![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Bar End Stop Rubber](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0278/23448810_1_TS.jpg)
I can't get it.
Purchased as a temporary substitute.
When I tried to remove it two weeks later, it was stuck inside the handlebar or something, and no matter how hard I pulled it, it did not move at all, and I could not get it off at all (I had loosened the Screw enough to make it spin).
I struggled with it for about an hour but was frustrated. I gave up trying to pull it out by hand and decided to prepare a tool.
And two weeks after I prepared the tool to pull it out (about $2,000), I pulled it lightly before using the tool. "What? Did you get out of there easily?"
Did leaving it for an extended period of time cause the Rubber to revert back to its original state?
It's good that you got out so easily, but it was expensive.
View detail
![[Repair/Option Parts]Aluminum Billet Bar End Heavy weightOuterM8](https://img.webike-cdn.net/catalogue/images/101907/26163_TS.jpg)
Handlebar End
There are some individual differences.
Because of its Weight compared to OEM
There is a reduction in hand numbness from Handlebar vibration.
Since the car body is Lime green
Green Light's Bar End looks great.
It also increases motivation to run.
View detail
![Ultra Heavy Bar End Outer](https://img.webike-cdn.net/catalogue/images/90151/031879-12_TS.jpg)
Installed on Z900RS
I had the internal Heavy weight, so I bought this one in Champagne gold for the purpose of changing the color of the Bar End. The texture is very good and it is just beautiful. I wish it were a little cheaper, but I am satisfied with it. With this size Heavy weight installed, I hardly feel any vibration on the Handlebar. View detail
![Ultra Heavy Bar End Outer](https://img.webike-cdn.net/catalogue/images/90151/031879-21_TS.jpg)
POSH Faith Ultra Heavy Bar End Outer
SRX has a longer Bar End as Standard Equipment, but it is already discontinued.
While products of similar length are hard to find, this one is just right, although it is one size too large.
View detail
![[Bar End Repair Parts] Solid Bar End Rubber S](https://img.webike-cdn.net/catalogue/images/22383/031177-71_01_TS.jpg)
the expendables
To be honest, it is just a Rubber, but without it, the Handlebar End cannot be installed.
And once the Bar End is installed, this Rubber part is crushed and fixed, so the Rubber is deformed once it is installed. Therefore, it is practically not reusable. When I reused a Bar End before, only one Bar End fell off and went missing, and I had to repurchase the whole Bar End.
Since then, we always replace the rubber with a new one.
At least, we are selling Rubber Only, Washer Only, and Repair PartsSingle Body.
View detail
![Ultra Heavy Bar End Outer](https://img.webike-cdn.net/catalogue/images/90151/031679_06_002_TS.jpg)
A little pricey
I bought it because I wanted to immeChain it, and I think the price is a little high for just the Outer Cover. View detail
![Combination bar end outer](https://img.webike-cdn.net/catalogue/images/102703/e53109k12t_02_TS.jpg)
Gold&Blue
[How is it used? Touring
Was the one you received as per Image? Street Image
Was the installation difficult? There's nothing wrong with it.
How was your experience with it? no problem
[Included Parts:were they on? Quantity:Purchase with Set
[Was there anything that disappointed you? Bar End is light
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
![Handlebar End Spacer (Collar)](https://img.webike-cdn.net/catalogue/images/114416/AT-W0007_TS.jpg)
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Effective for moving in the vibration range.
[How is it used?
Grip vibration reduction during driving
Was the one you received as per Image?
Exactly the same as the one in the photo shown.
Was the installation difficult?
It is very easy to remove the Bar End and install the collar.
How was your experience with it?
It does not eliminate vibration when driving, but it changes the rotation range at which vibration occurs.
Vibrations have been considerably reduced when driving except at high speeds up to now.
However, the vibration has not been eliminated, although it has been reduced,
If the situation remains the same for a long time, it will remain painful.
People who think this product is good for different people have different normal use RPM range,
There seems to be a clear division between those who think it is not effective at all and those who think it is not effective at all.
One Side of the collar has a Ring-shaped stripe, but the orientation is that of outward mounting.
The appearance is simple and thin, so it is not noticeable and does not feel like you are wearing it.
The construction itself is very nicely made and of very good quality.
[Included Parts:were they on?
Because it has a resin color that matches the Bar EndMounting Bolt,
To be used in accordance with the type of car.
A brief instruction manual is included.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Even though the material is Titanium, I would like to see a lower cost.
It's not bad as a thing, but I think lowering it a bit would make it easier to get a good deal on a bad one.
Satisfaction level 3 in terms of Cost
View detail
![Ultra Heavy Bar End Outer](https://img.webike-cdn.net/catalogue/images/90151/031679-26_TS.jpg)
For a change of pace around Handlebar!
There is no doubt about the quality of the product!
This time, we wanted to tighten up the Handlebar area with black, so we used matte black.
This is a Cover Only replacement.
View detail
![Handlebar End Spacer (Collar)](https://img.webike-cdn.net/catalogue/images/114416/AT-W0007_TS.jpg)
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
I didn't know.
I drove continuously at 4000 rpm 100 km/h and felt no change in vibration, still numb.
Heavy weight bar end may be more effective.
In fact, it would be best if it had a rubber mount heavy weight.
AfterMarket has almost no such products.
Although it is possible to wrap the NORMALWeight with lead Seat, the appearance will probably be no good.
View detail
![[Repair / Optional Parts] Billet Aluminum Bar End Fitting Mount Set](https://img.webike-cdn.net/catalogue/images/101907/26129_TS.jpg)
Off-road motorcycleHandlebar replacement
I purchased this for an off-road motorcycle and hand guard fixation. The quality is fine and it does its job well. View detail
![Combination Bar-End Inner Adapter](https://img.webike-cdn.net/catalogue/images/102703/e531085ruta_01_TS.jpg)
Fits: YAMAHA NIKEN, YAMAHA NIKEN GT, YAMAHA MT-07, YAMAHA MT-07 ABS, YAMAHA MT-07 ABS, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR700, YAMAHA XSR900, YAMAHA XSR900, YAMAHA XJR1300, YAMAHA MT-10
It was also applicable to MT-10
It worked for MT-10.
The black Anodized Finishing makes the gaps less noticeable even if they are visible.
View detail
![[Bar End Repair Parts] Oval head screw & Machine screw](https://img.webike-cdn.net/catalogue/images/22383/031071-70_01_TS.jpg)
Repair item Screw replacement
No problems with the quality and feel of the product, as it is a Repair product Screw.
I appreciate the fact that there is a repaired product, but it would be nice to be able to buy from 1 pc since I don't use it that much.
View detail
![Handlebar End Spacer (Collar)](https://img.webike-cdn.net/catalogue/images/114416/AT-W0007_TS.jpg)
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Vibration countermeasures
I was hoping for a slight vibration reduction in the Handlebar, but nothing changed. It's a pity. View detail
![Bar End Stop Rubber](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0278/23448810_1_TS.jpg)
It's not visible, but I'm satisfied.
It is a part that cannot be seen once installed, but I am very satisfied with the universal performance of the product. View detail
![Ultra Heavy Bar End Outer](https://img.webike-cdn.net/catalogue/images/90151/031879-04_TS.jpg)
Satisfied with the quick response.
Since the lever was replaced with a Speedra gold one, the bar end was Champagne gold, so we asked for a Speedra bar end in the same color. The cover that arrived at the store was not the one that was returned. The cover I received was eligible for return, so I inquired about it, and they quickly responded by replacing the original within a week, View detail
![Bar End Spacer](https://img.webike-cdn.net/catalogue/images/89042/HH05-1_1_TS.jpg)
Required to fix the Bar End of a Steel handle with a Large inner diameter.
[How is it used?
When we tried to attach ZETA's PROArmor Handguard Bend to KLX230R's STD Handlebar, the Bar End Adapter that comes with the PROArmor Handguard Bend was designed for use with the Smallest aluminum Handlebar. Therefore, it could not be fixed to the bar end of a steel handle with a large inner diameter (NORMAL). Therefore, we purchased the PROArmor Handguard Bend Bar End Adapter for the purpose of making it compatible with a large inner diameter.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It took some force to put it on the Bar End Adapter for PROArmor Handguard.
How was your experience with it?
It matched the KLX230R's steel handle inner diameter and was secured perfectly.
[Was there anything that disappointed you?
Nothing in particular, but it would be better if the outer circumference had a non-slip finish.
[With or without Instruction Manual
No Instruction Manual is available
[Notes]
Since there is no non-slip surface on the outer circumference, it may be easy to rotate when falling down unless used with SIDE/FrontHand Guard Mount.
Opinions and requests to Manufacturer
Also develop products with non-slip finish on the outer circumference.
View detail
![End Spacers for Handlebar](https://img.webike-cdn.net/catalogue/images/89714/2_000000011573_TS.jpg)
I need it at the time of vehicle inspection.
I bought it early, although it is not yet inspected. View detail
![Handlebar End Spacer (Collar)](https://img.webike-cdn.net/catalogue/images/114416/AT-W0007_TS.jpg)
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Influence on vibration?
Installation is easy, just insert it between the Grip and Bar End with a Hexagonal Wrench1 pc. I feel that the slight vibration is somewhat reduced. I feel that the slight vibration has been reduced. I think it's just a matter of feeling, but if the vibration is reduced even if I don't notice it, I think it's OK. View detail
![Handlebar End Spacer (Collar)](https://img.webike-cdn.net/catalogue/images/114416/AT-W0007_TS.jpg)
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
For even greater vibration reduction!
I could feel the vibration reduction effect of AELLA's Bar Weight alone, but I bought it for further effect.
I'm not sure about the effectiveness of the product unless you are on a long distance touring trip.
View detail