Reviews
![[Aebs] Bead Scraper Which Does Not Hurt Wheel](https://img.webike-cdn.net/catalogue/19270/06191845_51c17dd1b7dae_TS.jpg)
It takes patience.
After about 2 laps, there will be a little gap between the rim and the tire, so you can insert the tire lever and pry it out. View detail
It was simultaneous purchase with an MDF rim stripe. If this gauge is used, it can stick really simply and finely. I thought that what is necessary was just to use a rim stripe and a set since it is not high.
It was simultaneous purchase with an MDF rim stripe.
If this gauge is used, it can stick really simply and finely.
I thought that what is necessary was just to use a rim stripe and a set since it is not high.
View detail
Fits: Others , その他
Can be used without problems
There were comments that the Light was dark and difficult to see, but it worked fine for outdoor work during the daytime. View detail
Works great for washing narrow crevices!
[How is it used?
This cylindrical Car Wash Brush is useful for washing narrow crevices when washing a car.
Was the one you received as per Image?
The total length was longer than I expected.
Considering my carrying and storage situation, another 5 cm shorter would have been perfect.
How was your experience with it?
I forget the Manufacturer, but the diameter of the Brush is thinner than the similar product I used to use, making it easier to insert the Brush into more detailed areas.
Brush's hair is quite firm.
I don't think anyone uses it, but it should not be used on Tanks, Screens, or other areas where fine scratches caused by car wash are a concern.
As the product name says "Engine brush", it is designed to be used on areas that do not get scratched or bothered by washing.
I use it in places that are difficult to wash with Sponge or regular Brush, such as the gap between engines, the gap between spokes, and the gap between exhaust pipes.
It was a pleasant realization that not only can hard-to-wash areas be cleaned, but it is also much more efficient than washing with Dustcloth, etc., so the time spent washing the car can be reduced.
As shown in the product image, the needle Gold of the core can also be bent gnarly.
The needle Gold in the core is quite hard, so it can be washed well even when bent.
[Points to note]
Rubber cap is attached to the tip of the Gold needle, which is the core of Brush.
In the unlikely event that this is not noticed coming off, it is likely to cause serious damage to the vehicle body.
Does it have a rubber cap?" and it is safer to look at it from time to time (a similar product I used in the past had a rubber cap that came off).
*Parts that cannot be used
It cannot be used for areas that must be bent internally, such as the inside of a Handlebar Pipe.
As mentioned above, the core needle Gold bends, but it is quite stiff. It does not bend flexibly to fit the other side while inserting it into a gap.
View detail
Convenient for bore upetc. engine tuning!
It is useful when replacing the Gasket during engine tuning such as bore up, clutch replacement, oil cooler installation, etc.!
Old gaskets stick to the surface and are difficult to remove, so a cutter blade or similar tool is used to remove the gasket, but a scraper is more beautiful and quicker for detailed work.
The price is not so expensive, so it would be good to have one in the family.
View detail
Convenient to have
I bought this because the Cowl claw on my CT125 is hard.
It is very different without it.
I was able to remove the hard nails without breaking them.
View detail
Heat resistant and easy to use!
We used it for Joint protection of SensorWiring near the Engine, where normal Vinyl Tape would melt due to heat.
It is not sticky like regular Vinyl Tape and is smooth and easy to use.
I didn't know this product existed until now, but now it is really useful.
View detail
DAYTONA Syringe Kit
About quality and texture - Top quality. The syringe has a durable plastic housing that can be reused many times even when exposed to brake fluid. About the feeling of use - When removing and adding brake fluid from the master cylinder I like to minimise the chance of brake fluid being spilt on my paint work and this syringe and hose kit suits my needs perfectly. Products to buy together - The brake air bleed set from Daytona is perfect to purchase together with this syringe kit so all your brake bleed needs are covered. Difficulty of installation - The syringe kit is easy to assemble from the included items and even easier to use to extract and inject whatever fluid is needed. Cost performance and comparison with other products - With the inclusion of the hose and zip tie I find the syringe kit good value for a product that can be reused multiple times and comparing to the other kits available here on Webike, it's also the best value. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - The included hose is only 15 cm long, so depending in your intended use it might also be worth adding some additional hose to your order. View detail
Comes off easily.
I used it to remove a sticking Hose.
The Hose can be easily removed without much effort.
It is slightly thicker at the tip, so it would be easier to use if it were thinner.
View detail
It is easy to use
High performance and easy-to-use product.
Just set the wire diameter and thickness, and it automatically adjusts the current, so even an inexperienced person can get by with the specifications.
I think this is the best 100v welder to choose.
View detail
Easy to use
Its high heat resistance makes it ideal for HarnessWiring treatment around the Engine.
Excellent and easy to use as an insulated Tape.
Vinyl does not harden under heat and is very easy to use with little sticky glue when peeled off.
View detail
I use it for Wiring Binding by Engine
I use this product for Wiring Binding of Engine Soba, it is just as it says in the Package, it does not melt in heat and it is durable! View detail
Items essential to remove the Cowl!
I think this product is an essential item for cowl removal. The resin also prevents the cowl from getting wound, and it is also useful for removing the interior of the car! View detail
Convenient
Very useful for applying Rim tape.
The time required for pasting can be reduced to a Large width, and the tape is finished neatly without gapping.
It is convenient to purchase at the same time as Rim tape.
View detail
Convenient
Magnet is powerful enough to efficiently pick up tools and parts dropped in tight spaces.
The handle is easy to hold, flexible, and easy to use.
View detail
Easy to stick
It will be very easy to apply Rim sticker.
The position of the paste is also well defined.
Recommendation
View detail
Expensive, but expensive tools
Not of the genus Gold, Ceramic scraper.
It is impossible to replace the tip of the blade, etc.
I use it to remove rust from BrakePiston and it is very comfortable to use.
Once you use this, you will not want to use the Scraper with the Gold Genus blade very often.
It is an expensive product, but only expensive.
View detail
Convenient for details
Cotton swabs are weak and break easily, but this product is firm and does not break.
It is suitable for cleaning small areas such as gaps between the fins of the Engine Cylinder.
View detail
Easy to use
Brush can be used with hose connected, so dirt can be removed while flushing with water.
It is useful for removing dirt from Wheel and is effective for heavily soiled areas.
View detail
Easy to use
The hardness of the Brush is just right and is useful for cleaning aluminum wheels, etc.
It is scratch resistant and the Brush is just the right length to get into the crevices and scrape dirt out.
The wheel is easy to hold and polish, so wheel cleaning during car wash can be done efficiently.
View detail