Reviews
You don't have to, but it's definitely cooler if you do.
This is a plate to cover the notch for the indicator on Harley's OEM Meter Bracket. The quality of 31State's powder coat is very bad, some shop wrote, but it was applied beautifully. I'm not sure what to do.
A must-have for the detail-oriented man.
View detail
machining
First of all, I shaved the Seat Inner and Fitting, the inside corner and Rivet hole, and installed the Tail Lamp. The position of the Nut of the Tail Lamp is gapped and it is close to One Side. I cut the rubber bush and tightened it with M10mm Washer so that the light can go into the back. It took 7 months from the product order to the product arrival. View detail
Fits: YAMAHA Jog Aprio Type 2, YAMAHA Jog Aprio Type 2, YAMAHA Jog Aprio Type 2, YAMAHA Jog Z, YAMAHA jog, SUZUKI sepia, YAMAHA Super Jog ZR, YAMAHA VOX Deluxe, SUZUKI Address V100, SUZUKI ZZ, HONDA Smart Dio, HONDA Zoomer, YAMAHA mint, YAMAHA box, HONDA PCX125, HONDA PCX150, HONDA CREA SCOOPY, HONDA JULIO, HONDA JOKER Helmet, HONDA JOKER90
Fishing Motorcycle Completed!
Just plug in the ROD and fix it and it's a piece of cake... more times to go fishing! View detail
Stylish
It can be installed on the instrument panel, center console and door lining. It is the best custom parts to dress-up your car. View detail
It's not bad, but the cosmetic?
It is the same color as the Front Axle Slider and the balance can be taken, and it is not bad, but I think the price is high. If it is half price at least, I think it is a bargain.
Is the Material penalized, or is it just enough to Cover you if you have a light standing gouge?
I don't think it's a replacement for Slider.
Well, Slider will be replaced if it falls, too, but it is Style outstanding compared with Rubber cover of NORMAL.
Installation is very easy, just remove the NORMALRubber cover, pull out the Split Pin, put it on and insert the Pin.
View detail
Carbon parts likes Large.
It is just Carbon parts, but it looks sporty at once.
This is definitely better than the OEM Cover.
View detail
I wanted to carbonize the Injection cover.
I wanted to change my Injection cover to Carbon so I bought this product.
Material:It's a Carbon product so there is some Gap but it's acceptable.
I am satisfied because it is a part of the person who sees it though it is not conspicuous.
View detail
with good looks
Whenever I adjust the chain, I change the split pin for the Axle Nut to prevent it from falling off, but the home center in my neighborhood only has StainlessSplitPins, and I always get frustrated because I can't bend them cleanly. I bought this product without hesitation after learning about its existence just as I thought it would be good without a cover.
As for the device, it just fits and sticks the Split Pin, but because it was unexpectedly hard, I attached it while lightly beating it with the plastic hammer.
It looks better and seems to be more functional, but I'm a little worried about whether I can remove the Cover without scratching it.
At any rate, the dress-up effect is Aria-like because of its high quality and good appearance.
View detail
It's not half as luxurious as it sounds!
The cap is well machined so the Snap pin is a little tight but it stays in place. It's a lot more expensive than the OEM Rubber cover. This is a great product.
Material:I think PlasticCap can be expected to serve as a slider in case of a fall.
However, I think this price is still too high just for the Cap and Snap pin.
View detail
Parenthesis good&Refreshing
I used it after adjusting the Z900rsChain, no split pin needed, and the OEM BlackRubber cover looks cool. I recommend it. View detail
This is exactly the Parts I wanted.
The Z900RS must prepare the split pin when adjusting the chain.
I was looking for a Beta pin that is both fashionable and easy to maintain, and this is exactly what I bought it for.
I'm very happy with the accuracy of the NutCover, and the Pin is not a waste of time.
I dare to say that the drawback is that the price is too high and the end surface of the Pin is poorly finished and does not slide in comfortably as it is.:It's Stainless Steel, but the color is not good, so I polished the edge surface to be smooth, and the PinBody is also polished to Polished (although you can hardly see it)
I feel the mark printed on the cap is noisy personally, but it is bearable. However, because the position of the hole and the print are not matched, when you want to adjust the position of the mark, you need to adjust the position of the Axle Shaft.
It takes a certain amount of effort to pull out the pin, so I think it won't come off while driving or get tricked on the road, but I fixed the wire with insurance.
View detail
Rod Holder done right
I love this product it’s really strong, well made, fully adjustable and easy to install. This little fishermen’s best friend even doubles as a flag holder too! Makes putting around the lake or along the river fun and adventurous getting your gear there safely quickly ready to cast at a moments notice. View detail
Fit is outstanding
The fit feeling is outstanding and it fits beautifully! I bought it because I wanted to
I had a hard time with the Plating product, but I thought I'd end up with a Uite even if I put something shiny here Material:Carbon Style
I'm a little dissatisfied with the texture, but considering the price, I'm happy with it
I'm glad I bought it
View detail
Fits: DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 959Panigale, DUCATI 959Panigale
It looks red, but the formation of the cross section is more - - -.
Used for 1299S. I wanted to unify at Tank Pad 's Manufacturer so purchase.
Carbon is quite thick and it seems to be protecting firmly.
It shines in DucatiRed.
However, as for the section of Carbon, although the surface polishing is done, it is conspicuous by thickness as it is as it is.
I wanted you to be careful so far as I will price so much.
Another person also pointed out, but since it is fixed with Seal material, I am worried about peeling off it.
0 pay closed.
View detail
Feeling tightened with a look up
For installation is It is mountable to the bolt. is. The position of Bolt was never Gap and it was able to be installed without problems. I made it to Twill Weave Carbon, but it looks nice as well. However, a little texture with Twill Weave Carbon of Side coverUnder - Although it may look different, I feel a sense of incompatibility, but I think that it can be exchanged because it is a few part after 2014 MODEL. View detail
It is quite conspicuous
When porting R1Clutch cover to FZ1 Fazer, we purchased this item because there is no face White in OEM Parts Number.
Clutch Wire leaves from the top and goes into Frame It does not attach to OEMCover of FZ1, it is for Type where Clutch Wire comes out from under R1.
Small I thought that it was an inconspicuous part, but I bought it, but it has quite a presence.
Installation is BoltQuantity : Easy with only 2pc, if you keep the basic Torque (Since the bottom is Alie's Die-casting, I think that if you tighten it all you can easily screw up the Screw hole)
Making is also beautiful and very satisfied.
However, although it was possible to personally as a result that it became conspicuous beyond imagination, I thought that people who do not like it would not like it.
The price is also slightly higher ...
Regarding functional performance, is rainy day or something effective? ... It is totally unknown.
View detail
Billet parts are roman
It is the installation to 2007 type R1.
I thought of purchasing for Dress-up.
The notation here corresponds to 09 - 10, but as long as you check ProductNo at Manufacturer 's Site, you can see that it corresponds to R1 in 2007.
Mounting is only to exchange OEM Parts. Since the attached Screw was shorter than the one of OEM, I used the OEM person.
I selected Silver according to Slider 's Base color out of 5 color' s colors It is a nice feeling.
Prices are somewhat higher so we recommend purchasing with Point.
View detail
Don't get this. It looks horrible. It is just a piece of curved, polished, metal and a few screws. It looks cheap and does not suit the rest of the engine. Buy the PLOT part instead.
Don't get this. It looks horrible. It is just a piece of curved, polished, metal and a few screws. It looks cheap and does not suit the rest of the engine. Buy the PLOT part instead. View detail
This is chrome rather than stainless. Heavier gauge steel than expected, fittings are just ok, but looks fantastic when fitted.
This is chrome rather than stainless. Heavier gauge steel than expected, fittings are just ok, but looks fantastic when fitted. View detail
[Webike Monitor] Following on the Fender, it is purchase. Truly, structure is beautiful and satisfactory. Since it is small, although it may be a Parts of appearance, a feeling of existence is rather than a weight saving. (Kana with a hig
[Webike Monitor] Following on the
Fender, it is purchase.
Truly, structure is beautiful and satisfactory.
Since it is small, although it may be a Parts of appearance, a feeling of existence is rather than a weight saving.
(Kana with a high price)
View detail