There were some stains on the surface that looked like some kind of hand dust, which bothered me, but I was able to wipe them off. It was a matte finish, so I don't know if that can be helped. Was this an item that was exchanged or returned?
How did it compare to other products? It is not as bad as products in the same price range.
View detail
I wanted it to be included from the beginning... Helmet holder
Easy to use and reasonably priced. It is a satisfactory product if you are not particular about the price! View detail