Reviews
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
It worked on my iPhone 15Pro.
[How is it used?
I was considering a Smartphone Holder to view Navigation on my BMW R100 Twin suspension.
Was the one you received as per Image?
It is easy to install and use, with One-touch to fix and remove the phone. It is intuitive and could be used without Stress.
Was the installation difficult?
Wiring around the Handlebar may be Large strange. The only thing to do is to wrap the included rubber parts around the handlebar, and then hook and fix it with a bracket.
I used DoctorRubber's Handlebar Grip Rubber as an anti-vibration measure. We recommend it as well!
https://www.webike.net/sd/25949395/
How was your experience with it?
It is easy to install and use, with One-touch to fix and remove the phone. It is intuitive and could be used without Stress.
To remove the phone, pull the red lever in front of the reverse side toward you.:Pair (for Left and Right) The claws of the "I" release.
[Included Parts:were they on?
All Included Parts:required for installation are provided.
View detail
Vibration Isolation Outclassing
A little soft, but firm and very good.
We will make it a good companion for future Touring.
View detail
Excellent workability
Best quality as Smartphone Holder. A product with no complaints in terms of retention, security, and workability. View detail
Large texture
Size-wise, it's like a Large tree, but I think Hold is a good idea.
Good for single cylinder motorcycle as I also added vibration protection.
View detail
Smartphone Holder is the best!
The fit is so good that you don't feel the anxiety of saying your phone is going to fall off. View detail
Easy to use
It is convenient to attach a phone with One-touch. View detail
It slips and moves.
Used to attach the Smartphone Holder to the Pipe behind the Screen on the Honda 400X (2019) (with an additional Spacer that comes with the Smartphone Holder).
The size itself is just right, but the hard rubber makes it slippery, and even when the bolt is tightly tightened, it slips and moves. Therefore, I wrapped a thin double-sided tape around the pipe on the body side before installing the bolt, but it is not completely fixed because the outer side of the bolt also slides.
I'm considering replacing the Arm of the Holder with an aluminum spacer only for the type that is tightened with ZETA Bolt.
View detail
KaEdia SafetyBand
The band was shredded after about a year of use. I thought it would be better to make the rubber a little thicker or a little softer. View detail
Higher height.
I bought this when the Autofocus on my previous iPhone 11Pro Camera broke.
Type VibrationControlDevice to be attached to existing Smartphone Holder3
Just Smartphone Holder3+ IH2100Rigid (25077) The pull-pull mechanism is about 20mm higher than that of the "M" and it shakes more when a smartphone is attached.
I think it can absorb a certain amount of vibration, but the increased height makes it look bad.
If I were to purchase an expensive SMARTMonitoretc. without a phone attached, I would be willing to purchase a used Android phone and use it with TetherRing.
View detail
KaEdia SafetyBand
I had to repurchase it because it shredded when I was stretching it to install my phone on a cold day.
It would be better if it were a little thicker.
View detail
Slightly unstable
From a friend when I got a new phone.
You should definitely get one because the Camera's Autofocus feature is so fragile!" I bought it after being advised to do so!
The stability is a little worse than before, so I'm a little worried.
It's better than worrying that the Camera might break.
I don't know how well it works yet, but I'm glad I bought it because it doesn't seem to have any problems!
View detail
Highest & High
The product was satisfactory for the Large change, as was the reputation. View detail
I'm glad I sold it.
While transferring DAYTONA's Smartphone Holder from MONKEY to ZZr, I accidentally lost this product that I purchased this time and was about to give up using the Smartphone Holder itself when I went to Webig to see if they sold Rose! I was about to give up using the Smartphone Holder itself when I went to Webig to see if they had any Rose products for sale. Thanks a lot. View detail
To fix your iPhone
Purchased to install on Handlebar
Large and well fixed just right.
View detail
Robust retention and mysterious unity
[How is it used?
Quantity of about 8 years and 80,000 km (YZF-R25, 10,000 km in half a year, the rest YZF-R6):2pc. Use Set
Installation:All of them are installed by building a base on the handlebar, R25 with Nisshin Mirror Holder, R6 with CF POSH Mirror Holder (https://www.webike.net/sd/1125900/) and YAMAHAOEM Parts (https://www.webike.net/sd/1125900/) with M10Ball (https://www.webike.net/sd/1125900/) and Short arm (https://www.webike.net/sd/1125900/). R6 is equipped with CF POSH Mirror Holder (https://www.webike.net/sd/21313052/) and YAMAHAOEM Parts (https://www.webike.net/sd/25729937/) with M10Ball (https://www.webike.net/sd/24021956/) and short arm (https://www.webike.net/sd/21313052/). Short arm ()
Equipment used
Xperia 5 I don't even remember because I have no records before and I wasn't really interested in smartphones.
1. Xperia 5 (docomo) approx. 2 years
2. Galaxy S21 (docomo) about 1 year
2-1.DriveMan BS-8 (https://www.webike.net/sd/23219567/) parallel operation
3. Xperia 5 iii (simFree) about 1 year
4. Pixel 7 Pro (simFree) approx. 1 year
Was the one you received as per Image?
Simple look and somewhat rough information as per Image
Was the installation difficult?
Once the ball of the base is fixed, Arm components can be tightened and loosened without the need for tools, making them easy to use.
However, the Handlebar is used with the smartphone attached to the Quantity:Pair (for Left and Right) It is necessary to check the interference with the Screen, etc. by cutting the screen in half, so it is necessary to check after attaching it.
How was your experience with it?
Even after fixing, some Quantity:Pair (for Left and Right) There is some play in the rotation of the wheel, but it did not rotate while running and did not cause any problems in use.
Although it is not known whether the Smartphone and Camera we used have optical image stabilization, we have never experienced any problems with the Camera.
I have never had a phone fall off without the rubber claws, though. It is just meant to be a precaution.
The rubber part alone can be replaced, and the color can be selected from three colors (https://www.webike.net/sd/24186773/), so the expense is modest when deterioration is somehow a concern. Adhesive also included.
Since it is clamped by four claws, it is necessary to pay attention to the position of the Button (dedicated to Camera of Xperia or Action of iPhone 15Pro) if it is located on the edge of the Smartphone. (I mean, even the Pixel7Pro with two buttons on the Right Side sometimes pressed them.
The size of the gold part of the OEM mounting base of the Driveman BS-8 (also 10) and the gold part of the center seal of this product when the seal is peeled off are brilliantly the same, and when the gold part is disassembled with appropriate double-sided tape and transplanted and attached, it becomes a much sturdier and more robust mounting base than the BS-8's optional Handlebar Mounting. The Mount base is much sturdier and more robust than the BS-8's optional Handlebar Mounting. (It is also possible to clamp it with a nail to further increase stability.
I think I gave up on Seal because its texture is similar to that of YAMAHA's tuning fork Sticker, and it looks similar but slightly different in Largeness.
[Included Parts:were they on?
No Instruction Manual or any other instruction manuals are included in the product images.
[Was there anything that disappointed you?
Nothing special. However, I would have been sad and run to SYGN HOUSE if I didn't know that it was made in the United States and used by the military, but that it was not so particular about the appearance of the product.
Originally, we had used a holder composed only of resin from Miknowla, but the time and effort required to attach and detach the Smartphone was far less. Also, the claim that it is also used by the military made me feel more secure on my motorbike, which has a lot of vibration.
I have never encountered any image stabilization problems, and would have continued to use this product if there were not more Buttons on the Smartphone side.
View detail
Fits: ROYAL ENFIELD Continental GT 650
With a sense of security.
Re-ARAI's is an authorized dealer of Royal Enfield West Tokyo, so we put it on before delivery.
I am not sure how to install it, but he said it was expensive because of the Top Bridge screws.
I'm not sure if it's something you can DIY yourself, but once you have it, this is the only way to go.
Separate handle, so normal installation is not possible.
I think you should call and ask before you buy.
I use the combination in the picture. Even if you don't use RamMount, KaEdia is a better choice.
Hold's sense of security.
View detail
Easy to take out
It can be easily removed when not needed.
This is a recommendation for those who want to make the Handlebar area reflective, as the Snap and the Holder type tends to look clunky even when the phone is not in use.
Touch controls are almost unresponsive with the Gloves on. I don't mind, though, because if I only register Navigation on my phone before driving, I hardly ever touch the screen.
View detail
It works fine
It was easy and fixed my phone with no problems. View detail
Smartphone Holder
I am very happy with the quality, it holds well, and it is inexpensive. View detail
Mounted on SRX
[How is it used?
For smartphones as Navigation for Touring.
Was the one you received as per Image?
Large swing from DAYTONABrand's Miknowla's.
How was your experience with it?
There is no space for mounting on the handlebar, so I use it horizontally by fixing it to the Stem Nut. I have no problem with charging with the TORQUEG06.
[Points to note]
Arm retention is solid, but the handlebar mounting and ArmBase are separate and there was a little rattling here, so I inserted a piece of sponge tape between them.
How did it compare to other products?
This is a replacement for the one from Miknowla, which is no longer available due to the smartphone's Large type, but it is a bit lumpy. It is a little bit tough, but I think that is why the fixation is so firm.
View detail