Reviews
It was not enough.
There is nothing wrong with the functionality, except for the Bolt section Material:Plastic and molded BALI are also available and do not appear to be of very good quality.
There are similar MirrorRepair Parts by TANAX, which are made of Gold genus and have a much better finish. (but it is heavy + has a weird logo mark of Tanax)
View detail
I'm sorry.
There is nothing wrong with the functionality, except for the Bolt section Material:Plastic and molded BALI are also available and do not appear to be of very good quality.
There are similar MirrorRepair Parts by TANAX, which are made of Gold genus and have a much better finish. (but it is heavy + has a weird logo mark of Tanax)
View detail
It was helpful
[How is it used?
Use for Mirror Replacement
Was the one you received as per Image?
It was just like the image.
How was your experience with it?
It was very good.
[Points to note]
Not particularly.
How did it compare to other products?
Not particularly.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Not particularly.
View detail
Fits: YAMAHA , YAMAHA MT-25, YAMAHA FZ8, YAMAHA FZ1, YAMAHA MT-03
MT-09 (2023) Used for
Used to install high sider bar end mirror on MT-09 2023 MODEL
Note that on Webik, the MT-09 compatible Heavy Weight Bar End is the M16 one. (Bar End standard has changed since 2021MODEL)
There is a non-heavy weight Yamaha M6Universal Product, but the difference is not only whether or not it is heavy weight, but also whether or not the fixed position can be fine-tuned.
The heavy weight one is not adjustable horizontally, and the angle is also stuck when the Mirror Bolt is closed.
Non-heavy weight products are fixed in the quantity position.:Pair (for Left and Right) The angle can be moved by hand even after the Mirror Bolt is closed.
Quantity:Pair (for Left and Right) I prefer Heavy weight because I am a person who wants to align with Exactly in （I prefer the Heavy weight (the texture is also better).
Also, if you want to put Mirror down either way, you need to face the sharp side outward to do it.
View detail
Thank you very much
I have just received the product.
Thank you for your very good response.
I hope to have a good shopping experience next time.
View detail
Delicate product!
The Ideas is very nice but too moronic. The Torque wrench is specified for tightening, but would you use a Torque wrench to tighten it if it comes loose on the road? Ideas is good, but please improve it! View detail
Fits: HONDA Monkey Limited (MONKEYLIMITED), HONDA SUPER CUB 110 (SUPER CUB), HONDA Monkey (MONKEY), HONDA ZOOMER (ZOOMER), HONDA ZOOMER, HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA SUPER CUB 110 (SUPER CUB), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA LITTLE CUB (LITTLE CUB)
MR-A8S
My friend was worried about thread protection in the consoles of his SUPER CUB CUSTOM, I offered him these spacers. As expected, there are no complaints about the product, the installation went without problems, everyone was satisfied. If you are thinking about protecting the threads in the remote control and placing some additional equipment (windshield, phone fasteners or additional light), this is an excellent solution. View detail
Good.
Easier and better rearward visibility. View detail
Mirror by Yamaha
This is something that is inevitably needed because Yamaha's Mirror uses Opposite Thread Screws. View detail
Angle the Mirror
The Mirror Holder for the external Master Cylinder is only 90 degrees to the Cylinder, and the angle is different from that of the Normal Clutch Side Holder. Although this is not the normal way to use the Mirror Holder, this product can be used to match the angle and position of the Mirror Holder on the NORMAL side without any discomfort. The angle is about 20 degree backward inclination. When I used it for brembo, I had to widen the hole slightly, but when I used it for MT-10's Normal clutch, I felt almost no discomfort. View detail
Fits: YAMAHA , YAMAHA MT-25, YAMAHA FZ8, YAMAHA FZ1, YAMAHA MT-03
For MT-09 2021 and up
I was using a YAMAHA For M6, the less heavy one, and replaced it with this one.
The high-sider Mirror is EXACTLY hooked and the Handlebar vibration is pleasantly reduced.
It is not listed as compatible, but it will fit into the MT-09 from 2021 onwards with Exactly.
View detail
I'm glad it's rust resistant!
I used it to replace Mirror on an AddressV125 that a friend gave me! It works normally!
It would be nice if the design was a little more unique or better made!
View detail
Shield mounting Bracket was diverted to extend the Bracket.
[How is it used?
This Adapter was diverted to install a DAYTONA Windshield RS for a Honda Grom on a KTM390DUKE.
Was the one you received as per Image?
It was a good Size to extend the Bracket.
Was the installation difficult?
The Shield is installed in basically the same way as when it is installed on the Grom, but since it was necessary to install the Shield closer to the rear of the vehicle, this Adapter was inserted between the Shield mounting bracket, and the entire Screen was shifted backward.
How was your experience with it?
The Shield did not vibrate violently due to wind pressure even when cruising at 100 km/h on the highway. To be sure, we used Screw lock fluid to prevent the Bolt from loosening.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
View detail
Yamaha's Opposite Thread Screw A must-have for cars
I purchased this product when I switched to Napoleon OnMirror because my OEMMirror was rusting.
The Mirror position is slightly higher, but it was successfully installed.
View detail
Z2 Mirror has ….
The diameter is too narrow and it was not suitable for Z2 Mirror. View detail
Spacer with Opposite Thread Screw
I bought Spacer because I needed to replace RightMirror on my YAMAHA car with Other Brand Product.
When I searched for Opposite Thread Screw Spacer, I found that Large Mortar was a Spacer that converts to Normal Thread Screw→Opposite Thread Screw, but this product is a Spacer that converts to Opposite Thread Screw and gains height as Opposite Thread Screw. This product gains height as it is Opposite Thread Screw.
I found it to be a modest and useful product.
View detail
It's neither good nor bad
Mirror by M-TEC (Shockproof Measured) was installed and when I took it to Plaza for inspection, I was told that it was not covered by the vehicle inspection, so I purchased it.
It is neither too expensive nor too expensive, but the position of Mirror is higher than expected, which is a little disappointing to look at.
View detail
Honda old for VehicleMirror installed on CUBC125 (JA58)
Installed a hand-held old Honda Mirror (8mm positive thread)
OEM 10mm Mirror with reverse thread 10mm Handlebar side with positive thread
So I looked for an Adapter with 8mm Mirror side positive thread and 10mm Handlebar side positive thread.
Equivalent to Tanax CM-2 Easy to install, just remove and replace OEM
I like it because it looks Classical.
View detail
Good product
The MRMirror I own has a footing Plate B Type and I have just purchased this product to install on my ZrX400.
The price is high, but the accuracy is perfect because it is a dedicated product.
View detail
Conversion fixed
The Fixing Screw diameter of the Mirror I tried to install seems to be different, and I wanted to fix it with M10→M8.
The price is not too expensive, the size is not too large, and it can be fixed in a good way.
View detail