Reviews
Fits: HONDA Hornet 250
PROTEC SPI-H32 Shift Position Indicator Exclusive Kit [for HORNET250]
Comapre with other indicatores this is the best one with good built qulity.Very eazy to fix with plug and paly as a manual said.Rear wheel taco Signal will get with protec provided extarnal magnet sensor which is located in rear wheel brake drum(you have to run signal cabale from front to rear ).Those 4 magnet will fix fermaly without falling down.CDI taco signal will get from speedo meter wire loom using with Y connector which is supply by protec.Even mai unit inut 12v power suplly Y cable also provided(then eazy to connect) Accuracy with running condition it's really good & it will show up real current gear position while on road.even we can programe up to our rpm ratio. Main indicator bulit with sensor while you are in bright sunlight area brighness of indicator will bright up automatically.Additanally we will get 2nos of protec sticker along with this. I will recomended those who love Bike enthusiast View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Dissatisfied
I purchased this product to prevent Small scratches.
It floats from the edges, either because the size is not right or the adhesion is weak.
After pasting, Meter was difficult to see.
After a few Touring, I felt that Small scratches were better and removed them.
View detail
I will cancel the confirmation of the gold deposit because it has been too long.
Too late to confirm entry Gold (● Translated by ε´●) View detail
Used for JADE MC23
Quality and performance are the same as OEM products. Cost performance is also good. Manufacturer is a good choice for end-of-life vehicles. View detail
Not enough explanation.
I bought it thinking it could be used for SIDEMeter Bracket. The product is a type of front stay that wraps around a fork by bending the bracket, with almost no description or pictures. I was not interested in selling it as a product in the first place and could not find any descriptions or pictures.
There are many other good products that you can buy and lose money on if you Front stay with the product.
View detail
Genuine Eazi-Grip Meter Protector for MT07 2021
With this being a relatively new bike, the owner wanted to get some form of meter protection for in case this got any scratches. These meters are very expensive so anything you can do to protect them is good money well spent in my books. Finding the right one was super easy as I just checked Eazi-Grip website and then searched on Webike. The price is really good value for what these do. When you think about it, would you rather pay this small amouint now or a hefty amount when your meter gets scratched? Anyway, with a few other small parts for other bikes, I got them all shipped via EMS and the order arrived in 5 days and came in perfect condition. The meter protector also came taped to a piece of cardboard which Webike warehouse added to keep it nice and flat. Well thought of Webike. The packaging is minimal but the protectors look really neat. These do come with instructions if you have never fitted a meter protector and are easy to follow. Take your time and you will get a great result. Once fitted, you can barely see it anyway but you know you have something there to help. Nice purchase and very pleased witht he overall result. Thank you Webike. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
difficult (e.g. customer, guest, child)
If it can be applied well, it will look beautiful because of its good texture, etc., but it is quite difficult to apply.
Perhaps the first sheet is not very well applied, so Quantity one extra sheet in case that is the case.:I felt that it would have been better if it had been a Set.
By the way, they can be purchased in Single Item for failure.
The price is quite high, so those who can devise their own way may want to put up a 100-cent film that can be cut and used.
View detail
tw200
[How is it used?
Touring
Was the one you received as per Image?
yes
How was your experience with it?
good
[Points to note]
None
How did it compare to other products?
good
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA Hornet 250
For CB250F
Shift Position Indicator About quality and texture Good Product About shipping and packaging Good Packaging and fast shipping View detail
Magic tape is the worst.
It's battery powered, so there's no back light, but that's not a problem.
When it gets dark, you can't see it at all.
It is attached using the Magic tape method.
The quality of the double-sided tape of the Magic tape was not good enough and I had to put the Magic tape on and off several times.
Body and Magic tape started to peel off.
Glue left on Body and became sticky….
It's a very expensive product for an electric Tachometer.
What's wrong with Included Parts:being worse than it should be?
And even though it's battery-powered, there's no machining of the Magic tape on the battery part.
It's a shame that it's a DAYTONA product.
View detail
Thank you
I removed the OEMLight & Meter Bracket when doing the LightUp, so I used this Bracket. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
I put it on to prevent scratches on the Meter Lens.
[How is it used?
Purchased to prevent scratches before they occur as I am buying a new car.
Was the one you received as per Image?
The product was exactly what I expected.
How was your experience with it?
I think it is effective because it is not hard to see after it is applied and there is a certain amount of heat.
[Points to note]
The meter itself has a slight radius (curved surface), so it is best to apply it with care.
I was very careful, but I let Air hair ・・・・ I crushed the air bite, but it was a little hard to see, so I waited and made a mistake.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I would like to ask the manufacturer to include a small paper for removing oil and grease, as I know some people do not have one.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
the same as it was reputed to be
As per other reviewers, it's still difficult to put it up.
The Exclusive Design and Just Size are not tolerant of mistakes, and even if the center part of the main body can be managed, it is very difficult to put the thin and round surrounding parts in the right position.
Seat was thin and stretched when working with it... I was out of my depth.
View detail
Fits: TRIUMPH Scrambler 400 X, TRIUMPH Speed 400
A spare Film is also included for your peace of mind.
The size of the meter panel can be set to "Exactly" for easy operation. You can also have a spare quantity in case of failure.:It is safe because it comes in 1 pc. I have not been able to find the Meter panelProtection film anywhere else. View detail
Repair Parts was a great help!
I broke and obtained the already discontinued Square LCD Speedometer & Tachometer's Gold Genus Reactive Speed Sensor.
I am glad to hear that you are now safely posting speeds.
View detail
There is an initial defect
Brand reliability was also high, so there was an initial defect and it was Shock.
It is our fault, but unfortunately we are crying ourselves to sleep because we could not contact the company within the return period.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX750RR, SUZUKI GSX-R1100
M-TEC's Reprinted Parts
GSXR750 Oil Cooled Initial Model 1985s
OEMParts was discontinued and M-TEC re-released it with reissued Parts, so I bought it as StockParts. Thank you very much.
View detail
Fits: YAMAHA SR400, YAMAHA SR500
Freak’s PIT:Freak's Pit OriginalMeter Bracket Extra Thick
[How is it used?
I purchased the OEM Meter Bracket because I was concerned about the height when using the separate handle.
Was the one you received as per Image?
Yes.
Was the installation difficult?
The installation itself was not difficult.
How was your experience with it?
The meter was lowered, which made it look cool when the bike is mounted on the motorcycle or when viewed from the side!
[Included Parts:were they on?
A simple Instruction Manual is included, but the WhiteBlack color makes it rather difficult to read and does not provide detailed installation instructions.
[Was there anything that disappointed you?
Vibrations cause the Meter to turn round and round. (Gap.) This is the point where it ends up.
I put a transparent seal on the invisible position to prevent it from turning.
View detail
SP TAKEGAWA Meter Protection Film
About quality and texture - The product quality is great. About the feeling of use - Texture is sleek and smooth, almost feel like glass but its just a film. Difficulty of installation - Very easy install. I was very suprise when I installed the film because my meter display was full of scractches/swirls marks and after installation, I was shocked to findout that it literrally hides the scratch/swirl marks i had on my meter display. Just look at the images i provided, my meter looks brand new. View detail
KITACO Speed Pulse Conversion Unit (Installed on JC92 U.S. Spec.)
About quality and texture - Quality is ok. Difficulty of installation - Installation was easy. About shipping and packaging - Well packed and secured. Any concerns, cautions, or advice when purchasing - Only concern i had was getting to the setting mode and i couldn't get it to power up. On instruction manual the Optional Connector is actually what powers up the device to get to setting mode. My grom is purchased in the U.S. it may be different with the Japan spec. as i couldn't find the power supply connector harness on my bike. I was able to just tap the power supply through the rear lighting and got it to power up and set up to my bike specs. View detail