Reviews
It's not just a board.
The image doesn't show much, but it is quite thick, which explains the price.
It is hard to imagine with a Single Item, but when installed, it is a Match.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
I'm glad I bought it!
I wasn't sure whether to buy it, but, I'm glad I did! ♪ (??????) ♪ View detail
Cool
This is Cool, although I honestly don't know how effective it is.
Red is good.Color:Red is unexpectedly suitable for Gray Motorcycle.
View detail
Fits: HONDA CB1100, HONDA X4, HONDA LD 97-03, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
Posh sprocket cover
The cover was delivered very well packaged,after unpacking it you could tell it was well made and good quality,fitting this item took 45mins from start to finish and it looks great View detail
It's good.
The effect is... I honestly don't know.
Atmosphere. www.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Over Sprocket Cover
I love it because it comes with Design and Change Accent.
I think it is less expensive than other Manufacturers
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Divert to other cars
Sprocket cover on Z1000
Actually, the 900RS version is on its way.
I don't see it in the lineup for Z1000 because of its unpopularity.
The Z900 is based on the Z1000 Engine.
The Z900RS, which is based on the Z900, would have the same dimensions.
In other words, the Crankcase should be the same for Z1000, Z900 and Z900RS!
And when I tried to match it, I found that it was EXACTLY!
You did it!
Tightening was Torque managed using Torque wrench to no avail.
As for functionality, the Sprocket cover has a Shift holder, which might improve the Shift feeling.
And when I put it on, Wiring, which was hidden by OEMCover, was fully exposed, so I hid Wiring with Tube.
It's hard to see on the STAND side and nobody sees it, but it's self-satisfying.
This part of the hobby thing is the Large thing, isn't it?
It's a functional Part, but when you clean the Chain.
I like the fact that the FrontSprocket part, which was covered and couldn't be flushed with cleaning agent, can now be flushed directly.
Z1000 BaseEngine is ZX9R
In other words, the Sprocket cover for 9R should be able to be installed.
It's nice to be able to divert from a popular car model.
View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125, HONDA GROM
Accuracy!
The cutting accuracy of the parts is high, and bolt tightening is also excellent.
The Driven Sprocket of the GROM has little clearance with other parts, so it is necessary to work carefully so that the wounds do not stick to both the body and the parts.
Although we have not yet been able to verify the shift feel, we have seen an improvement in the firmness of the feel.
View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA APE 50, HONDA APE 100
DriveSprocket Replacement
This is a replacement for Gasket that I had purchased some time ago to replace it with a new one for DriveSprocket replacement.
The price seems to be much higher than the HondaOEM Product, and since there seems to be no price difference between the HondaOEM Product and the HondaOEM Product, I wonder if the HondaOEM Product is acceptable next time.
View detail
To prevent mud clogging
I bought the Chain after seeing someone with a Chain that was stuck in the mud and disconnected.
I think people who often rush into mud as well as Dress-up should purchase this product.
View detail
Change in appearance.
It is a self-satisfied part with no functional significance. View detail
Sketchy Nude
The Driven Sprocket is skewed through the gap, and you can also see the Gold chain, which gives it a very nice appearance. View detail
It gives a sense of custom.
The OEM cover is silver, and the Pivot is silver as well, so replacing it with this black anodized product will give it a customized look.
The SUPER CUB's Chain Guard is just stuck in the pin and comes right off, but the CT110 HUNTER CUB has the tip of the pin melted and crushed, so you have to shave the pin a little to remove it.
It is easier to work with the Change Pedal and Pivot Cover removed as well.
As a side note, when I removed the OEMOption Change Pedal, I found that the screw threads on the fixed bolt were stupid.
View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125, HONDA GROM
It's so good ??
I replaced the G-Class Firmly, and it has improved the Mission entry to an unbelievable degree. View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125, HONDA GROM
No matter how you install it ….
The texture as a Sprocket cover is very good.
However, there is a problem with the shift holder part (I don't know if it is an individual difference of the car body or a product problem), the bearing is not at the center of the shaft and the shift pedal does not move smoothly.
When actually driving the car, it would often not go from 2nd to 3rd gear. After removing it, I was able to drive without any problems.
I am very disappointed because I have bought many Over products and have been satisfied with the quality and feel of the products.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11
The FrontSprocketッs easier to clean and has a better texture.
Cleaning around the front sprocket is easier and always cleanable.
Texture and Cost performance are good.
View detail
Fits: KAWASAKI ZEPHYR750
Fitted to match RearWheel inch up
Originally, we were thinking of TireInch Up and 520Conversion by replacing the Wheel, so we replaced the Sprocket Cover.
It is very light compared to the OEM SPA ROCKETCover.
In addition, unlike the Covers of other manufacturers, ZEPHYR's long Shift rod is stable and the Shift operation feels good because of the Shift Support.
The appearance is also very refreshing around the Cover and the body looks tighter.
As for the cost, the cover, bolt, etc. are all made by Anodized, so they are very expensive. However, considering the lightness, sturdiness, and effectiveness of Shift Support, it is worth considering.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125
This is a great sprocket.
When replacing the small gear, I replaced it with a titanium bolt. The titanium bolt was not visible in the original cover, so I searched for several products. Among the sprocket covers, I chose this product because it made almost the entire small gear visible. I am very satisfied after trying it out myself. -------------------------------------------------- -------- We replaced it with a titanium bolt while replacing the small gear. The genuine cover was not visible, so I looked for several products, and I chose because this product could make it look almost all of the whole gear during the Sprokit cover. I'm so satisfied with it. Powered by Google Translator View detail
Engraved Shift does not match the 10-13 model
[How is it used? I replaced it in conjunction with the introduction of the company's Light clutch kit.
Was the installation difficult? All I had to do was remove and replace the OEM, but it took me about 3 hours (including cleanup) to clean the accumulated ChainGrease dirt and polish the parts exposed by removing the OEM resin cover, as well as to replace the light clutch kit.
How was your experience with it? It is the self-satisfaction of Dress-up.
[Included Parts:were they on? Gasket and other necessary parts are included.
[Was there anything that disappointed you? I'm considering filling it with Bolt.
[Notes] In the product description of this site, the car model is -13, but on the Manufacturer's website, the car model is for 14 years or later. This is because Shift up to 6-speed is stamped on the product (according to the answer we received from the manufacturer). We have a 2010 model (5-speed), so I would like to hide the 6-speed indication by masking, etc. when the car is inspected. The installation itself was Large sturdy even after -13 years.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
It is easy to install.
I'm not sure about the color!
The texture of the product and such is very good.
However, if the front sprocket is not OEM, the sound might be bothersome.
View detail