Reviews
Not available for 2023GROM
I purchased this product because it was indicated that it could be installed on a 2023 GROM, but the type of the Air Cleaner Box has changed from the previous model and it cannot be installed immediately.
There is an intake on the Engine side at the far end, which is inaccessible. It might be possible to install the unit if all the ducts were loosened and removed, but I decided not to do so because it would take too much time.
It was a waste of time, so I installed it in the intake of the box in front of the Air Filter.
Does it seem to be effective from where it is installed? Or not?
I would like to believe that there is.
View detail
Fits: HONDA Ape 50, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100
I was resistant to Funnel, but ??
I was afraid that the Funnel would suck in Dust, Garbage, etc., but I am not worried because of the inner and outer double Net and the Sponge-like Filter. 。 The air is more beautiful than the previous Power FilterSpec. The best thing is that it is lighter than that, and it is a recommended point as a vibration countermeasure for 2-stroke carburetor. ?? View detail
Fits: HONDA Ape 50, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100
The APE can be found at ・・・・
I purchased this carburetor and installed it in order to prevent dust from being sucked into the carburetor while driving on the street, but the intake resistance was much greater than I had imagined. In addition, the carburetor protrudes to the Right on the APE, so the Rubber that stops the Net when the carburetor hits the thigh while driving is not able to be used.
Gap and before I knew it, Net and Sponge were gone. Now I am using Funnel with JAM's 3D Air Filter (Right Side Cover needs to be removed or partially cut).
View detail
Cost performanceOK
This Funnel seems to be an Original product of PMC? and less expensive than those of MikuniBrand and YOSHIMURABrand.
I bought a slightly longer 40mm for my Φ36 because it seemed to be well stocked. The shape is not too curl, simple and beautiful, and I have a good feeling about it.
TMR's Funnel has a rather fine and thin-walled Pitch at the mounting Screw, which gives the impression that it is a little Large strange to make, but there was no problem at all in using it, and I was highly satisfied with it.
Unlike KEIHIN's CR and FCR Carburetor Bodies, TMR's Funnel is available in various lengths for each caliber, so the lineup is diverse.
KEIHIN, which has only Small body and Large body, is more universal.
(Unless you own several Motorcycles, I don't think you need to worry about this.)
In addition, Mikuni's Funnel is difficult to buy because the Spec. is difficult to understand when purchasing, and as of now, there are so many items that are listed as missing in WeBig.
Some things have strong funnel curl, some have no curl at all, some have holes in the edges of the funnel, etc. There are other detailed Spec. besides YOSHIMURA's Dual stacks.
I think it's just the wide variety of products that are missing.
I am wondering how TMR determines the Funnel Spec. at the time of shipment. Is the optimal Size selected by the distributor for each car model?
Some have a very short funnel, some have a standard 50mm funnel, etc. This is also a confusing area to buy for hanging.
In this case, it would be more efficient to distribute without Funnel anymore.
View detail
It didn't work. (My mistake)
My AF24TACT with AF34LIVE DIO carburetor installed. (This product) The diameter of the lens was just a little too small. The diameter did not fit and I could not install it even though I tried to modify it and force it to fit. It is a pity because it is very cool. It is my mistake that I bought it without checking it carefully. View detail
There's a change in the second strike.
Used for YamahaPOCKE with AIRSALAluminum cylinder. I recently switched to TM24Carburetor, so I tested DSFunnel, which I have been interested in for a while.
Many people say that funnels are meaningless for 2-stroke engines, but if the velocity of the intake air is changed, some change in the filling efficiency of the air mixture taken into the crankcase can be felt, can't it? I think so.
When I actually tested it, it was clear that the rise of Torque in the low to mid RPM range improved. On the other hand, there is almost no change in the high RPM range. In general, I think Merit is the best choice for Main for city driving.
After that, the bridge section of the Adapter was modified to look like an airfoil section and the inside of the 2nd funnel was BuffingPolished to improve intake efficiency.
View detail
Fits: KAWASAKI Z750-1000 Series Normal VM Carb, KAWASAKI Z750-1000 Series Normal VM Carb
Cheesy
I think it's cheap and not worth the Gold amount.
It looks almost like a cheap Chinese product. It is more meaningful to pay a little gold for a better one or buy a Chinese one.
View detail
Expensive, but I'm satisfied.
I am looking forward to the compatibility with SPEC-A in Yamamotracking without a doubt. View detail
Recommended!
Intake sound was improved and acceleration was increased!
It's expensive but … recommended!
View detail
Custom look
I added this Dual stack from the beginning.
The actual effect is not known.
I am okay with it because it gives a custom look and feel.
Installation is very easy, as all you have to do is turn it and attach it.
View detail
Funnel
YOSHIMURA's Parts that also serves as a bonsai View detail
Beauty and smooth, high quality!
[How is it used?
When we purchased VM22carburetor, the intake side was a delicate 40mm in size, so we could not handle it with what we had on hand, so we purchased this relatively inexpensive Funnel.
Was the one you received as per Image?
It came in a simple Vinyl bag, but the quality was high, Beauty and smooth. The joints are also Exactly and feel good.
Was the installation difficult?
Easy installation by simply tightening with Screw.
How was your experience with it?
Functionality is not a problem. The funnel is a little long, so it seems to be able to cover some of the rain,
[Included Parts:were they on?
None in particular, but Screw is included.
[Was there anything that disappointed you?
Nothing in particular, and
Net can be used to prevent contamination with worms and large pieces of garbage.
View detail
Ideal for pc20.
Colored and installed.
If it breaks, I can buy it again at a price I can afford.
I do not expect it to be durable.
View detail
Fits: SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S
OEM Parts Like
Quantity of Grommet and PlusScrew clamping Screen:Set....a helpful price in the face of rising prices for OEM parts?
I think it is a common occurrence in KATANA that cracks are caused by over-tightening the screen, but I think cracks are caused by being caught in a hard base simply because the screen is tightened with only a rubber washer or plastic washer.
As you can see, the grommet is built more like a damper than a washer.
Since KATANA's screen is in essence a floating mount, I wonder if it will be replaced by timing, such as when the screen is felt to be jumpy while driving at high speeds.
I think it is probably made of EPDM or something similar with excellent weather resistance.
View detail
Replace obstructions on intake side.
It is easy to work with because all you have to do is remove the OEM funnel from the air box, insert the box between the OEM funnel and fix it with Screws to prevent it from turning around and put it back in place.
However, when tightening Screw #2.3, a Hexagonal Wrench of 1.5mm and 15mm or more is required.
View detail
Not bad looking.
It's a little pricey, but it's cool and not cheap. View detail
As expected of YOSHIMURA, accuracy is good.
The price is good, but the performance and build quality is good.Normal is fine, but I changed my mind and went with OrangeAnodized. It looks beautiful.
The effect seems to start at lower speeds than with Funnel alone.
And the suction sound is now audible to Direct.
I think the item is worth the Gold amount.
View detail
if you have a budget...
if you have a budget, it's not cheap... If you have the budget to buy it, it is the most suitable with MWR air filter The effect is better than the original velocity stacks, but I don't have an answer to how much the effect is... After all, the MWR air filter effect is really high!! View detail
Worth a try
Purchased MWR High-Performance Velocity Stacks because I use MWR air filters The air filtration of MWR is very good I haven't installed velocity stacks yet, I'll report back when I use it View detail
Trickstar
About quality and texture= Good quality About the feeling of use= Waiting to install Products to buy together= Power intake Difficulty of installation=Easy to install View detail