Reviews
Fits: HONDA NC700S, HONDA GL1500GOLD WING, HONDA GB250 CLUBMAN, HONDA CBR600RR, HONDA CBR600F, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB750, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB1300 SF, HONDA CB1100 RS, HONDA CB1100 EX, HONDA CB1100, HONDA CB1000 SF (Big One), HONDA CB-1, HONDA HORNET600
Looks Upgrading:??
The NORMAL feeling is not bad, but this one is more Upgrading??Cost is not bad either! View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, YAMAHA MT-10SP, YAMAHA MT-25, YAMAHA TRACER900, YAMAHA TRACER900GT, YAMAHA MT-10, YAMAHA MT-09 TRACER, YAMAHA MT-09 A, YAMAHA MT-07A, KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI Ninja1000SX, KAWASAKI Ninja1000, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, YAMAHA MT-03, YAMAHA FZ8, YAMAHA FAZER8, SUZUKI GSX-R750, SUZUKI GSX-R600
Matching Brake Side.
[How is it used?
I have a reservoir tank cap of Master Cylinder of Front brake of a certain foreign Motorcycle that I bought used. PREMIUM ZONE Master cylinder tank capΦ59" The reservoir tank cap on the Hydraulic Clutch side was also replaced with the same product.
Like the Brake Side, the surface of the cap was crusty due to age and deterioration, so it was great to find a product that matched the dimensions.
Was the one you received as per Image?
I had already been using this series on my Brake Side cap and it was exactly as I had imagined.
Was the installation difficult?
Gently remove the original OEMCap and clean the Diaphragm that came off with it to Beauty. PREMIUM ZONE Master cylinder tank cap Diaphragm to Quantity:Set and firmly attach the reservoir tank to the Master Cylinder reservoir tank, and you are done.
As mentioned above, the installation itself is a very simple process and there is nothing to worry about.
How was your experience with it?
Naturally, nothing has changed in terms of functionality.
Like the cap on the Brake Side, the surface of the cap has become blurred white due to age-related deterioration. "Tiredness." was produced, so the appearance was dramatically improved.
Now the HandlebarQuantity:Pair (for Left and Right) The reservoir tank caps of the two are both gorgeous and visually good.
Everyone has their own likes and dislikes about Design. Good. It may not be every day that a product that the owner thinks is It feels good." If you think it is, that is all that matters.
[Included Parts:were they on?
No, it is a Simple product with only a Cap in a relatively luxurious Package.
[Was there anything that disappointed you?
In the first place, I bought this product for its appearance, not for its performance UpParts in terms of functionality, and I was not disappointed at all.
Other items that would be helpful
Point and hang of installation
It is not a product that has a Habit to install. Was the installation difficult? I think Large is sturdy if you work as described in the section on
[Availability and clarity of the Instruction Manual
The product is so easy to install that anyone who purchases this product for this product will have no problems.
Since they are dress-up parts, there are few products that are easier to understand than these.
[Notes]
This time, we are replacing the lid of the reservoir tank of a hydraulic clutch. The fluid we are using is a highly absorbent brake fluid, so we should avoid working outdoors in bad weather or in humid places due to its nature.
[ITEMS TO BUY TOGETHER
DAYTONA's PREMIUM ZONESeries of Handlebar End Ya Filler cap. It may be a good idea to match the whole with etc.
[Opinions and requests to Manufacturer
If possible, please also bring back the brembo compatible caps that used to be in the lineup.
View detail
Fits: Others NISSINMaster cylinder tank cap O.D. 59 (some φ61)
Communication failure! Reposting because the image was not reflected.
[How is it used?
The reservoir tank of the Master Cylinder of the front brake of a certain foreign motorcycle that I purchased used was deteriorated over time and had cracks on the surface. PREMIUM ZONE Master cylinder tank cap At that time, we also had a cap for Brembo on the lineup.
It was a time when it was more difficult to obtain Repair Parts from overseas brands than it is today. OEMRepair Parts that you never know when you will receive." Than Other Brand Products near you. So I bought it on the spur of the moment because it looks gorgeous.
Was the one you received as per Image?
The product was exactly as shown in the image on Webike's product Site and as per Image.
Was the installation difficult?
Gently remove the original OEMCap and clean the Diaphragm that came off with it to Beauty. PREMIUM ZONE Master cylinder tank cap Diaphragm to Quantity:Set and firmly attach the reservoir tank to the Master Cylinder reservoir tank, and you are done.
As mentioned above, the installation itself is a very simple process and there is nothing to worry about.
How was your experience with it?
There is no functional change at all, but the appearance is dramatically improved since it is a replacement for the original tired Cap.
Since the brake master side became so gorgeous, the deterioration of the master cylinder cap of the hydraulic clutch was emphasized, so the clutch side cap was also replaced later in order to maintain balance.
Everyone has their own likes and dislikes about Design. Good. It may not be every day that a product that the owner thinks is Parenthesis good If you think it is, that is all that matters.
[Included Parts:were they on?
No, it is a Simple product with only a Cap in a relatively luxurious Package.
[Was there anything that disappointed you?
I bought it because I liked the way it looked and I was not disappointed at all.
Other items that would be helpful
Point and hang of installation
It is not a product that has a Habit to install. Was the installation difficult? I think Large is sturdy if you work as described in the section on
[Availability and clarity of the Instruction Manual
A simple Instruction Manual is included in the package, but the product is so easy to install that anyone who purchases this product for this purpose will have no problems.
[Notes]
Since this is the process of replacing the lid of the brake fluid reservoir tank, avoid working outdoors in bad weather or in humid places due to the nature of brake fluid, which is highly water absorbent.
[ITEMS TO BUY TOGETHER
DAYTONA's PREMIUM ZONESeries of Handlebar End Ya Filler cap. It may be a good idea to match the whole with etc.
[Opinions and requests to Manufacturer
If possible, please also bring back the brembo compatible caps that used to be in the lineup.
View detail
Fits: Others NISSINMaster cylinder tank cap O.D. 59 (some φ61)
About our products
[How is it used?
It's just a look.
Was the one you received as per Image?
It is a quintessential DAYTONA product.
Was the installation difficult?
It is quite simple.
How was your experience with it?
It matches the car body perfectly.
View detail
Fits: HONDA CB125R, HONDA CB223S, HONDA CB250F, HONDA PCX125, HONDA PCX150, HONDA VTR-F, YAMAHA Helmet in JOG, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA GRAND AXIS, YAMAHA AXIS 90, YAMAHA XT250X, YAMAHA WR250, YAMAHA TW200, YAMAHA TW225, YAMAHA JOG90
Recommendation to dress-up around Handlebar
[How is it used?
Installed on a PCX125JF56. the brake master cylinder cap had deteriorated considerably and was very dirty, so I decided to buy this product which can dress-up the cap.
Was the one you received as per Image?
I am very satisfied with the product, the texture and appearance are better than I expected.
Was the installation difficult?
It's easy, just remove the OEM brake master cylinder cap and put it in the same position. I used the supplied bolt to secure it in place.
How was your experience with it?
I am glad I changed it because it is a One Point around the Handlebar and the Tension goes up every time I drive. It is a little Custom, but I think the quality is very good for this price.
[Included Parts:were they on?
It contains an attached fixing Bolt.
The OEM bolt can be removed with a Phillips screwdriver, but I think the supplied special bolt is hexagonal.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: Others NISSINMaster cylinder tank cap O.D. 59 (some φ61)
Why don't you just focus on looks?
Why don't you just focus on looks?
[How is it used?
The reservoir tank of the Master Cylinder of the front brake of a certain foreign motorcycle that I purchased used was deteriorated over time and had cracks on the surface. PREMIUM ZONE Master cylinder tank cap At that time, we also had a cap for Brembo on the lineup.
It was a time when it was more difficult to obtain Repair Parts from overseas brands than it is today. OEMRepair Parts that you never know when you will receive." Than Other Brand Products near you. So I bought it on the spur of the moment because it looks gorgeous.
Was the one you received as per Image?
The product was exactly as shown in the image on Webike's product Site and as per Image.
Was the installation difficult?
Gently remove the original OEMCap and clean the Diaphragm that came off with it to Beauty. PREMIUM ZONE Master cylinder tank cap Diaphragm to Quantity:Set and firmly attach the reservoir tank to the Master Cylinder reservoir tank, and you are done.
As mentioned above, the installation itself is a very simple process and there is nothing to worry about.
How was your experience with it?
There is no functional change at all, but the appearance is dramatically improved since it is a replacement for the original tired Cap.
Since the brake master side became so gorgeous, the deterioration of the master cylinder cap of the hydraulic clutch was emphasized, so the clutch side cap was also replaced later in order to maintain balance.
Everyone has their own likes and dislikes about Design. Good. It may not be every day that a product that the owner thinks is Parenthesis good If you think it is, that is all that matters.
[Included Parts:were they on?
No, it is a Simple product with only a Cap in a relatively luxurious Package.
[Was there anything that disappointed you?
I bought it because I liked the way it looked and I was not disappointed at all.
Other items that would be helpful
Point and hang of installation
It is not a product that has a Habit to install. Was the installation difficult? I think Large is sturdy if you work as described in the section on
[Availability and clarity of the Instruction Manual
A simple Instruction Manual is included in the package, but the product is so easy to install that anyone who purchases this product for this purpose will have no problems.
[Notes]
Since this is the process of replacing the lid of the brake fluid reservoir tank, avoid working outdoors in bad weather or in humid places due to the nature of brake fluid, which is highly water absorbent.
[ITEMS TO BUY TOGETHER
DAYTONA's PREMIUM ZONESeries of Handlebar End Ya Filler cap. It may be a good idea to match the whole with etc.
[Opinions and requests to Manufacturer
If possible, please also bring back the brembo compatible caps that used to be in the lineup.
View detail
Fits: YAMAHA YZ450FX, YAMAHA YZ65, YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA XT250X, YAMAHA YZ125, YAMAHA XT250, YAMAHA WR250X, YAMAHA WR450F, YAMAHA WR250R, YAMAHA TRICKER, YAMAHA WR250F, YAMAHA SEROW250, HONDA CRF300L, HONDA CRF300RALLY, HONDA CRF250RALLY(S)
Not that I need it!
I know it's not cosmetic, but I had to put it in!
I'm thinking today that it's okay because it's kind of fun to tinker with it!
It's fun to polish, it's fun to watch, and it's fun to go to the mountains...
View detail
Fits: HONDA LEAD 90, HONDA LEAD 100, HONDA LEAD 100, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA FORZA250, HONDA CRF250L, HONDA CBR125, HONDA CBR150R, HONDA CBR250R (2011-), HONDA ADV150, HONDA FORESIGHT, HONDA FORZA(MF10), HONDA FORESIGHT, HONDA DIO110, HONDA NSR80, HONDA NS50F, HONDA NSR50, HONDA GB350
Self-sufficient Attachment
These are self-satisfied parts that emphasize appearance.
Quantity:Pair (for Left and Right) I put it on my car and it looks good when I ride in the car!
View detail
Fits: HONDA CBR600RR, HONDA CBR600F, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F, HONDA X4, HONDA X-11, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1000 SUPER FOUR (Big One), HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1000 SUPER FOUR (Big One)
These are essential parts for the sober-minded!
It's like an introduction to the cutting PARTS of ANTLION that I've always wanted to be a part of. "HONDA" The letter Master cylinder cap is installed.
I had high expectations for antlion because it is a well-known brand that sells high quality products with extremely high cutting precision,
As I expected, the actual product was excellent.
The black anodized treated cut-out master cylinder cap has a finish with slight cutting blade marks on both the front and back, a spec. that will make the hearts of us men who love large industrial products throb with excitement (lol).
Die-casting (cast metal) cannot express this quality, so I am glad I bought it.
It takes only 5 minutes to exchange and the price is reasonable,
I think this is the best buy for those who are just starting out with custom.
I hope my Review is helpful.
View detail
Fits: HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA X-11, HONDA CBR600RR, HONDA X4, HONDA CBR600F, HONDA CB400SF, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F
Every time I get on the train, my eyes are drawn to it!
Master cylinder cap from antlion was installed.
There are four colors available, and I chose Black this time, although I hesitated between Titaniumium blue and Titaniumium blue because I don't like flashy feeling.
Replacement was an easy task that took only 5 minutes with a Phillips Screwdriver 1 pc and the included Hexagonal Wrench. (Material included in the kit):(Stainless Steel countersunk screws are of the hexagonal hole type, not the + type, so an L-Type Hexagonal Wrench is also included in the product, which is a very kind design.)
What I found when I installed it, 'My own eyes go well. (laugh) It's not so much that they stand out from the side, but that I can't help but notice them (laugh).
The texture is also of excellent cutting precision, as is typical of Antlion,
The finish is typical of Japanese industrial products.
"CB" is not printed as is often the case, but cut, so the letters "Shiningly" and "Shiningly" are not printed.
It is assertive and nice,
I hope my Review is helpful.
View detail
self-satisfaction
One pointAccent of self-satisfaction View detail
Fits: HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA CB400SB, HONDA CB400SF, HONDA CB750, HONDA CB900HORNET, HONDA CBR1000RR, HONDA CBR1100XX, HONDA CBR600F, HONDA CBR600RR, HONDA DN-01, HONDA HORNET250, HONDA HORNET600, HONDA NSR250R, HONDA RVF400, HONDA RVF750, HONDA VFR800, HONDA VTR250
Large human tint
I used to have a gold master cylinder cap from Speedora, but now that I'm getting older, I've decided to stop using anodized custom like a kid who just got his license, so I'm replacing various body parts. I am a large person like a child who feels lonely with OEM and I want to enjoy custom. I am a little worried that the anodized finish will fade over time as you say. (In fact, the Speedra GoldCap that was replaced was also faded.) 。 View detail
Fits: BMW K 1200 R Sport, BMW K 1200 R, BMW K 1200 S, BMW K 1300 GT, BMW K 1300 R, BMW K 1300 S, BMW M 1000 RR, BMW R 1250 GS Adventure, BMW R 1250 GS, BMW R nineT Pure, BMW R nineT Pure, BMW R nineT Racer, BMW R nineT Scrambler, BMW R nineT Scrambler, BMW R nineT Urban G/S, BMW R nineT Urban G/S, BMW R nineT, BMW R nineT, BMW S 1000 RR, DUCATI Multistrada 1200 S
Fluid cap
It's hard to put the Ring in the middle. View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB125R, HONDA CB223S, HONDA CB250R, HONDA CB400SS, HONDA CB650R, HONDA CB650R, HONDA CBR1000RR, HONDA CBR400R, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY S
Easy dress-up!
I bought it as a dress-up! I knew I wanted to enjoy the ride and be satisfied with the look of the car. The work itself is super easy! Just remove the screws, replace them with OEM ones, and install them again.
The DAYTONA is high quality and I was satisfied with its appearance and large size! I'm not sure if it's the price or the quality, but if you want to be satisfied with the look and feel of the product, please install it!
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, HONDA CBR1000RR, HONDA CBR1000RR, KAWASAKI Ninja ZX-25R SE, KAWASAKI Z1000, YAMAHA MT-10SP, KAWASAKI Ninja250SL, YAMAHA MT-10, YAMAHA MT-09, KAWASAKI VERSYS1000, YAMAHA MT-09, YAMAHA MT-09 A, YAMAHA MT-09 TRACER, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-03, YAMAHA FZ8, YAMAHA MT-07A, YAMAHA FAZER8, SUZUKI GSX-R750
good (quality)
Good color and quality. good for One point custom. View detail
One point casually
One point casually
(goods) self-satisfied
View detail
Fits: HONDA GROM, HONDA PCX125, HONDA XR100MOTARD, HONDA NSR50, HONDA CBR250RR, KAWASAKI Ninja250R, KAWASAKI Ninja250, KAWASAKI Z250, KAWASAKI Ninja250SL, KAWASAKI D-TRACKER X, KAWASAKI KLX250, KAWASAKI D-TRACKER125
The ruggedness is nice Parenthesis.
Dress-up parts are a matter of feelings. If it makes you feel good to put it on, it's good. I have not had any problems so far with the change from OEM that I am concerned about. View detail
Fits: HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA CB400SB, HONDA CB400SF, HONDA CB750, HONDA CB900HORNET, HONDA CBR1000RR, HONDA CBR1100XX, HONDA CBR600F, HONDA CBR600RR, HONDA DN-01, HONDA HORNET250, HONDA HORNET600, HONDA NSR250R, HONDA RVF400, HONDA RVF750, HONDA VFR800, HONDA VTR250
Faded and replaced.
I used to wear a gold cap, but it faded over time to a champagne gold or white, so I bought it from webike.
Since the amount of information around Stem is bothersome, I chose Black for this project.
I also bought a Red MASTERBand to match, and this combination was the right choice.
However, I am concerned that POSH's and Mukawa's Anodized Treatment fades very quickly due to ultraviolet rays. (Initial Adjuster&Stem Nut Cap is faded as shown in the 2nd and 3rd pictures, even though the Stem Nut is well colored...)
If it weren't for this, I would give it 5 stars. (Lol) 。
View detail
Fits: HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB400SB, HONDA CB400SF, HONDA CB650F, HONDA CB650R, HONDA CB650R, HONDA CB650R, HONDA CB750, HONDA CBR1100XX, HONDA CBR600F, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000L Africa Twin
EasyCustomization
ScrewQuantity:The two components can be easily installed by simply removing them, and they are now visible while driving and look very much like a parenthesis. This is the easiest customization. View detail
Smaller Parts.
What made you decide to buy?
KOHKEN:Mechanical Clutch Holder to be compatible with RCSBrake master
[How was the installation?
I used Tweezers to attach the Mechanical Clutch Holder because the seal itself is small. Pasting is a one-shot job!
How was your experience with it?
I think it is more consistent with RCSBrake master. I would be happy if it were a little cheaper.
View detail