Reviews
[Buying motive] The balance of the air-intake and flue ventilation of what changed the muffler into the racing silencer of pro skill, and carried out vehicle performance up by -KLX250 ('07) is bad, and it has become a motorcycle liable to a fogging anyhow
[Buying motive] The balance of the air-intake and flue ventilation of what changed the muffler into the racing silencer of pro skill, and carried out vehicle performance up by -KLX250 ('07) is bad, and it has become a motorcycle liable to a fogging anyhow with an engine failure, a knocking, an engine explosion omission, and afterburner frequent occurrence.
- Although it has improved in general by A.I. Artificial Intelligence cut, since incomplete combustion was carried out still more when there was no rotational frequency bubble, management was tried in the combination of the torque master of a hot wire and an exclusive plug.
[Tool preparation-, pure removal, and book product attachment] Detailed printing is carried out in play by the side of - NOLOGY hot wire.
[Effect of this product and the NOLOGY hot wire] Though fake kana was thought, expectation was put and purchased at the - beginning.
- However, how is it? It is different from [ before making a test run after attachment ] to the sound of a muffler.
(It becomes [ whether combustion within a cylinder is good, and ] somewhat quiet) - if it runs, old problems (a knocking in case rotational frequency does not suit, the engine failure at the time of start up, an afterburner, etc.) will be solved nearly markedly awfully thoroughly.
- If it says in detail, it will be felt to a run the time of vacating a throttle, and at large that the fuel [ many (all ?) ] has combusted completely completely compared with a pure plug and a plug cord.
It is a psycho.
[Rumor] By exchange of only - hot wire, if a plug is still pure, it has quite a many rumors called [ spark / intense ] breakage (a hole opens) in not only the electrode of a plug but a cylinder, and a cylinder.
We recommend you exchange simultaneous with a torque master.
[grading of goods] - this is serious -- it is great! Fuel consumption also becomes good, and since that is right, it is 5*.
(Being in play [ of a hot wire ] about a required tool and clearing work!)
View detail
A rear axle is made to carry out shaft penetration, and a motorcycle and a stand can maintain the state where it always stuck. So, since a ground surface can certainly be contacted by three points of two rollers, a rear tire and a stand, when making v
A rear axle is made to carry out shaft penetration, and a motorcycle and a stand can maintain the state where it always stuck.
So, since a ground surface can certainly be contacted by three points of two rollers, a rear tire and a stand, when making vertical the motorcycle in front of lift up, a tail cowl can be held with both hands and there is sense of stability very.
Moreover, lift up is also light and it can simplify it on one leg.
Since the lift of the motorcycle can be carried out safely anyhow, in beginners, it is recommendation absolutely!
View detail
Although the the lift stands of the company were used before, it was shaky, and since it was unstable although left by OH of suspension, etc. over a long period of time, and I was fearful to it, he bought it in the lift stands. It may be very stable.
Although the the lift stands of the company were used before, it was shaky, and since it was unstable although left by OH of suspension, etc. over a long period of time, and I was fearful to it, he bought it in the lift stands.
It may be very stable.
Since it is with a panel, he carries out a sticker tune by himself, and is enjoying himself.
It has put, and if it is completely like a works machine, it would consider by itself and will be self-satisfied.
View detail
Although the bolt was bound tight suitably until now, if this is used, torque management can be performed firmly and positive work can be performed.
Although the bolt was bound tight suitably until now, if this is used, torque management can be performed firmly and positive work can be performed. View detail
Since the nozzle of the carrying can used for about ten years had become useless, it purchased. It comes out, respectively, and it is scattering, it is a problem that a nozzle cannot respond in a general-purpose article, either, and opening of a carry
Since the nozzle of the carrying can used for about ten years had become useless, it purchased.
It comes out, respectively, and it is scattering, it is a problem that a nozzle cannot respond in a general-purpose article, either, and opening of a carrying can is a thing.
Therefore, although the carrying cans itself are two stars at the point that opening is not unified, it is five stars arranging such things perfectly and placing them about a nozzle.
(Does it praise too much just for a moment?)
View detail
I am sorry only for [ since a photograph was not able to be taken well ] a text. Since it had got bored with a black painting muffler authentic positive in an ape, when the silver muffler became wanting and it searched in Webike, since these goods of
I am sorry only for [ since a photograph was not able to be taken well ] a text.
Since it had got bored with a black painting muffler authentic positive in an ape, when the silver muffler became wanting and it searched in Webike, since these goods of the pleasing design (down type) were found at a handy price which is below 20000 yen, he bought it instantly.
Gasket attachment is user-friendly.
as for attachment, he can also do it and it meets -- although it came out and carried out, I had you do by Schopp in consideration of a safe side
Although it is used with the standard baffle attached with which it was equipped at the time of purchase, sufficient sound volume and lower tone quality can be enjoyed.
I think whether if the thing of the warm-up of winter, etc. are considered to me of the apartment home of a residential area, that kind of sound volume is a limit.
When going on a trip, I would like to remove a baffle and to enjoy sound.
The sound which cannot consider is the highest in 100 cc called BOBOBOBOBO --.
I think that it is the good product excellent in cost effectiveness.
View detail
A price, quality, and a supply situation could be stabilized very much, and as a back caliper, since the cover range is also wide, it has turned into the usual time-tested product. Moreover, since a dimensional drawing is also easily obtained from on
A price, quality, and a supply situation could be stabilized very much, and as a back caliper, since the cover range is also wide, it has turned into the usual time-tested product.
Moreover, since a dimensional drawing is also easily obtained from on a net, creation of support and the place which seldom suffers troubles think a good place.
View detail
![Windshield [Double Bubble]](https://global.webike-cdn.net/photo/article/02/1227096872002L.jpg)
Excelling in aerodynamics compared with the standard screen, since the silhouette of a car body is not broken down, it is recommended. Moreover, since the color of a motorcycle calls it Black, smoked color tightens the circumference of a front. Ca
Excelling in aerodynamics compared with the standard screen, since the silhouette of a car body is not broken down, it is recommended.
Moreover, since the color of a motorcycle calls it Black, smoked color tightens the circumference of a front.
Care and cleaning also thinks that it is easy and it is a screen excellent in cost performance.
View detail
It is what exactly at this product and the eliminator with which I ride in fact. Information was taught by Club of certain ERIMI. Even the screw could be used like looking and it was exactly. Although a peculiar part is what very well very muc
It is what exactly at this product and the eliminator with which I ride in fact.
Information was taught by Club of certain ERIMI.
Even the screw could be used like looking and it was exactly.
Although a peculiar part is what very well very much extremely small about whether an eliminator is an unpopular vehicle (a smile and a parenthesis are good), I think that it is good shopping since a side bag is attached now.
Although I hope that DS owner is seen in case of original, please pardon by calling it charms.
Since it was dramatically kind, it will be made five stars.
View detail
Paint application is so beautiful that he thinks whether it is pure as usual. I think that it is the result of conviction although it is quite more expensive in a cooley color. The run by 80 km or more became fairly easy. It matches well more
Paint application is so beautiful that he thinks whether it is pure as usual.
I think that it is the result of conviction although it is quite more expensive in a cooley color.
The run by 80 km or more became fairly easy.
It matches well more sharply [ appearance ] than the cowl currently attached to type S, and well.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
Since it is a product made from aluminum, compared with the product of the other company, it is a little heavy, but the part reinforcement has sense of security. Attachment is also easy at an exclusive design. A price is also cheap and perfect for
Since it is a product made from aluminum, compared with the product of the other company, it is a little heavy, but the part reinforcement has sense of security.
Attachment is also easy at an exclusive design.
A price is also cheap and perfect for the tail cowl in which looks are also felt refreshed and CB leaped up.
View detail
It is used when arranging KSR-2 of the founder of direct cab specifications. Since it uses with a clip, adding a plug cord, I will have demounted the main part, if the way of attaching which fastens to a bar pad is adopted and setting comes out. T
It is used when arranging KSR-2 of the founder of direct cab specifications.
Since it uses with a clip, adding a plug cord, I will have demounted the main part, if the way of attaching which fastens to a bar pad is adopted and setting comes out.
That threw into the crevice between bags and were carrying around since setting was needed also at the time of long touring, but it is not bulky is 笙ｪ which is a good point.
View detail
It has equipped with smoke with the LED flasher. Day and night are satisfactory to visibility. Attachment and wiring are also easy and are attached immediately. Lighting of night is dramatically smart. The light of a stop-lamp is very stro
It has equipped with smoke with the LED flasher.
Day and night are satisfactory to visibility.
Attachment and wiring are also easy and are attached immediately.
Lighting of night is dramatically smart.
The light of a stop-lamp is very strong and safety and looks are large satisfaction in UP.
View detail
It purchased in order to equip with the spring (size, doubleness configuration of smallness) of a center stand. I think that aside from small Ho the tension of the large spring was not odd and it was not able to substitute a driver etc. for it. Al
It purchased in order to equip with the spring (size, doubleness configuration of smallness) of a center stand.
I think that aside from small Ho the tension of the large spring was not odd and it was not able to substitute a driver etc. for it.
Also in order to avoid an unexpected injury, he buys it and it is a disadvantage specialized tool which is not.
View detail
![[Short Lever] Brake Master Cylinder Kit [Horizontal Type 11mm / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/43337_TS.jpg)
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
A color separates or the master cylinder which was being used rusts. -- Since it was the exchange time ?, it exchanged for the different body master. Appearance is quite good and its brake touch is also good. Positioning of a lever is also useful.
A color separates or the master cylinder which was being used rusts. -- Since it was the exchange time ?, it exchanged for the different body master.
Appearance is quite good and its brake touch is also good.
Positioning of a lever is also useful.
View detail
The running wind received with the whole body until now came to flow into the upper one from the shoulder, and the wind pressure at the time of high speed operation decreased sharply. The reinforcement of the screen is also solid, and it is considerab
The running wind received with the whole body until now came to flow into the upper one from the shoulder, and the wind pressure at the time of high speed operation decreased sharply.
The reinforcement of the screen is also solid, and it is considerably satisfied, without shifting at the time of a run.
Attachment was also able to be alone simplified only with the hezagonal wrench.
View detail
Since the motard bike and the off-road motorcycle heard that a number plate breaks in vibration. It opted for introduction of the aluminum license plate holder. The color was also on the car body and there was worth put in since it led also to sag
Since the motard bike and the off-road motorcycle heard that a number plate breaks in vibration.
It opted for introduction of the aluminum license plate holder.
The color was also on the car body and there was worth put in since it led also to sag prevention of the number.
View detail
Attachment was only 1 hour and 30 minutes. The construction description also had a statement in detail from one bolt nut, and there were also many photographs and they were saved. Isn't that was unclear at the time of attachment diverting the rubb
Attachment was only 1 hour and 30 minutes.
The construction description also had a statement in detail from one bolt nut, and there were also many photographs and they were saved.
Isn't that was unclear at the time of attachment diverting the rubber bush for rear blinkers?
The fender of normal is lost, the circumference of rear ones feels it refreshed, and becomes smart, and after attachment is pleased with it.
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
It attached to W400. attachment is troublesome -- although there was an opinion with !, the raw material finished with about 5 minutes, and attachment was softly simple for it.
It attached to W400.
attachment is troublesome -- although there was an opinion with !, the raw material finished with about 5 minutes, and attachment was softly simple for it.
View detail
It attached to E52 attached to TMAX. Since simultaneous wearing of the pure backrest for Europe and E52 was not able to be carried out, it adopted. A passenger's sense of security is completely different. It is reliable even if he is sleeping
It attached to E52 attached to TMAX.
Since simultaneous wearing of the pure backrest for Europe and E52 was not able to be carried out, it adopted.
A passenger's sense of security is completely different.
It is reliable even if he is sleeping behind.
(Smile) It is in notes of an article introduction. when you attach to a car with * high-mount stoplight, please do not carry out lamp wiring of a case.
it conflicts with the safety standard. -- it is a mystery.
View detail