Reviews
Priced right and no damage to the adjuster.
Is a great tool to adjust the rear shock compared to using a screw driver and a hammer.It would have been extremely difficult and time consuming to preload springs without this tool.Recommend getting one to add to your collection.very handy tool, very good price.add;fits with exhaust clamps,triple tree nuts of old 50-250cc motorcycles View detail
Nothing too good, nothing too bad.
This tool is necessary for pre-road adjustment of shock absorber.
Universal tool.
The quality, the feel, the price, everything is normal.
View detail
Takegawa Lock Nut wrench for CT70
Package arrived quickly and safely from Webike! This tool is a must for anyone replacing the clutch on old Honda CT70s with semi automatic transmissions. This will fit 1/2 drive socket wrenches or cordless impact wrenches. Tool is very useful for my as i needed to replace my worn OEM Honda clutch with a Takegawa Clutch kit also from Webike. Thank you Webike! View detail
Fits: Others , HONDA GROM, HONDA MSX125, HONDA MONKEY125, HONDA SUPER CUB110, HONDA CROSSCUB110
I don't want it in jc92Clutch.
I don't use it to replace the Clutch on my jc92.
Clutch lock nut is 19mm.
View detail
Fits: Others , HONDA GROM, HONDA MSX125, HONDA MONKEY125, HONDA SUPER CUB110, HONDA CROSSCUB110
Not used for jc92Clutch work
Center nut of jc92 Clutch turns in a box of 19 View detail
Fits: HONDA PCX125, HONDA PCX125, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, HONDA Lead 90, HONDA Lead 100, HONDA Lead 50, HONDA Lead 90, HONDA Lead 100, HONDA Lead 50
Price is higher, but Socket is more secure
I purchased this product to integrate KOSO's PowerKit into my ADV150. The quality and functionality are perfectly acceptable, but I wish the price was lower; it is not Wallet-friendly to spend over 2000 yen for a dedicated product that is used only for the clutch lock nut. I think that as long as the functionality is solid, the finish could be rougher.
GlassesType Wrench is cheaper, but the clutch lock nut is only about 5mm thick even though the diameter is large. So I decided to go with Socket because of its high price and peace of mind.
View detail
no problem
[How is it used?
To remove the center nut of the clutch
Was the one you received as per Image?
Yes
How was your experience with it?
It can be used with no problem, but you have to apply it firmly and straight.
Easily slanted
[Points to note]
Centrifugal for Clutch Band holder required
It said not to use Impact.
I used Impact when loosening lol.
It is only used when ClutchRose is used, so it is not likely to be used anymore.
View detail
Fits: HONDA NSR50, HONDA GORILLA, HONDA MONKEY
Used for NSR50
Used for NSR50.
It works fine
View detail
Perfect tool when you only have a 3/8 torque wrench!
Worked like a charm for removing the oil spinner and clutch on my 2019 Monkey 125. I bought this because I only have a 3/8 drive torque wrench and almost all the other lock nut wrenches out there require a 1/2 driver. Would highly recomend if you're in a similar position as me. View detail
I don't need it.
I could do without it.
I don't care if there is.
I can make adjustments without worrying about injury.
View detail
For Minimoto's Rear suspension7294
The gold amount is affordable, compact, and has a cover at the hand, which is nice. View detail
It's cheap and can be used with many types.
[How is it used?
I use this product to change the hardness of the Rear shock on my two Motorcycles. I bought two of these products.
Was the one you received as per Image?
Image
How was your experience with it?
Cheap but easy to use
[Points to note]
When you adjust it, you have to hold it with your finger while hooking it to use it. Because it is plastic.
How did it compare to other products?
Fixed Type's size is limited, so I think this one is good for many things.
Other items that would be helpful
I think it would be easier to turn if the hooks were a little stiffer instead of floppy.
View detail
Cosy hook wrench
I bought this because I needed it to remove the Stem when I repainted the Frame.
The deciding factor in the purchase
I was not sure of the size, so I bought it because it was a wide Hook wrench with some fit size and it was inexpensive.
It was a deciding factor for me because of the good reviews of the Impreza.
Impressions of use
When I received it, I was worried about whether I could use it properly because the feeling I saw for the first time was very simple, but when I tried to use it, the hook was firmly put and there was no problem.
In addition, I also used it to remove the Spring to clean the Rear Suspension, which also worked well.
I don't think I use it that often, but it helped me because I can use one for multiple areas.
If Torque is not applied, the Hook is slightly difficult to use, but considering the price, Level is not a problem at all.
Products compared
I compared it with Hook wrench of Tool Manufactureretc. I bought it because I could use it for multiple Size and it was inexpensive and had good in-play evaluation.
I compared with other Site, but this price was the cheapest with wide Type of fitment Size.
【Review】
They are inexpensive but do the job well.
It is good that 1 pc can be used for many Size, because it is only a tool that is not used very often unless the suspension spring is adjusted frequently.
View detail
Cospa best
I mainly use it for MONKEY
Removing the Top Bridge and adjusting the rear suspension are not often used It's just a tool and the price is low
I think it's a good tool to have
View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA MONKEY BAJA, HONDA MONKEY R, HONDA MONKEY RT
Clutch disassembly essentials
These tools are essential for replacing the Clutch on the HondaHorizontal TypeEngine
I have seen some people making their own sockets by cutting off the sockets, but when you consider the price and quality, you need to buy a special tool to make it I think you should
The Material seems to rust easily, but..
View detail
Can be used for low torque parts, product accuracy is decent
Used to install the StemLock nut on the LITTLE CUB
After replacing the Stem bearing, it was useful for initial tightening during installation
Because of its construction, it cannot withstand high torques and is limited in its use
The downside is that the pivot is too loose and makes the task a bit cumbersome
If you think of it as an auxiliary tool, it's a passable grade
View detail
Better than I expected
Space is limited with Back support and Chain Cover, and the OEM's Does Wrench deteriorate due to excessive use? I bought it because I started to do this, and again, the car-mounted tool was not strong enough and the tip was shaved off, so I had to use it We have changed this Wrench to an on-board tool
As per the Review, it seems to be fine for use in tight spaces
Try using it to change the Rear SuspensionPre-Set, make sure it's in the right position and use both hands It is easy to adjust the length of the car tool when working with the Done
Two suspension, like Mono Suspension both usable, easily and surely changed I think you can
The thickness of the tip is very thick and firm He chewed on it
It doesn't take much force to adjust the rear suspension to some extent with this wrench It seems to be covered
View detail
It is easy to use
There are no springs in the moving parts of Wrench, so I was worried about whether it would work properly, but When I tried to use it, when the torque was applied, it stuck properly and worked fine (One hand needs to be used while holding the other.)
I thought that the length of the wrench was about 16cm in Large size and short, but surprisingly, it feels just right! It was
It has good cost performance and works properly Recommendation
AF24Giorno FrontOne'S&M240mm, RearFORSA270mm, both used for 5-step initial adjustment
View detail
Any model can be used
It's for Minimoto, but I could use it for SS from SUPER CUB
Because the size is small, it is convenient to use it in a small place
It's not too much of a distraction to take with you to a course
It's also cheap
View detail
Fits: HONDA Forza., HONDA Forza., SUZUKI Sky Wave 250, HONDA phase, HONDA fusion, HONDA Forza(MF10), HONDA Forza (MF08), HONDA Forza (MF06), HONDA Forza350, HONDA fusion, HONDA Forza(MF10), HONDA Forza (MF08), HONDA Forza (MF06), HONDA Forza350
It is recommended
Impact wrench mounted in no problem at all
3 KJJOG 's Clutch disassembly unavoidably purchased
When setting again etc etc. I think that there will be opportunities to use again Since it is better to have more tools than less
View detail