Reviews
Usable as usual!
[How is it used?
I bought this for maintenance of my CD50, which is becoming an old car, because the screw holes and bolts are getting a little hard to turn due to rust.
Was the one you received as per Image?
It looks cheap, but it was my first tool, so it has the minimum functionalityQuantity:Set
How was your experience with it?
The case is a slide type, which is unexpectedly difficult to use, but the product itself is not bad and is still in this condition and durable even after several years of use. The functionality is also fine, and it is still in use.
[Points to note]
Please note that this product is for Steel, so Material:Cannot be used on Stainless Steel. It will ruin the tool.
How did it compare to other products?
This Quantity:Set is 20 piecesQuantity:It is a Set and Compact, but it is fully functional. Quantity in another company's product.:I was not sure about 1 Set of 40pcs. but I am glad I went with this one.
I feel like I can make original parts by molding the screw holes, etc., and I think I am going to get into it.
View detail
It is good to be able to do AlignmentCheck of Chain easily!
I used to check the alignment of a chain with a water thread, but I was too large, so I bought this one, which seems to be easy to check.
The product is applied to the Sprocket, and as long as the direction of the stick coming out of the Sprocket and the direction in which the Chain is running are parallel, the product is OK.
Screws to fix this to the Sprocket are also Material:Plastic has been taken care of so that Sprocket will not be damaged.
If I had my way, it would be even easier to see if it had a longer bar.
View detail
Definitely buy it.
I thought it was paper, but it is Plastic.
Mist spray and don't mind getting wet.
If you want to put a Rim sticker on it, definitely buy it.
View detail
Aggressiveness to paint is plastic
I bought this to solve the Sticker hell that seems to be the end of the world.
Although it is a Stainless Scraper, it is not that aggressive to paint due to its tip shape.
I was able to remove Sticker quite well without chemicals.
It is by far easier to remove than plastic Scraper, but note that it is not as aggressive to paint.
View detail
Required for MotorcycleMaintenance
I have been using a slotted screwdriveretc. to muddy my brown, but I bought this to replace a set of seals on my Caliper. Finally, I can replace seals without damaging them here and there. View detail
War for Vehicle
MINIBrush, wash for Vehicle and the price was cheap so I bought it to try it out.
It helps that it can wash small areas and is inexpensive.
If it goes bad again, I would like to purchase Repeat.
View detail
Band of Exhaust System
Exhaust System band removal becomes easier. View detail
Also on Front fork
I couldn't get the YSS Fork Spring to push in by hand, so I tried using it on the Front fork. it press-fits up to the screw threads on the Inner Tube, and from there I could turn it by hand. There may be other uses for this spring. View detail
If you want to remove the Exhaust System, here it is.
It is very useful for removing the Exhaust System, Chamber, and Exhaust Manifold Spring. Before I bought this product, I had a hard time removing them with the radipen, but with this product, I was able to remove them in one shot. I wish I had bought it earlier!
The T-shaped handlebar is easy to grip.
Is the hook a little small?
View detail
Normal.
It is difficult to use by matching both sides to the groove.
I wish I could do well, but I'm not very comfortable.
It is safer and more comfortable to just remove it with your fingernail. -------------------------------------------------- -------- This is hard to use both sides to the groove. I hope you can do it well, but it's not comfortable. It's safer and more comfortable to use your nails. Powered by Google Translator
View detail
Versatile Tool for your Spark Plug Maintenance Needs
About quality and texture: I am happy with the quality of the spark plug gap tool from Lisle, made from a steel construction with the assembly secured with rivets. About the feeling of use: I have used this tool to correctly measure and adjust the gapping of my spark plugs quickly and accurately. The combination of the measurement wires and adjustment tabs makes this tool very versatile for spark plug maintenance needs. Products to buy together: Some more tooling like a tappet adjustment wrench would also be desirable to purchase along side the spark plug gap tool to simplify these processes when it comes time for your annual maintenance. Difficulty of installation: The process to install takes a few minutes, place the measurement wire between the center electrode and ground electrode to obtain the clearance and use the adjustment tab to open or close the gap by adjusting the ground electrode. Not difficult to do. Cost performance and comparison with other products: Good costing as this is a quality made spark plug gap tool from Lisle that has with stood numerous usage without failure and much quicker and easier to use and read then feeler guages. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Good for common sized gaps but may not be suitable for every situation unlike a set of feeler guages. View detail
For Overhaul of Suspension.
I purchased this tool for overhaul of my Motorcycle Suspension. The difference from other products is that it does not affect the spring of the suspension because it uses a string to shorten the spring. Other products are designed to hook a Bracket or Plastic Hook to the Spring, which may damage the Suspension depending on the type of Suspension.
It is more than twice the price, so it is more expensive in terms of cost.
View detail
Handlebaretc.Easy to cut
It takes a long time to cut with a thread saw etc., and it is not possible to cut cleanly, but it takes a really short time and finishes cleanly. View detail
I think it's cheap
Personally, I thought it was inexpensive.
It feels good to use, polishes properly, and is convenient to have.
I would buy it again.
View detail
Motorcycle with Cowl should buy it before you regret it!
I purchased this product (adjusting for shipping costs) for the installation of a car's drareco.
You can get by without it, but you can scratch it when removing the lining, and it is easier to remove the Clip, so you can do a more careful job if you have it.
Actually, I seem to have made a mistake when removing the Motorcycle Cowl, and there is a spot where I broke a nail before I knew it. I think it could have been prevented if I had used an inner lining remover properly.
By using the inner lining remover, it will be easier to apply force to the nail/Clip part, so I will use it from now on to prevent damage.
If you do not have one, we recommend that you purchase one, as it will come in handy in your tool box.
View detail
This tool is very convenient for the task
About quality and texture, I can confirm that the quality is good and that the material used is steel for the entire tool with a mixture of wire to measure the gap and plate to adjust the gap. About the feeling of use, I had previously used feeler guages to measure my spark plug gaps and a small flat blade screwdriver to open up the spark plug gap if required, this tool is very convenient for the task now. Products to buy together, Some new spark plugs from NGK preferably would be ideal to also add to your cart when purchasing this tool so you can have a strong spark from your fresh and correctly gapped spark plug. Difficulty of installation, I can say the fitment of the spark plug gap tool for my installation was very easy due to the simple nature of it's use caused by it's convenient and compact design. Cost performance and comparison with other products, The pricing of the spark plug gap tool is great. You receive a product with a design that makes checking and adjusting spark plug gaps easier then using feeler guages at a price that anyone can afford to add to their toolbox. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Dirt removal
I bought this to remove stuck-on dirt.
It is not that expensive and seems durable.
In the image, I imagined it to be a little smaller, but it was a little larger than I expected.
The Wooden Handlebar section is also easy to grip and use.
View detail
For cleaning
Quantity:1 Set of 3pcs. and the price is low, so you can use it without worrying.
The Plastic section is also easy to hold and has a nice elasticity.
It is cosmetically good, so it is enough if you can hold it at some level.
View detail
It is easy to use
I used it to wash Engine of SEROW250.
Until then, I had used Small Brushetc.
Brush like a hair on a needle Gold can get into tight places Smoothly.
It was very easy to wash.
View detail
One can be used for air bites, maybe.
Brake fluid is replaced and used to drain the fluid when air bites.
Once the Brake is inserted into the loop, it can be fastened with a special pin or tied with a needle gold so that it cannot be wiped off.
The front side of the tank is above the tank and gravity will cause it to fall down to a certain extent, but the rear side is almost parallel to the tank, so it is sometimes difficult to get out the tank.
It is a delicate item.
If it is completely air bitten and the Lever and Pedal are completely scoured, there will be no Fluid because there is no pushing force. This syringe type aspirate is not powerful enough.
At that time, if you can connect VacuumGoods or something, you can make it work, but if not, just take it to the shop. (Lol)
They did a full Route exchange at Red Baron for $3,160 for just the Rear. (Lol)
View detail