Reviews
I think that it is the seen slimest design. Since the tail lamp had also attached DRC, it is equipped finely. Mind made it orange ? at a little time of lighting. Since XR100 motard has only an AC generation [Alternating Current], it is necessa
I think that it is the seen slimest design.
Since the tail lamp had also attached DRC, it is equipped finely.
Mind made it orange ? at a little time of lighting.
Since XR100 motard has only an AC generation [Alternating Current], it is necessary to make a DC power supply [a direct current] from battery kit - or its original work by a battery-less kit, and to use an LED flasher unit [blinker relay].
Wiring was remade.
The place to remake is only a place of a normal blinker relay.
It is incredibly easy if it is used to the electric work of the motorcycle.
View detail
Fits: HONDA CRF50F, HONDA XR50R (for competition), HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA solo, HONDA monkey, HONDA monkey, HONDA Little Cub, HONDA Little Cub, HONDA MONKEY BAJA, HONDA BENLY50CD50, HONDA BENLY50S, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA DAX, HONDA CUB press 50, HONDA JAZZ
Since the crack went into the old type high cam, it replaced. It seems that some setting variations are performed. Idling came to be stabilized compared with the old type. Although it is used with 50 cc, it turns without a complaint to high ro
Since the crack went into the old type high cam, it replaced.
It seems that some setting variations are performed.
Idling came to be stabilized compared with the old type.
Although it is used with 50 cc, it turns without a complaint to high rotation.
It takes care, and if it does not run, 10,000 rotations will be exceeded comfortably.
I think that it can be covered enough with the sharpness of the rotation from the middle, and the thickness of torque although the torque in low rotation falls.
Also in the time of high rotation, only by merely turning, there is nothing and it turns forcibly.
I think that they are recommended goods.
View detail
Fits: Others , YAMAHA YZF1000 THUNDER ACE, SUZUKI DL1000 V-STROM650, SUZUKI DJEBEL250 XC, SUZUKI KATANA, SUZUKI B-KING, KTM 690 ENDURO, KAWASAKI NINJA400, KAWASAKI ZZR1100, KAWASAKI ZX14R, HONDA PS250, HONDA CB400SB, HONDA NC700X
It uses, when carrying out camping touring by a serow. It is in the state which extended both sides, and they are the compact tent for two for - mountains, a schlafsack, a mat stove, a gas cartridge, a lantern, tableware, and the touch that changes it
It uses, when carrying out camping touring by a serow.
It is in the state which extended both sides, and they are the compact tent for two for - mountains, a schlafsack, a mat stove, a gas cartridge, a lantern, tableware, and the touch that changes its clothes, puts in a rain jacket, protection-against-the-cold arrival, toilet articles, etc., and still has a little margins.
The pole for tents and the tripod of a camera are fastened to the outside strap.
It is stabilized only by putting on a rear carrier and fixing by four straps approximately.
Although the path through a wood was also then run, since it shifted, it did not become precocious.
The quite large rain cover which can be used even if a side is extended or it carries a load upwards is attached.
Since it will fly off shortly after running with a dowel dowel if it remains as it is, it is good in pressing down in a net etc. from a top.
Although the camping seat bag 2 of the already somewhat large company was also considered, if it is not a large-sized motorcycle, this size will think that it is good.
View detail
At the point which went out on the touring of the motorcycle, he thought that it was convenient to walk around with a digital camera, or valuables besides portal bull navigation, and it purchased. a size is good exactly -- it felt, it came out, and si
At the point which went out on the touring of the motorcycle, he thought that it was convenient to walk around with a digital camera, or valuables besides portal bull navigation, and it purchased.
a size is good exactly -- it felt, it came out, and since curved one was liking like [ thing / square ] semicircular shapes, it was made Colet.
The price and 3000 yen or less and a thing [ the thing ] are O.
Since there is a crevice like a photograph even if it puts in carrying, a digital camera case, and navigation (garmin nuvi250 Plus), accessories are also put into others.
If 500 ml of plastic bottles are turned sideways, you will use a depth half, but does it enter?
Since it is putting into the seat bag when having ridden on the motorcycle, it does not use actually, but since the thin pocket whose contents can be seen in a mesh is on this bag, I think convenient kana at the time of high-speed getting on and off.
Since a top pocket is a mesh, storage of the card in the place which requires water, etc. is dangerous.
Cost performance is also very high and it may also see a design synthetically [ functionality is also good and ] perfect.
View detail
It purchased for maintenance of a chain, etc. V receptacle type is used. Although one person can also hang a stand, when an emergency thing was considered and I had you help, I got it to be safer for other persons to support a motorcycle. I th
It purchased for maintenance of a chain, etc.
V receptacle type is used.
Although one person can also hang a stand, when an emergency thing was considered and I had you help, I got it to be safer for other persons to support a motorcycle.
I think that those who maintain by themselves have and there is no loss.
View detail
A securing pin is attached to a rear surface and corresponds to the necessity for a pin thinner than usual. When the holder of the other company could not be used for the honda pure pulley, it read and chose, but the pin thin just like that was helpfu
A securing pin is attached to a rear surface and corresponds to the necessity for a pin thinner than usual.
When the holder of the other company could not be used for the honda pure pulley, it read and chose, but the pin thin just like that was helpful.
The type pressed down from the circumference of a pulley is clearly excelled in rationality (ease of use and stability).
It was able to use also for the clutch cover (it is a hole to a transverse plane).
View detail
Odax: ODAX integrate taillight Purchase. It stuck under the tail light as a number LGT. The brightness of LED came out enough and visibility and appearance became good from the pure tail lamp and number LGT with a white light. With double-stic
Odax: ODAX integrate taillight Purchase.
It stuck under the tail light as a number LGT.
The brightness of LED came out enough and visibility and appearance became good from the pure tail lamp and number LGT with a white light.
With double-stick tape, attachment is easy and, for the moment, has adhered satisfactorily.
View detail
It is the highest. It is preeminent for the wind protection effect. (with [ although 180 K was taken out ] no uneasiness) A style is the highest above all. Although the position lamp also wired, along with a position headlight, it is considera
It is the highest.
It is preeminent for the wind protection effect.
(with [ although 180 K was taken out ] no uneasiness) A style is the highest above all.
Although the position lamp also wired, along with a position headlight, it is considerably conspicuous perpendicularly.
Moreover, paint application is also beautiful.
View detail
It is used at the time of an oil change. It is exchanging each time for oil leakage prevention. HORNET250 is phi 14 use. Incidentally a drain bolt is M14xP1.5.
It is used at the time of an oil change.
It is exchanging each time for oil leakage prevention.
HORNET250 is phi 14 use.
Incidentally a drain bolt is M14xP1.5.
View detail
The management method of a helmet is considered and impression is seen to inside, and I hear that it can set on a tank, and it purchases and equips a handle with a wearing helmet. A brilliant success was carried out. Since it was hard to use an au
The management method of a helmet is considered and impression is seen to inside, and I hear that it can set on a tank, and it purchases and equips a handle with a wearing helmet.
A brilliant success was carried out.
Since it was hard to use an authentic positive one, it is very satisfactory.
Attachment is also easy! It is a five stars.
View detail
Fits: その他 For Brembo, その他 For Brembo
The bolt for radial mount calipers is a bolt of long size. A size called M10x70 (pitch: 1.25) is parts in which a replace article is also very new. Brando who releases such rare parts does by three companies accepting it, and does not borrow.
The bolt for radial mount calipers is a bolt of long size.
A size called M10x70 (pitch: 1.25) is parts in which a replace article is also very new.
Brando who releases such rare parts does by three companies accepting it, and does not borrow.
From a tachyon to two kinds
From beta titanium to four kinds
From bright logic to one kind
I will describe each price as above-mentioned Brando's details [ of M10x70 ] of a bolt below.
12 mm of 7-mm [ of tachyon flange outside diameter phi16 mm and, and a bolt head / in height ] and tools wrench used : * 5,
780/1TF10070B:.
14 mm of 8-mm [ of flange outside diameter phi20 mm and, and a bolt head / in height ] and tools wrench used : 6,
860/1* beta titanium SC-10070 [TC-10070] : 8 mm of 10-mm [ of cap bolt [taper cap bolt] outside-diameter phi16 mm and, and a bolt head / in height ] and tools wrench stick used : 5,250/1HC-10070 :.
5,775/1* bright-logic M10-70: used 12 mm of 8-mm [ of flange outside diameter phi16 mm and, and a bolt head / in height ] and tools wrench: -- used 12 mm of 5,775/1HX-10070:9-mm [ of flange outside diameter phi19 mm and, and a bolt head / in height ] and tools wrench: --
Tool [ 8 mm in height of flange outside diameter phi16 mm and, and a bolt head, and ] 12 point a 12 mm wrench used: Flange 12 angle bolt of 5,565/1 bright logic!! If a radial mount caliper bolt is chosen,
the product made from bright logic -- the maximum -- or [ being leading / ? ] most absorbed [ among the above-mentioned model ] very earnestly -- building -- !! -- merely -- a thing -- ~ -- it will not be -- effective modeling of which !! boasts is frightful.
(1): Bolt Head of 12 Angles Tends to Impose Strong Torque!! (2) : 12 Angle Bolt,
It becomes the theft prevention of parts!! (3) : KATACHI whose height of a bolt head is 8 mm by flange outside diameter phi16mm like HC-10070 of beta titanium,
Form suitable for calling it a compact flange 12 angle bolt!! (4) : by drilled processing,
racing spec which has the further weight saving and wire lock function!! (5): -- the seven above-mentioned kinds of inside, and a price -- the bottom to the second cheapness -- charm -- enough!! (6): -- in fact, the titanium-alloy bolt made from bright logic is a product made from beta titanium!!
View detail
It attached to KSR110 by itself. I think that it can work in comfort if there is a torque wrench since an aluminum banjo breaks easily. Those who cannot do air-bleeding need to leave it to a pro. Although other manufacturers have some which ar
It attached to KSR110 by itself.
I think that it can work in comfort if there is a torque wrench since an aluminum banjo breaks easily.
Those who cannot do air-bleeding need to leave it to a pro.
Although other manufacturers have some which are not attached, since protective tubing ? is attached, the portion where the object for KSR110 of a plot breaks a guide like normal can be used in comfort.
A touch also makes a normal caliper a snap considerably.
Those who desire more than this think that there is only exchange of a master etc.
Since a fault is not found at present, they are five stars.
View detail
2006 Equip KSR110. since cfc TOSASU is soft vehicles from the first -- an effect -- like -- the touch became good ... and quite satisfactory seal Rika -- measure -- appearance -- GOOD
2006 Equip KSR110.
since cfc TOSASU is soft vehicles from the first -- an effect -- like -- the touch became good ... and quite satisfactory seal Rika -- measure -- appearance -- GOOD
View detail
It was good, and interference attached other parts few and the color was also easy. It is curving, he is smart and reinforcement is also splendid. I had you help repeatedly. If a cover is also attached, he will repent that it was better. (
It was good, and interference attached other parts few and the color was also easy.
It is curving, he is smart and reinforcement is also splendid.
I had you help repeatedly.
If a cover is also attached, he will repent that it was better.
(A defiant attitude is assumed with whether it is good now)
View detail
2006 Cling to KSR110. Since it was as whether there are any goods raised upwards without shifting a step position back since the step was sometimes called GARITSU! also in the run of an urban area several times when he noticed, and a request of the pl
2006 Cling to KSR110.
Since it was as whether there are any goods raised upwards without shifting a step position back since the step was sometimes called GARITSU! also in the run of an urban area several times when he noticed, and a request of the place and the it who searched, it purchased and attached.
Although height is changed into three steps, I am using it in the location of middle.
Since the knee is narrow if it is the top truly.
It is whether although a high grade feeling also comes out compared with the step of normal, what it is easy to slide on on a rainy day is a fault,
View detail
The slider was attached. Attachment is not so difficult although it is troublesome to remove a cowl. Since the appearance does not need to process a cowl, it is very good. When it could do, before GOKE [ stood and ], it attaches and swarmed ..
The slider was attached.
Attachment is not so difficult although it is troublesome to remove a cowl.
Since the appearance does not need to process a cowl, it is very good.
When it could do, before GOKE [ stood and ], it attaches and swarmed ...
View detail
It attached to the sportster for 1200 s. Since cartridge Faulk is difficult to exchange, those diffident consider that it is better to leave it to a pro. Although it is important impression, it is good without a complaint. it pushed with the F
It attached to the sportster for 1200 s.
Since cartridge Faulk is difficult to exchange, those diffident consider that it is better to leave it to a pro.
Although it is important impression, it is good without a complaint.
it pushed with the Faulk simple substance -- feeling -- coming out -- although too soft kana ? was thought, if it rides, at back, it will be told to often moving that it straddles -- it was just disguised as Faulk of the ideal.
Those dissatisfied with the normal fork of a harley existing would like you to try by all means.
View detail
Since the circumference of rear one was changed, and a pure reflector would be removed, the slim reflector kit of the daytona was attached. Although other manufacturers' goods were also examined, since there was nothing with a not much sufficient pare
Since the circumference of rear one was changed, and a pure reflector would be removed, the slim reflector kit of the daytona was attached.
Although other manufacturers' goods were also examined, since there was nothing with a not much sufficient parenthesis, each was made this product only by square things.
Attachment is also easy! Structure is also solid.
RIA is smartly tightened as seen.
They are recommended goods.
View detail
2006 KSR110 is equipped. Especially if an instruction manual is seen about attachment, it is satisfactory and there is also no processing by the side of vehicles. Usually, although it is used for commuting which stacks rear BOX, it can be used, wi
2006 KSR110 is equipped.
Especially if an instruction manual is seen about attachment, it is satisfactory and there is also no processing by the side of vehicles.
Usually, although it is used for commuting which stacks rear BOX, it can be used, without breaking.
In the case of the vehicles equipped with an external fender less kit, since there is also a thing which cannot carry out simultaneous wearing, special attention is required.
View detail
Fits: SUZUKI LETS 98〈AS50W〉 (*Compatible with Frame No.:CA1KA-308837-), SUZUKI ZZ, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI Address50, SUZUKI Address50, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI VERDE, SUZUKI VERDE
The last type let's 2 and CA1PA were equipped. Since the chamber something was also exchanged simultaneously, it became the feeling around which it turns pleasantly to high rotation. Then, although returned to normal setting, if CDI is also made i
The last type let's 2 and CA1PA were equipped.
Since the chamber something was also exchanged simultaneously, it became the feeling around which it turns pleasantly to high rotation.
Then, although returned to normal setting, if CDI is also made into normal, a little unsatisfactory touch. -- I think whether it contributed to torque UP of an inside low speed, and response UP somewhat.
It is a recommend although a price is there [ there ].
Furthermore, does the direction which carries out a tune to KARIKKARI have that [ there ] good, since there is also Kami's grade?
Since it was only a turbo filter, a high speed pulley, chamber exchange, CDI exchange, and carburetor setting in the case of, the blue box was enough.
It is about MAX75 km/h.
Although setting had not come out at all --
It still turns this much and it may be special mention that is extended.
WR -- carburetor setting is deep, if it is made light and high rotation is lengthened -- it is safe if it sees.
View detail