Reviews
Hole concealment of fret & mdash;厶
Holes were drilled and painted Silver. View detail
fast in delivery
It arrived quickly. I'm glad I didn't have to deal with the cold. View detail
replacement
It is nice that they sell only one side for replacement of broken parts. The product itself is warm enough even with gloves on, and having the Switch at hand is easy to use. View detail
The explanation is hard to understand for an OEM Product.
It's OEM, so the length is nice. However, the schematic of the pullout did not show the location of the Controller, and I noticed it when I was looking at Motorcycle's undercarriage. I wanted it to be a picture at least. There are many kinds of bundle wire Band, but they are too thick to fix the Harness and cannot be used as instructed. View detail
Replace only Left when replacing Handlebar.
Originally used HG115.
When replacing the handlebar, the Left Side could not be removed cleanly and could not be ported.
Because the inner elasticity is Zero, if it is bonded, I have to break it and remove it.
We were glad to be able to sell the product in component units and not have to buy a complete set.
View detail
I'm ashamed to admit...
I'm ashamed to admit that I put the Grip on before I put the Controller on, and now it's too late.
It is impossible to remove it again with reusable Level, so I had to buy a new one at Repair Parts.
The result was expensive, but the Quantity:I'm glad it's still better than buying 2 Set. (;^ω^)
View detail
Fits: HONDA cross-cub 110, HONDA Super Cub 110
Exclusive goods
Grip heater made by Endurance with voltmeter function was selected in preparation for cold wave attack.
I checked the actual vehicle to purchase UniversalThrottle pipe.
JA10 is Throttle Cable1 pc pull…
The successors JA45 and 60 are Quantities:2pc pull not compatible…
I searched the Net for help from my predecessors.
Quantity:There is also an atmosphere of processing and using 2pc pulls…
I bought Endurance's exclusive products honestly.
Grip heater has been installed many times in other cars.
Finished quickly, no problem because it is a dedicated product.
Fingertip problems. [Color] Clear!
I never felt cold when I was in my 20's. Is it age?
View detail
Repair Parts was purchased
Well, it is just Repair Parts, so there is no evaluation.
But I really appreciate that the products arrive quickly.
I would use them again in the future.
View detail
Repair will last a long time if there is a Repair.
It's not cheap, but it's not wasteful to replace only the broken part rather than the whole unit. I needed to replace a broken wire on one side, so this was a great help. The quality is also very good. View detail
Heater cannot be installed without it.
Used to install Grip heater on HondaFORZA250 (MF15).
https://www.webike.net/sd/23837151/
View detail
Fits: HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring
I used it on my MT-07.
It seems to be too long for MT-07.
It works fine, but you have to push Harness under Tank to make it fit.
The Coupler of the Attachment power supply needs to be modified to fit the MT-07.
View detail
Careful packaging and fast delivery
I have received it well. Since it is a genuine part, there is no worry about the quality. The packaging was meticulous and the delivery was surprisingly fast. Now we are almost ready for winter. I am very satisfied that I can buy it during the sale period and receive it at a discount, and I can receive it sooner than if I ordered it in Korea. ------------------------------------------------------------ -------- I have received it well. It is not worry about the quality because it is genuine parts. The packaging was also meticulous and was surprisingly fast delivery. Now that you are ready for winter. It is very satisfied with librarian discounts in the sale period, and can be received faster than ordering in Korea. View detail
Cb650r 2021
Bought a few things from webike recently (I am in the uk) not been let down, this loom fits perfectly and is plug and play as expected with the Honda sports headed grips, perfect! View detail
I bought it cheap
Delivery was fast and I bought it because it was not officially imported from Korea, so I installed it without difficulty because it was made easy to understand how to install. ------------------------------------------------------------ Delivery was fast and I bought it because it was not officially imported from Korea. The installation method was made easy to understand, so I installed it without any difficulty. Just because of the nature of the cowl of Honda scooters, it is very difficult to disassemble the cowl and the paint may be broken. Powered by Google Translator View detail
Finally ready to use, happy
This wiring harness is to be used with the electric heating handle. This accessory can only be found on the instruction manual of the electric heating handle. It is recommended that this wiring harness be sold together with the electric heating handle. It is sold on webike. Now it can finally be used. There are a total of three heating gears, and the overall feeling is good. Sometimes the hands of the highest gear will still sweat, and the electric heating handle is still necessary. -------------------------------------------------------- The harness is to be combined with the use of electrically heated handles, this accessory only in the purchase of electric heating handle this specification can be found in the corresponding model, it is recommended that harness combined with electric heating to close the sale together, hard to find this, but fortunately, It has sold webike above. Now finally ready to use, with a total of third gear heating down overall feeling good, the hand will be sweating up a file sometimes use electric heating as well as the necessary income. Powered by Google Translator View detail
Fits: YAMAHA GDP125 A (NMAX) 16- 2DS2, YAMAHA GDP150A (NMAX150) 17- BV43, YAMAHA Tricity 155, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-25
Ideal for NMAX Grip heater installation
When installing the Grip heater, the OEM ThrottleGrip requires some modification. It's not that difficult to process, but it was a hassle so I bought this Throttle. Of course, it's OEM, so accuracy is no problem. It's a pimped out version so it's easy to install. View detail
This will be a DIY style custom.
"I bought it because I wanted to supply the Hot grip from a USB power supply since I put a USB power supply on it. But 、、、、 what to do on a rainy day.
It's time to cover the mouth of the USB with the Connector cover! "
View detail
Thank you for all your help. This Hot grip has a
I always buy this roll-type Hot grip for winter only. In fact, it's a hassle to remove it, so I wear it all year round. But something is wrong. It breaks down. At that time, the good thing about DAYTONA is that they sell only specific parts like this product View detail
Fits: HONDA VFR1200F, HONDA VFR1200F, HONDA VFR1200F, HONDA VFR1200F
Necessary for Honda Grich
Attachment is required for the Honda Grip heater.
This VFR1200 can be installed in the NINJA1000.
I prepared the coupler because I branched the power supply from the position lamp.
It's been two years and so far it's working fine.
By the way, it's a Honda grich and a little low-throated, so it's been throttled.
View detail
It is very cumbersome to install.
I was thinking about which one of the heated grips to buy, and I bought a heated grip product from the same company as Odubai. In Korea, the price was too high, so I chose direct purchase. Professional installation skills? Without it, it is difficult to install even if you purchase it. Oh, and this is a harness kit and you have to purchase the grip separately. There is no separate installation manual attached, so it was difficult to find it through Googling. Actually, the day suddenly warmed up, so I didn't install it, but when I used the genuine heated grip in the Afreeca Twin, it was dramatically warm and not so. Still, it has the advantage of a clean design and good step-by-step display. And high-quality chrome bar endweights are included. We plan to install it again in the fall. Genuine Honda accessories are the answer for Honda bikes. I was worried about what kind of hot wire grip I would buy, and I bought a hot wire grip product from a company like Oh Dubai. I chose fastball because it was so expensive in Korea. Professional mounting capability? If it is not available, it is difficult to install even if purchased. Oh, and this is a harness kit and you should buy a grip separately. Since the installation manual is not attached, it is difficult to find through Googleing. Actually, the day suddenly warmed up, but it was not so dramatically warm when I used a genuine hot wire grip in the African twin. It has the advantage of neat design and step-by-step display. And it is enclosed with high grade chrome bar end weight. I am going to wear it again in autumn. The Honda Bikes are the right accessories for Honda. translated by Google Translator View detail