Reviews
Cheap, strong, rustproof
This is the same Parts that helped me when I was riding WR250.
By the way, I'm haGap from checking WeBig's compatibility, but CRF250L M RALLY50 MD44 will also fit, 44-47mm will fit, I will let you know.
I purchased this product in conjunction with the purchase of YOSHIMURAExhaust pipe.
As expected, the OEM exhaust clamp was rusty and rusty when removed.
Bolt broke.
I bought it on Amazon Prime, so I placed the order in the afternoon and it arrived first thing the next morning!
View detail
DIYParts
It was a big help that we were able to get a large number of parts for modification, not just dedicated parts for that particular car model. View detail
Fits: KAWASAKI D tracker, KAWASAKI D-TRACKER-X, SUZUKI DR250R, KAWASAKI KLX250
Texture.
Great texture.
I think it's hard to install if you don't have any experience.
View detail
42.7mmPipe Clamp
I purchased this product to make an exhaust system for my YamahaXV750E.
42.It is used for Clamp when assembling 7mm Exhaust pipe.
The actual Pipe outer diameter is 45mm since it is used on the assembly side.
It is a very ordinary Stainless Steel Exhaust Band, but I chose it because of its claim that it is SUS316, which is more corrosion resistant than the common SUS304.
I would expect high corrosion resistance, as OEM exhaust bands on older motorcycles often stick or decay due to rust.
It would be great if you could keep it clean to look at since the Band will be in a position where it can be seen from the outside.
View detail
Necessary and sufficient. Pay attention to screw specifications
I tightened it at 50Nm with no problem.
Deep socket is required because the screw is longer than OEM Product.
(15mm is recommended for 5/8inch because it has a large rattling.)
View detail
It doesn't tighten up … at all …;
Whether it is an individual difference or the accuracy of the product, the body is not fixed at all even if the bolt is tightened to the limit.
Really disappointed…;
View detail
muffler pipe clamp
Bought 2. I broke the original FMF muffler clamp as it rusted, this clamp did not rust and holds perfectly as it should Perfect for securing a secure seal between the muffler and the header pipe. Much better than typical hose clamps. I strongly recommend. View detail
Itchy Items
Due to a worsening cervical hernia, I was unable to ride a motorcycle for about a year and had to dispose of all my motorcycles and equipment except for a scooter for commuting. However, thanks to hellish training and treatment, I have finally recovered to a certain extent. My wife gave me a 1997 klx250es as a present.
It was a good used car that had been used for a while, but the promised OEM exhaust pipe heat guard was completely lost from the welding point where it was fixed, a Kawasaki phenomenon. Of course, I bought it together with the OEM heat guard from Webig.
It is good. Thanks to Manufacturer's attitude to sell such Pinpoint Parts at a low price.
View detail
No Color, comparable to OEM, and good cost performance.
I chose this product because of the price, but I was worried about the appearance and fit, but it looks and feels perfectly fine. The price is very reasonable. I am glad I chose this product. View detail
Universal and high quality
To make the 2007 WR250X a Course-only vehicle, we equipped it with the North American OEM GYTRExhaust system and DeltaTorque head pipe.
I chose this one to fit the DeltaTorque head pipe with the WR250XOEMHeat Guard.
It is cheap and high quality.
View detail
Perfect for DeltaTorqueHead
I used DeltaTorque head pipe and usYOSHIMURARS2 on my WR250X. I was worried about the heat of the exhaust pipe, so I chose this pipe for protection. Thanks to this, both zCarbon's Heat Guard and WR250X OEM Exhaust Pipe Guard can be installed.
Our 2007 WR250X will soon have its exhaust changed to Large width! (Now with YOSHIMURARS4J and OEM Exhaust pipe) I'll do it. (Combination of North American OEM GYTRSilencer and DeltaTorque head pipe) I would like to buy another one.
View detail
Inch size。
Be careful not to spread it too wide when you put it on, because the shape will be distorted. It may not be easy to handle ^^^. View detail
Exhaust Clamp
The Bolt does not fit any Size of Socket, I used MONKEY Wrench, but it is hard to tighten with MONKEY Wrench. View detail
It is still good for accuracy and tightening to a perfect circle.
Yes, my Yoshimurars-4J is currently struggling with exhaust leaks, but I found out that the clamp on the mid pipe is not properly tightened to a perfect circle.
So my wife picked up a Barrel4 before. (Already disposed of) I bought this clamp to eliminate the cause of exhaust leak one by one because this clamp was very good when I installed
View detail
Material:It's Stainless Steel and it's beautiful. Great accuracy too.
For some reason, my wife picked up the lightest Barrel4 from somewhere and brought it home to use on her WR250X for course riding, but it didn't come with this clamp, so I bought it. The stainless steel is beautiful and the accuracy is good. I was able to install it safely. The only thing is that there is no Baffle like for Race before the regulation, so the sound is super explosive. Inner baffle is next. View detail
Tightly fixed
It can be installed without any problem. And it is fixed firmly. View detail
scarf band
First of all, the size fits so fantastically. Expensive but looks expensive. Once it is tightened, it stays in place without shaking and matches the Yamamoto muffler very well. The price is expensive, but it looks expensive and looks luxurious. The Yamamoto muffler looks cheap because it is too expensive It is expensive. First of all, I want to give it 5 stars because I am very satisfied I think it's the best in terms of quality It's really good, so you can think of it as the best in terms of quality --------------------------------------------- First, it seems expensive , expensive to size so fantastically well suited to tighten noteuni is well fixed without shaking Yamamoto goes so much better with scarf price is expensive, sensitive, but it seems looks turned luxury expensive as expensive expensive one seemed to look cheap because Yamamoto muffler jachae too expensive If you give 5 stars because it is too expensive, so first I want to meet people equipped to write another scarf, but we believe yippeul still expensive ... people who want to complete your order in a hurry because it takes time to wait to order the ne xt halgeot Do think twice Ideally superlative quality as mandeumsae is really good as you will also think the best thing about the job I a quality 4-5 hours after the order is necessary to make the wait so the best thing is you like it's too good to be the best thing Yamamoto Powered by Google Translator View detail
Two Brothers Barrel Clamp
I have repeatedly bought clamps from Two Brothers. I searched for them for a long time and found only at you. Extra strong clamps for the exhaust system. Thanks to you, I got them. I plan to buy more in the future. View detail
Compact and good!
It is used for the connection between the front pipe and the rear part of WR250X.
Stainless steel is resistant to rust, but the screw part is easily burned by heat, so it is recommended to apply an anti-carburizing agent such as Copper to the screw part before use.
View detail
Perfection as shown in the image
To install the DRC Exhaust Pipe Guard4Cycle to the RSV's 4 Strike Competition Exhaust Pipe (exhaust pipe), this Mount Kit has been purchased by Quantity:I used 2 sets.
important item
[Was there anything that disappointed you?
There was nothing in particular
Do you have any wishes or improvements you would like to make for the Manufacturer?
Couldn't it be a little cheaper?
[Do you have any products to compare it to?
We have not found any other similar products.
Frequently Asked Items
What made you decide to buy?
There is a method of attaching the Guard directly to the exhaust pipe, but the exhaust heat is transmitted to the Guard and it does not serve the purpose of heat shielding.
How was your experience with it?
As I intended, the exhaust heat from the exhaust pipe is not transferred to the Guard, so it is now hot enough that you can touch the Guard with your bare hands without getting burned.
Was the installation difficult?
Technically, there is nothing difficult to do, but because the clearance between the engine cylinder and the exhaust pipe is narrow, I had to use my head to decide the position of the band and the direction of the screw to attach the mount to the exhaust pipe.
【Please tell me the installation point and hang】
Guard is Material:Because it is aluminum, it can be bent to some extent, but extreme bending is not possible, so it is necessary to decide the position of the Mount so that the Guard will fit the shape of the exhaust pipe well.
[Was the Instruction Manual easy to understand?
The instruction manual is not included, which makes it even more important to have the proper knowledge, skills and tools is required
[Included Parts:were they on?
This is the only item in the photo, there were no other included parts.
View detail