Reviews
Boots Friction Prevention
I am very satisfied with the design and the ease of installation. View detail
The durability of Band's Rubber is poor
After 2 months, the band's rubber corroded and snapped off as shown in the picture.
I had no choice but to fasten it with coated needle gold.
View detail
O-ring is Garbage
I thought I read that TENERE fit up to 23, but I bought it.
No problems with installation, no interference with brake pedal etc.
There is no particular change in operability, but it seems to be easier to apply the ankle area to the vehicle body.
The other thing I would like to see is the appearance and the ability to put a lid on the Pivot shaft mounting.
There is nothing wrong with the accuracy of the product itself, but the weatherproofing of the O-ring that comes with it is very weak! I don't think it will last more than 2 months.
It is possible to substitute the O-ring fixing part with Tie Wrap. However, I would not use this material because it does not look good.:I have replaced it with a SiliconO-ring and am using it. So far there has been no deterioration.
View detail
Frame protection and improved gripping
Off-road motorcycles tend to peel off the paint on the frame when riding in Boots, because the frame is inevitably caught between the legs when standing.
From the viewpoint of preventing paint from peeling off and rusting, it is recommended to install frame guards.
Installation is easy because it is only fastened with a washer (sturdy rubber), but side covers and sprocket covers cannot be installed properly unless they are removed, even if it is a pain in the ass. It is a bit of a hassle, but it would be better to remove the Cover before installation.
View detail
Can not be installed
To install, a screw-in StraightSocket covered by a Rubber Bush is inserted into the hollow hole in the Pivot shaft of the Swing Arm, but the K7 uses a Quantity:Pair (for Left and Right) The Brake Side (Right) is too small and cannot be installed because the attached parts are of the same size. In addition, it is thought that a new car can be installed, but in the case of my car with rust and dirt adhering to it, the Shift Side (Left), which is thought to be the same size, could not be inserted either.
Although it can be machined and installed, it is recommended to use another Manufacturer's
View detail
Fast shipping to USA. Excellent tracking of order.
OEM product, fast shipping, excellent order tracking, good prices given the current US Dollar to Yen exchange rate. All good here! View detail
Genuine Polisport Frame Protectors for CRF250R
As this bike does take a lot of stick when it comes to being ridden in bad conditions, the purpose here was to get some better frame protectors. I have personally never used Polisport before but the customer specifically asked for this brand. Finding the part was not difficult at all as Polisport search function is really simple to use and you are greeted with what ever part is needed. The price from Webike was good value as they were actually in a sale at the time of ordering. I do have always some other parts to order so got them all shipped together via EMS. My order arrived very well packaged and 100% perfect condition. The frame porectors themselves a re a nifty piece of work. They are really a really tough rigid plastic composite but have a small amount of bend which makes this easy to fit. The finish and quality of these frame protectors is excellent as far as I can tell. They have a smoothed out matt look which works very well with the bike colour scheme. They attach pretty easily with the cable ties already included. If you wanted to go more permanent you could bond them on but cable ties for if you ever need to change them. Very pleased with this purchase and will look at Polisport in the future for other bikes if needed. Thanks Webike. View detail
Simple but good performance
It looks good, but the grip is good, so there is no burden when standing due to the grip of the boots and chassis. Installation is very simple and I think it's good because it prevents scratches.About quality and texture View detail
When the Center Stand is installed, a little effort is required.
The Instruction Manual indicates that the cover under the tank must be removed for installation, but it can be installed without removing the cover.
On the Left Side, the lower claw is first fitted and then fastened with two bands (Large and Small).
The Left bottom of the Right Side Cover interferes with the Center Stand, so it must be trimmed, including the claws.
I think you should cut at the base of Radio pliers and Cutter to Beauty!
Then fasten with Largex2 Band
Bundling Electrical Cord Covers Next Needle Gold Makes Banding Easier
View detail
When the Center Stand is installed, a little effort is required.
The Instruction Manual indicates that the cover under the tank must be removed for installation, but it can be installed without removing the cover.
On the Left Side, the lower claw is first fitted and then fastened with two bands (Large and Small).
The Left bottom of the Right Side Cover interferes with the Center Stand, so it must be trimmed, including the claws.
I think you should cut at the base of Radio pliers and Cutter to Beauty!
Then fasten with Largex2 Band
Bundling Electrical Cord Covers Next Needle Gold Makes Banding Easier
View detail
Effective against heat
Purchased for heat protection.
Material:I thought it would not be a perfect Fit since it is a Carbon product, but it is perfect except for the footpeg area.
It also blocks heat and is comfortable in the summer.
View detail
good-looking
It sticks tight like OEM. The ankle grips are good and easy to stand on. The ORing for the fixation may break someday, but it can be fastened with a bundle of wires, and the mechanics at the motorcycle shop liked it. View detail
Fitting is perfect.
Fitting is perfect as it is an OEM Product.
Insulation is, well, better than nothing.
As someone else commented, it would have been a perfect score if the main frame and cowl could be covered to the point where they overlap.
View detail
Wow that's cool
[How is it used?
Dress-up
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Safe in the event of a fall
[Included Parts:were they on?
(after the -te form of a verb) not ..
[Was there anything that disappointed you?
(after the -te form of a verb) not ..
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Carbon lovers will love it!
[How is it used?
When I bought a used WR250R, the lineup was abundant, so when my budget allowed, I bought a hanghang and a Z-CARBON, which has recently seen a sharp decline in the number of models available.
Especially for WR250R, the OEMOption Heel Guard was poor and difficult to use, so I remember purchasing this light and strong product in the early stages after purchasing the vehicle, coupled with its good parenthesis in appearance.
Was the one you received as per Image?
It was common in those days. "Carbon Style" Although Wet is not a product of the Carbon for goodness sake." It is a product and the texture is solid and as per Image which I am glad I purchased.
Was the installation difficult?
Quantity:Pair (for Left and Right) The Brake Side is a little tricky, but it is not so difficult that even beginners can install it if they take their time.
How was your experience with it?
In terms of functionality Wound protection from bouncing rocks and riding bootsetc. As I said, even a poor rider like me (a middle-aged eternal beginner who will never improve) has been working hard and not putting up roots.
The functional part of the Large thing. Cool above all!" It is a dream come true for the generation of old men who love CarbonMaterialLarge and can easily dress-up their hair.
[Included Parts:were they on?
Quantity of this product:Pair (for Left and Right) 1Quantity:Set and two Z-CARBON decals, plus UrethaneTape are included.
[Was there anything that disappointed you?
I heard that the screw hole had some gap when my friend installed it, but the product I purchased could be easily installed without any gap.
FRP and Carbon products are subject to slight individual differences. A little processing is no problem!" (Z-CARBON's products are more accurate than other companies' products.)
Other items that would be helpful
Point and hang of installation
By attaching the included Urethane Tape + Sponge tape (thin type) sold at 100-yen shops to the frame on the back side of the Plate, you can protect the frame from abrasion and wounds. "Human effort" Please put it on.
[Availability and clarity of the Instruction Manual
A simplified Instruction Manual was included, and even though it was simplified, it was easy to understand and follow because of the illustrated explanations.
[Notes]
There is nothing in particular. As mentioned above, after applying the anti-wound treatment to the frame, it is OK to carefully assemble the frame according to the Instruction Manual.
[ITEMS TO BUY TOGETHER
There is nothing in particular that I would recommend purchasing with this product.
[Opinions and requests to Manufacturer
I think it has decreased for various reasons, but it was relatively Reasonable and the quality was not bad among Carbon parts products. Z-CARBONSeries Please bring back the Lineup development of the "Lineup", please.
View detail
Not very well finished!
Waited for several weeks (Months), but disappointed with the finish!
There is 1 ventilation "scoop" right in the middle of the right and left piece with unclear, irregular contour cutting and lack of varnish on the cutting edge!
Dear, quite long delivery time, disappointed! But after paying the item price, shipping cost and import taxes! I will lose the amount of quite high import taxes! -------------------------------------------------- -------- Waited for several weeks (months), but disappointed with the finish! There are 1 "scoop" of ventilation in the middle of the right and left room with a clever, irregular contours cutting and gaps of varnish on the edge of cutting! Dear, fairly long, disappointed delivery time! But after the price of the item, paying shipping costs and import taxes! I will lose the amount of fairly high import taxes! Powered by Google Translator
View detail
Fits: HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA FE350S, HUSQVARNA FE450S, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE150I, HUSQVARNA TE250I, HUSQVARNA TE300I, HUSQVARNA TX300I, GASGAS EC250, GASGAS EC250F, GASGAS EC300
Frame guard installed TE??FE
The standard Achal ScrewFrame guard.
Cover range is wider than OEM.
Blue type Frame guard on the TE of Blue type Frame,
Black type Frame guard is attached to Black type Frame FE.
Remember to remove the OEMParts collar and use it.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I purchased this product for both heat protection and dress-up.
The fit is slightly floaty….
However, it looks like Carbon and is ideal for dress-up!
I bought it for heat protection, but I don't know how effective it is because the temperature doesn't go up where I live this time of year, but when I touched it after coming home, it didn't feel so hot, so I think there is a big difference between having this Cover and not having it!
We will continue to use the product as is!
View detail
BITTER X-GRIP
Fits well with 2023 Honda crf300l. The delivery of the product is fast and the quality is satisfactory. It is also easy to mount the product, so anyone can mount it. I like the frame protection and design the most. View detail
Maybe GSX1300R HAYABUSA riders need it?
I bought a GSX1300R HAYABUSA in the summer and when I was riding it, I felt a heat from my thighs to my buttocks that I had never felt before when waiting at traffic lights.
After installation, it is still hot, but it has eased up considerably.
I think I can manage to get on this one.
I have always wondered why GSX1300R HAYABUSA riders use Carbon Style frames, but after riding it, I found out.
View detail