Reviews
If Rolex made motorcycle parts
This K Factory triple tree is almost to nice for installation, I'd rather just look at it on the table all day! The quality of the finish and machine work is unreal. You can tell some real pride goes into the craftsmanship of these parts. They are nothing short of top shelf custom parts. View detail
GStrikerStem
I would like to give them all 5 stars, but I have to use them for a long time to know for sure, so I gave them honest stars.
As a product it shines and Parenthesis is good!
Looks good to Custom.
If there was one thing missing, it would be the key box.
But it is my favorite.
I'm glad I bought it
View detail
Triple clamp
Looks good. 。 And it cuts well. View detail
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250L
ZETA Zita Triple clamp kit
Installed on crf250lsMOTARD. The handlebar operation is very light. Although the price is quite expensive, I am glad I installed it. View detail
I can feel the effects
In the OEM state, it inevitably feels squishy and a bit unreliable.
I bought it because it was inexpensive and I was willing to make a mistake.
After installation, the Stem area will feel strengthened to the extent that you can actually feel it.
It may sound strange to say that it runs straight, but it runs tightly. tightly strengthened, the vibration in my hand seems to have increased.
View detail
Great
The exterior is unquestionably good looking.
I feel that the sense of luxury has been raised to the highest level.
The high price is a pain, but it is worth the purchase.
They say it takes about a week to install unless you are a skilled machinist, but I left mine with them for a day and it was done.
View detail
Wow that's cool
Increased rigidity provides peace of mind at high speeds.
Above all, it looks good.
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z1000Mk II
Sculpture is the best
I've never been so impressed with machining quality. Sculpture makes the very best parts. They made and shipped this out to me much sooner than estimated timeframe. View detail
Pricey, but also highly self-satisfying.
Neck bearing required separately, removal of key cylinderMounting bolt
The work is just beginning, but we will get to it when we have more time.
View detail
Fits: YAMAHA SR
TRAIL quantity is a Large thing.
Expensive product, but Offset:I really wanted 35mm For Separate Handlebars, so I saved up a little and bought them.
Since we originally used boreace's 47mm NORMAL Top Bridge, we can use the Meter Bracket and Key Cylinder Bracket without modification.
This is required for replacement from NORMAL.
Also, it would be better to have a lower bearing race that matches the bearing with OEM Parts.
A Pipe to type Race would also be nice.
The replacement will change the ride quality by a large amount.
In my case, the Merit is superior to the TireSmall diameter with Rear Ride Height Up, because I feel that I was able to compensate for the insufficient amount of TRAIL.
The replacement has improved stability at high speeds.
The Corner ring has a stronger Fee Ring as the Frame is laid down, and the initial response is slower than before.
Instead, it feels more stable after it is laid down, and the feeling during the Corner ring is Up.
The quality is as good as it gets, no complaints!
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Widening
I bought this to put a 5.5j in the front.
It's not cheap, but it's not bad. I had to cut the collar to get the center.
If you are doing your own maintenance, you should be able to install it easily.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZRX1200, KAWASAKI Zephyr 1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200 Daeg, KAWASAKI Zephyr 1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200 Daeg
K factory triple clamp set
I am super happy with the quality and craftsmanship that went into making this triple clamp set. It is the nicest clamp aet i have seen in all my years of custom bike building and will be purchasing more of them in future for other builds for me and my customers, item was extremely well packaged so not to get damaged in shipment, thank you View detail
Fits: HONDA NSR50, HONDA NSR80, HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSF100
no problem
This Stem Kit allows you to install the front part of your NSR50 into your MONKEY.
The other manufacturer has a pitch of 173mm, but SHIFT UP has a pitch of 172mm, but I was able to install it without any deviation and with perfect accuracy.
I think this is the cheapest way to install the NSR50 front set and the MONKEY OEM Handlebar Post.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
When front18-inchesing
It's hard to install the handlebar lock when you convert to another car's stem. It's also great that Aftermarket parts can install the handlebar lock. View detail
Feel a little bad
Before purchasing this triangle assembly kit, I looked for a large number of products of the same type, but unfortunately the products of other brands have been discontinued, and the products of other brands are not beautiful. In the end, I can only choose the products of the G craft brand. In terms of the first disadvantage, there is no color to choose from, the second is a bit monotonous, and the rest is only hoped for its durability. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
MORIWAKI
I finally installed it a year after I bought it and painted it Powder coat semi-gloss black to make it look NORMAL. It took me about 3 hours to install the stems and bearings. If you don't have the right tools and a medium level of maintenance skills, this is a tough job. The 45 is too quick and the cutting angle is too narrow. I think that the 45 is too quick and the cutting angle is too narrow, and I understand it well.I thought that it is a manufacturer who knows Z well again with the Offset that is just right for Normal fork and narrow 18-inches tire. View detail
Clean processing and strength
I couldn't lock the Handlebar because of the individual difference of the Frame, but Mr. GCraft did.
I was sent the color of the lock part. Thank you for your response.
I feel the strength around the handlebar is improved by the clean machining.
Separately, I also purchased the Swing Arm from GCraft and was pleased with the beautiful machining and accuracy.
View detail
unrated
It is a beautiful processing and wonderful, but Handle lock stayLeft Side interfered with Handle lock stayLeft Side and could not do Handlebar Lock. I think there may be individual difference of the vehicle, but it is not right at all. I think that the difference between the individual difference of the vehicle, but it does not fit at all. View detail
Excellent quality!
Hi you all, This product is of the highest quality and finish, its fits and works great. I would highly recommend this product to anyone who is in need of a good setup. Very Nice fitment with using honda nice forks. Good information about the item and shipment. Very fast production time even though it states a month it only took me two weeks. i highely recommend this item. View detail
fantastic upgrade
excellent upgrade to the bike the quality and build quality are second to none i absolutely advice this part if you are looking to run a lowered stance View detail