Reviews
An air pressure gauge is recommended.
I ordered an air pressure gauge to use on the circuit.
I usually use snap-on products. The price is very expensive and it is discontinued so it is difficult to find.
This product looks a lot like a snap-on.
When I actually used it on the circuit, it worked well and was easy to use.
The price is cheap and I recommend it. -------------------------------------------------- -------- I ordered an air pressure gauge to use on the circuit. I usually use snap-on products. The price is very expensive and it is discontinued so it is difficult to find. This product looks a lot like a snap-on. When I actually used it on the circuit, it worked well and was easy to use. The price is cheap and I recommend it. Powered by Google Translator
View detail
Size is also convenient to carry.
I take it with me when I go to the woods. It is lightweight and just right in terms of Size. I think the air pressure measurement is also accurate, which is important. View detail
Easier to grip
I used to use Emon's Air gauge, but when I put it away, I accidentally closed it without removing the Air gauge and the gauge stuck and would not return to Zero. View detail
Used for pre-ride inspection
I always use this guy before a long run to watch the voltage.
I have been stopped twice now for electrical abnormalities. I think it is much better than tolove it on the road. I have no problem using it, but the body is sticky.
View detail
Convenient to have
It can also measure depth, which is very useful to have.
The movement is a little stiff, but I think it is appropriate for the price.
View detail
Air Pressure Check can be SMART
I have been using a HoseType air gauge, but I thought it was too bulky for motorcycle use and a little too compact for touring use, so I purchased this compact gauge. Because it is light and compact, I don't have any trouble carrying it around. The quality of the product is commensurate with the price. I compared it with the one I already have, but there is quite a bit of difference. There are other Quantities:2pc. I have about Set, so this is a comparison with that, but other Quantities:2pc. Set has almost no error on both sides. This one shows about 30kpa lower. I don't mind it because I use it knowing the error, but I'm not sure if it's a good idea for someone who buys this for the first time. I think you can trust it if it is an expensive one, but if you are buying something this pricey for the first time, I recommend you to compare it with the PROSpec. in your store. The other thing to consider is how long it will last and its durability. It's not a bad product, and I think it's a good portable one for emergencies. The Valve is a Quantity.:Set is Good! View detail
For continuity checks
I purchased this to do a continuity check during Restore.
I usually use Tester, but with Tester I have to suppress both and my hands are full.
I have an Alligator Clip, but I bought this Inspection Tester because I thought it would help me do a lot of work.
If you clip one end to the Earth terminal, you can easily check for continuity, so it is quicker to find out what wire is what for each wiring.
The line is also long, so it is unlikely to be unreachable.
The good thing is that I have both 6V and 12V cars, so this one pc can provide both.
It is useful to have 1 pc for TroubleShoeing in Wiring.
View detail
Switching from Digital torque wrench
[How is it used?
I have been using KTC's Digital ratchet until now.
In use Alarm sounds when setting Torque is reached in Spec.
It is difficult to stop the tightening at the time of sounding but setting TorqueExactly to stop
If it's around 10N.m, it's not so much Over, but around 30N.m, it's up to the latter half of 31N.m.
The display goes and so on.
I'm not sure what's going on, so I'll stop at Mechanical's Cutting edge.
Buy MechanicalTorque wrench from Tonichi
Was the one you received as per Image?
as pictured
How was your experience with it?
The initial setup is a bit tedious.
I still feel more comfortable with Mechanical.
The easy-to-understand structure of the Torque, which can be locked with a click, is good.
There is just no visible N.m. indication, but it may be due to the degree of tightening.
I don't know, maybe it's Overtorque.
It's invisible, so it's good!
[Points to note]
So much so that I always drop the scale to at least Torque when I'm done using it and store it.
Digital ratchet is easier and hassle-free in this area.
How did it compare to other products?
Digital ratchet is a method of specifying the target Torque as a number and stopping it when it sounds.
Simple and easy to use for everyone, but the Spec.
Tightening multiple parts is difficult to do quickly.
The preliminary alarm sounds, and from there the main alarm sounds and reaches the set torque, but it takes a long time to close from the preliminary alarm to the main alarm while watching the situation slowly.
On the other hand, with Tonichi's MechanicalTorque wrench, it's just a click and you're done.
I can tighten them one after another.
Of course, if you tighten it with a lot of force or over the zone of idling after cutting, it will over, but if you do it normally, it can be tightened precisely.
I don't often use both Digital and Mechanical, but I'll probably end up using only Mechanical.
View detail
To use Point
I recently used it in a Tire replacement.
I was A little inquisitive as to whether this was the right way to use it.
View detail
Buy for Maintenance
The scale is colored for easy understanding.
It is used infrequently, but it is used for Large.
View detail
Purchased due to the appeal of the cosmetics.
First-class products are always better, but I thought that a measuring instrument of this price would be sufficient. It is more reliable than no management. There are many comparison videos on Youtube, and I found them to be very helpful. If you want to be absolutely particular about tools and equipment, I recommend you to buy a first-class product from the beginning because you will lose money by buying a cheap one. View detail
Fits: HARLEY-DAVIDSON Universal
Voltmeters for Motorcycle
Although not particularly necessary, a voltmeter was installed since it is also attached to the car.
White light is also provided, making it easy to see at night.
KITACO for mounting on Mount bar (KITACO) Meter clamp set Motorcycleetc. 672-1126900, etc. required.
Other items in the photo are KIJIMAHandlebar Mount Bracket, Eye PRO ShiftIndicatorAPH8 Red, SP Mukawa Φ48Small DN Tachometer 12500rpm (with Rev indicator)
View detail
Power management for old cars!
Purchased to manage power supply for old car!
I am impressed with the function-specific split, and I love the fact that I can visually determine the information I need!
View detail
I can't connect to the dedicated Site at all, so no.
If you don't improve Site, it will be useless. View detail
It is still a necessity for old motorcycles.
The vehicle is 30 years old, so I installed it to know the electrical system Trouble in advance.
This product is small in size, so there is no sense of discomfort even if it is installed in an easily visible place.
Wiring is also easy and practical.
View detail
Overall, KO!!!!
I am satisfied with the well made product, but I have old eyes and it is hard for me to see the memory.
Otherwise, it is OK.
View detail
Koso mini 3
The product matches the description, the product is not available in Vietnam so you have to wait for shipping from webike Japan at a quite high price. I tested it and it works perfectly. View detail
Not bad, but,
Not bad, but the lock part is sometimes subtle and difficult to use. View detail
Small Type
The DAYTONASmall Type Air Gauge is an easy-to-use product with good visibility. If I had not been concerned about the price, I would have chosen WITH HOSEKI. View detail
Torque management of Oil replacement
I used to have Dealer replace the oil, but I decided to purchase it to manage Torque so that I don't make mistakes when I turn it by hand.
The product has a solid weight and is easy to use.
I thought the Torque range could be used for Motorcycle maintenance.
Since I am a beginner, I thought it would be better to have a more detailed Instruction Manual on how to use the Torque wrench. I was wondering if you could give me more details on how to use the Torque wrench, such as how to adjust the Torque value after use, how to use it in a tight space, etc., since it says not to use a joint, etc.
I think the product itself is satisfactory for the price.
View detail