Reviews
Daytona usb 18w.Good
Type C usb.Bult qulity good.water proof.cable lenth inought for from head cowul to handle bar mount.good thing is out put port dust seal is replacibale.Main power supply cable along with mini barral fuse.Out pout usb c port is very tiny and simple mount with cable tie Unfotunatly my unit dosent work some time in idel rpm,I'm suspecting volatge detecting(even viltage above 12,4v )Any way im satisfied. Charging is good can be charge phone battery quickly. View detail
![SPI-H32 Shift Position Indicator Exclusive Kit [for HORNET250]](https://img.webike-cdn.net/catalogue/images/41170/protec001_TS.jpg)
Fits: HONDA Hornet 250
PROTEC SPI-H32 Shift Position Indicator Exclusive Kit [for HORNET250]
Comapre with other indicatores this is the best one with good built qulity.Very eazy to fix with plug and paly as a manual said.Rear wheel taco Signal will get with protec provided extarnal magnet sensor which is located in rear wheel brake drum(you have to run signal cabale from front to rear ).Those 4 magnet will fix fermaly without falling down.CDI taco signal will get from speedo meter wire loom using with Y connector which is supply by protec.Even mai unit inut 12v power suplly Y cable also provided(then eazy to connect) Accuracy with running condition it's really good & it will show up real current gear position while on road.even we can programe up to our rpm ratio. Main indicator bulit with sensor while you are in bright sunlight area brighness of indicator will bright up automatically.Additanally we will get 2nos of protec sticker along with this. I will recomended those who love Bike enthusiast View detail
It's not Kang Tan, right? LOL!
In the product name Kang Tan." but it is not such a kantan to be installed on ELIMINATOR 400.
I don't mean difficult, I mean tedious lol.
To begin with, the problem is on the body side, but the Tank has to be removed in order to install the 4-poleRelay.
This is a pain in the ass, lol.
The product itself is solid, and the Harness fits inside the MeterCowl, so it is a good reflection.
I think it will be around the Handlebar when the retrofit USB Socket is installed, so it will be easy to handle the Wiring! (,,> <,,)
As mentioned earlier, the product received a perfect score except for the 4-poleRelay installation.
View detail
Fits: YAMAHA SDR200, YAMAHA DT200WR, YAMAHA DT230, YAMAHA DT230 LANZA, YAMAHA BRONCO ST225, YAMAHA TT250R, YAMAHA TT250R RAID RAID, YAMAHA XT225 SEROW225, YAMAHA XT250 SEROW250, YAMAHA XT250X, YAMAHA R1-Z, YAMAHA TDR250, YAMAHA TZR250, YAMAHA XG250 XG250 TRICKER, YAMAHA VIRAGO250, YAMAHA FZR250, YAMAHA FZX250 FZX250 ZEAL, YAMAHA RZ250R, YAMAHA SRX400, YAMAHA FZR400
To match Lithium ion battery
The Lecti Fire a&Regulator I was using broke and could no longer charge the Lithium ion battery, so I replaced it with a suitable one.
We will not know until we use it with a lithium ion battery for a number of years to see if it is durable enough for the price, but the voltage is stable at about 14.5V after replacement.
View detail
![[Mr Quick] Taillight Garnish](https://img.webike-cdn.net/catalogue/images/132620/mr19-mo02-01_TS.jpg)
Easy to customize
Double-sided tape is all that is needed, so anyone can easily attach it.
The price is cheap, so I bought it thinking it would be okay if it failed, but it feels and looks great!
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Dissatisfied
I purchased this product to prevent Small scratches.
It floats from the edges, either because the size is not right or the adhesion is weak.
After pasting, Meter was difficult to see.
After a few Touring, I felt that Small scratches were better and removed them.
View detail
The classic European Blinker
This is a replacement for an OEM Blinker. I am satisfied with the stylish look. View detail
![Mini4 Digital Air-Fuel Ratio Meter [Narrow Band Type]](https://img.webike-cdn.net/catalogue/images/53629/KS-M4-AFN_01_TS.jpg)
I will cancel the confirmation of the gold deposit because it has been too long.
Too late to confirm entry Gold (● Translated by ε´●) View detail
I'm just pimping...
[How is it used? Town ride
Was the one you received as per Image? It was a little different.
Was the installation difficult? Simply replace the Connector and you're done!
How was your experience with it? The light went from a light bulb color to a white light color like a White color fluorescent lamp, and the light was confirmed to be lit well even in daylight.
[Included Parts:were they on? Two Tie Wraps in Black for outdoor use
[Was there anything that disappointed you? Quantity of claws to fit into the insertion slots.:Pair (for Left and Right) Wiring is oriented in the same direction, so depending on the direction, the wiring is short and may interfere with the cowl, so care must be taken when routing the wiring.
Replacement of ▼Lamp requires removal of the exterior of the car body, No.2 long and short +Driver, M10φ? SocketLunch.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
I changed the look to a more modern look.
After 9 years of purchase, I changed the Blinker from Orange bulb to LED + Clear cover to match the LED + Clear cover of the Tail lamp. The price is a bit expensive at 10,000 yen, but it comes with Relay, so I guess that's about the same.
when Blinker is not attached. [Color] Clear is clean and Refreshing and I am satisfied with the aim.
ZX14R is very troublesome because the cowl has to be removed from both Front and Rear to replace the blinker valve, but I am used to this after installing other parts many times, so I can forgive it. (Plug replacement is the real work from here, and it is a very large change.)
It might be a bit challenging for someone removing Cowl for the first time?
It was worth the effort to replace it.
View detail
The quality of the product seems good.
We chose this product for the purpose of dress-up because the OEM headlight is a little dark.
Considering the power consumption, we used LEDs from Sphere Light instead of Halogen bulbs from Included Parts to improve the appearance and brightness.
As for installation, I think it would be easy if you read the Instruction Manual carefully.
However, the optical axis adjustment is Quantity:Pair (for Left and Right) The LED bulbs can be adjusted in terms of brightness, so it is now possible to upgrade the level from the OEM product.
I think it is possible for those who are considering purchasing this product since it was not chosen for the old corporate style but for the purpose of increasing brightness.
Please note that this is a personal opinion and should be used only as a reference.
View detail
It is a good item
Used for SUPER CUB 90 which was converted to Battery reply.
When waiting at a traffic light at an intersection, the blinker stops blinking when the headlight is turned on and the brake is applied,
Switching to this product helps because the Blinker blinks properly.
Simply remove the Tail lens and replace the Valve.
It is brighter than the Normal valve and eliminates Valve breakage, so there is one less cause for concern.
View detail
Empty Fork
Simple and effective equipment. An extension with mounted terminals, a bolt, instructions for use. This will be perfect for cleaning the fork. View detail
Used for JADE MC23
Quality and performance are the same as OEM products. Cost performance is also good. Manufacturer is a good choice for end-of-life vehicles. View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI W800, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ, KAWASAKI W650, KAWASAKI W400
Great quality but
Products to buy together You can just use some electrical tape wrapping the rod, but little lose on Doremi LED blinkers. View detail
Not enough explanation.
I bought it thinking it could be used for SIDEMeter Bracket. The product is a type of front stay that wraps around a fork by bending the bracket, with almost no description or pictures. I was not interested in selling it as a product in the first place and could not find any descriptions or pictures.
There are many other good products that you can buy and lose money on if you Front stay with the product.
View detail
Genuine Eazi-Grip Meter Protector for MT07 2021
With this being a relatively new bike, the owner wanted to get some form of meter protection for in case this got any scratches. These meters are very expensive so anything you can do to protect them is good money well spent in my books. Finding the right one was super easy as I just checked Eazi-Grip website and then searched on Webike. The price is really good value for what these do. When you think about it, would you rather pay this small amouint now or a hefty amount when your meter gets scratched? Anyway, with a few other small parts for other bikes, I got them all shipped via EMS and the order arrived in 5 days and came in perfect condition. The meter protector also came taped to a piece of cardboard which Webike warehouse added to keep it nice and flat. Well thought of Webike. The packaging is minimal but the protectors look really neat. These do come with instructions if you have never fitted a meter protector and are easy to follow. Take your time and you will get a great result. Once fitted, you can barely see it anyway but you know you have something there to help. Nice purchase and very pleased witht he overall result. Thank you Webike. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
difficult (e.g. customer, guest, child)
If it can be applied well, it will look beautiful because of its good texture, etc., but it is quite difficult to apply.
Perhaps the first sheet is not very well applied, so Quantity one extra sheet in case that is the case.:I felt that it would have been better if it had been a Set.
By the way, they can be purchased in Single Item for failure.
The price is quite high, so those who can devise their own way may want to put up a 100-cent film that can be cut and used.
View detail
Fits: HONDA DAX125, HONDA MONKEY125
Is it essential in modern times?
Good product
When you live a life where your phone is indispensable, battery is always a concern.
The USB port gives me a sense of security.
If you read the Instruction Manual carefully, I think it is gentle as a work S-Kill.
However, it is necessary to pay attention to the removal and installation of the light cover (plating parts) and the fit of the wiring.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
To remove ACC power from VST250SX...
I used it on a DL1000 V-STROM250SX to take out the ACC power for the DRA RECORDER.
I'm sure it will be listed eventually, but DL1000 V-STROM250SX is not listed as a compatible car model, but it was usable.
It would be nice to be able to get ACC power just by inserting it between the Connectors without damaging the existing Wiring.
View detail