Reviews
Nice quality red anodizing not pink like some other brands
Nice quality red anodizing from Special Parts Takegawa not pink like some other brands. Light weight aluminium banjo bolt beautifully machined and finished to give my Honda Monkey 125 motorcycle that high end finish I am looking for. Pricing maybe slightly higher then a few other brands available here on Webike but like they always say, you get what you pay for. When working with anodized bolts like this I like to use single hex sockets to minimise the chance of damaging the coating and keep them looking as new after installed on my motorcycle. View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON DYNAFamily
Batch.
The texture and installation were perfect.
It's nice
View detail
color coordination
Brake hose color is replaced to match.
I'm not sure if this is a good idea or not, but it's a good idea. I'm not sure if I can help it.
View detail
Brake hose replacement
I bought this stainless black to replace the Buildaline brake hose with stainless black and to connect to the Brembo caliper.
It's pricier than Aluminum … but I had to do it to unify the two. It looks nice and I like it.
View detail
ActiveBanjo bolt
I didn't see the color you were looking for!
They had it here and I bought it immediately.
Very good with a wide range of products!
View detail
Caliper stainless steel banjo bolts
No point refitting those old OEM Suzuki steel banjo bolts when it comes time to change out the OEM rubber brake lines for some stainless steel braided brake lines from HEL Performance. The cost of these bolts are market priced and the quality is excellent with no complainants from me. When ordering replacement banjo bolts or bleeder screws just keep in mind there are different diameter and thread pitch bolts and screws available from Webike and make sure you know what your motorcycle needs. Installation is straight forward just fit new copper crush washers and tighten to the required torque as per OEM specifications. View detail
Fastener upgrade while swapping out brake lines
When the maintenance job came up to upgrade to stainless steel braided brake lines on my Suzuki SV650 it was a no brainer to also upgrade the master cylinder double banjo bolt. Braided brake lines from HEL performance were used so to was their fastener to eliminate the chance of introducing problems into the installation process. The stainless steel double banjo bolt is excellent quality and the price is reasonable. No hesitation to use HEL perforamnce products again in the future. Do not forget to replace the copper crush washers when doing a job like this to prevent the possibility of fluid leaks. View detail
ActiveBanjo bolt
I'm happy with the color MaterialLarge strange. More to come.
I'm going to use it.
View detail
Necessities for brembo conversion
I bought this one because Bolt pitch is changed along with brembo conversion.
No problems at all with accuracy.
Crash washer is also included.
The brembo has a special bolt pitch and neck underneath, and does not come with a Banjo bolt, so a Banjo bolt is required for domestic motorcycles.
It is an important part, so I thought it would be good to click here which is a highly reliable brand.
View detail
Create your own brake line
This is a standard part for Brake line production.
Combine Aluminum's RedBlue to make it look like the 1980s, or
You can use Stainless Steel to create a chic look, or you can play with it to create your own brake line.
View detail
The classic Banjo bolt
[How is it used?
NISSIN Brake master on ApriliaRS4 125 (https://www.webike.net/sd/1448239/) It was used to install the
I chose this product because it came up first when I looked up M10×P1.25 Banjo bolt in order of popularity.
Was the one you received as per Image?
There was a Red color setting, so I chose Red because I wanted to change it.
The multiple photos made me feel comfortable with my purchase. The one I received was exactly as pictured.
How was your experience with it?
It's no surprise, but it's not a bad performance for a Banjo bolt at all.
However, I don't know if my tool is too delicate or not. The paint on the corner came off....
To prevent fluid leakage, it is necessary to apply the torque firmly, so it is cheaper to use a proper tool.
[Products compared, etc.].
We compared it with other Manufacturer's Banjo bolt.
The price is similar, but I chose this product because it had the Red color setting and the evaluation of the impression was good.
I also had a sense of security because it was produced by a famous manufacturer called Active.
【Review】
The Banjo bolt can be used with confidence, and while it's inexpensive at 550 yen, it comes in many colors, so you have a lot of choices.
It's not so much that this product is bad, it's more that the tool is a bit lickable, so use a good tool.
View detail
Stainless rather than Aluminum
Material:Stainless Steel Banjo bolt is beautiful and easy to install. View detail
Banjo bolt
This is the best Banjo bolt I have ever seen. View detail
Buy Stainless bolt for High spec line!
I bought Goodridge size stainless bolt for Banjo bolt because it is DAYTONA high spec line.
It's a standard product with no mistakes, so you can use it with confidence.
View detail
exchange
I bought this to install brembo radial brake master cylinder.
I chose Stainless black to match the color of the brake hose, which is black.
It's subtle that the silver packing stands out against the black, but it can't be helped.
View detail
Brake
I bought this one in response to brembo.
I wanted the Stainless Steel Black, but they don't seem to have it.
Material:Since it is Aluminum, I am a little worried about the Screw mountain with repeated use.
View detail
It would be better if the length of the Bolt was also mentioned.
I bought this to install on my brembo rear caliper.
Pitch of brembo is 1.0mm, Hose and Fitting is the same swage, but when you install it, it may be bottomed out Limit, so you may need to adjust it with Washer.
View detail
It's angled.
It's not Straight Type. It is angled. It seems to be able to be used when you want to change the handling. View detail
It's a bit expensive
I think the price is a bit high, but I have no special complaints. View detail
Be careful not to overtighten.
The Material is Material, so be careful not to overtighten.
I've done it myself.
I was lucky enough to get it at Single Body.
View detail