Reviews
Fits: SUZUKI GSX-R125, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT, SUZUKI SKYWAVE250 burgman, SUZUKI BURGMAN200, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
Fashion starts at your feet
Rim sticker will be attached!
This is not practicality, but a complete dress-up (laugh).
[Before pasting to …
Select the color of the MotorcycleRim sticker.
When I thought about what color Rim sticker to use, here is what I came up with 。
。 If the color next to the Motorcycle color is the Rim Sticker color, it will give a coherent and soft impression.
*Similar colors are the use of two/three adjacent colors in a hue ring.
●●* Use complementary color schemes to create Impact.
If you use a color that is opposite to the Motorcycle color, Contrast will be stronger and the impression will be more Impactful.
*Complementary colors are the opposite colors of the hue ring.
●*Using a three-color scheme, the product is both colorful and impactful. 。 If you use Motorcycle's colors and two colors that form equilateral triangles, you can create an Impact combination with three colors.
* A three-color scheme is a three-color version of a captive color scheme.
White and black go with everything.
All colors are white when lightness is increased and black when lightness is decreased. 。 In other words, unsaturated White and Black go with any color.
Same color as the player you admire 。 My lucky color etc.
→As for the color, since the Wheel is Black, I chose Red based on the principle of a three-color scheme.
(2) Check the Rim width.
Measure the width of your Motorcycle Rim and choose the largest size that can be stretched to that width. If the width is thicker, the impression of the area is stronger, so it does not bother you. Is distortion bothering you only at first? It depends on your personality, but the distortion of Rim sticker will bother you only for a while after you put it on. 。 It will not be a concern soon.
When a narrow rim sticker is used, it becomes a double circle with the Wheel outline. 。 This causes noticeable distortion of Sticker.
MotorcycleRim sticker tensioning instructions
[WATERING] The way is Commendation,
● Separate 1 pc at a time. The goods are thus Quantity:Several pieces on a 1 pc. mount. 。 This is then separated by 1 pc so that Sticker is unaware of it. 。 This way, 1 pc is easy to handle and easy to put up. 。 No damage to other Stickers during application 。 It is tedious, but there is no way to put them up neatly without putting them up one at a time.
↓
●Wash the Wheel to beautify. Wash and degrease the wheel, as residual oil will make it easier to peel off.
↓
● Dilute kitchen detergent and place in 100 Spray.
↓
The water is applied to the rim. After spraying soapy water, place the Sticker on the Rim 。 While wet with soapy water, fine adjustment is possible, so position it and once it is fixed, wipe the top with Towel or similar to remove water and fix it in place. 。
[Hang of the tensioning method].
Float the front and rear wheels…If you don't float the Wheel and put it up, it will be troublesome! It is easy to put up the wheel by floating the wheel with Center Stand or Motorcycle Stand. 。 If the rear wheel cannot be lifted, move the Motorcycle a little at a time, or turn the Wheel by tilting it toward the Side Stand. 。 Even a simple STAND is useful enough for ChainMaintenance, etc. 。 It is convenient to have one.
good point
● It will look really cool!
The durability of the parts can be expected since they are SEA BASSOEMOption Parts.
Easy to apply as it comes with a backing paper.
important point
Water tension is less likely to fail.
Degreasing is a must.
Do not do it all at once, but check the position of the seal and slowly remove air bubbles between the seal and the car body.
Of course, the Shop will do it for you, and there may be fewer failures (some Shops are not good at this). (Some shops seem to be bad at it.) However, it is possible.
You can think of your own color and put it on by yourself… It will also increase your love for your car.
View detail
Good quality
I bought it because I had accumulated a lot of Points. I did the groundwork and attached it to the Rear box. The size is just right. I don't know how durable it is yet. View detail
Amazing
Another great product! Extremly happy with the 1100four badges and quick international freight, I'll be buying a few more great parts in the near future, Thank you kindly :) View detail
Motorcycle, of course, was used to Remake an old NotebookPC!
Material on the Tank of my beloved Ninja 250SL:I wanted to put a Carbon Style Line sticker on it, and also used it to remake my NotebookPC, which had become shabby after a lot of use. The result is very cool! Of course, you have to degrease it properly! No problems with wetting it or touching it and it doesn't peel off! View detail
Sticker tuning
It is good because it is attached to Striker parts. View detail
Sticker
I bought a Sticker to put on my Helmet, Parenthesis good ?? View detail
AKRAPOVIC's MonotoneVERSION
Motivation
I purchased this product because AKRAPOVIC's OEM RedSticker seemed too good for Monotone's Motorcycle.
Was the one you received as per Image?
The size is slightly smaller than the OEM size.
[About how to paste...
Ex-Sticker removal (was not reusable)
Treatment after peeling off (Beauty for the treatment of adhesive residue due to its strong adhesive)
Selection of the position for pasting
Removal of oil (with a neutral detergent for Beauty)
How did it compare to other products?
We were also interested in the horizontal VERSION.
[Others]
Three-dimensional Emblem would be cooler...
If the gray areas are painted with luminescent paint, the scorpion mark will stand out.
I think it is a cosmetic product because I was able to make it over with a small budget considering the price.
View detail
Fits: SUZUKI GSX250R, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Something ….
I'm sorry, but this is the price for this.
It is so plain that even I forget that I put it up.
I only notice it when I put Gasoline in.
View detail
To one point!
I put it on the Front Fender because I installed Marshall's Headlight.
Quality and weather resistance also seem to be good.
View detail
The color match is narrow, but it’s okay.
It is not difficult to attach, but you need to be careful about the location when attaching. Since it is generally thick, the fork cover's role is also high. And it's cool View detail
I wanted to know about Size before I bought it.
CE47ADDRESS110 is neither DOHC nor 4Valve, but SEA BASS GlobalSite says that OilDrain hall is same as GSX-R. I also heard that Engine is Long stroke and ManufacturerOEMHigh CamshaftSpec. I also heard that the engine is long stroke and ManufacturerOEMHigh CamshaftSpec. I bought this car thinking that I can call it GSX-R. However, the side cowl of my Address is slightly short of space and there is no other space to put it. I am having trouble finding a place to put it because my car is a Honda, so it would not be stylish and I have no place to put it. I inquired about the size before I bought it, but they didn't tell me. They should have measured it for me since they had it in stock. Webig is very unfriendly.
I will write Size for future buyers. The largest size is 215mm wide and 85mm high.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900)
Sticker for MileMeter
It is easy to read even if you put it on the Mile display Meter. View detail
MORIWAKIEngineerRing Sticker
Texture is good, a little bit of air is in, but it will come out in a few days. View detail
Front Fender Side Decal ZETA Racing
The size is too large to put on KX85Front Fender. View detail
DIRTFREAK DirtFreak:IconSticker
StickerTune on Rear Fender View detail
Ninja Logo Sticker Kit
I'm wondering where to put it. lol I'm sure Sticker itself is fine since it is a Kawasaki OEM Product. View detail
Just a good Size
I replaced Cowl with Chinese Cowl, but there was no Honda Logo, so I bought one.
The size is just Exactly and I am very happy with it.
When applying in winter, warming it up with Dryer will improve adhesion and make it easier to remove the protective Seat from the surface.
View detail
It was just the right size.
It is a stable OEM clipping Sticker.
Easy and clean application.
View detail
Unique in my country
Its nice that the shipment includes 2 stickers. Really completes the look i was going for. Sticks good, but you have to degrease very well View detail
Completes the look
It had a nice metallic sheen to it. The sticker is easily applied to my windscreen We will see if the quality stays good in the hot sun View detail