Reviews
For CRF250L front axle
Purchased to loosen the front axle of CRF250L.
Although 14mm Hex is not a tool that is used very often, I purchased a solid tool because Off cars often have a lot of suspension modifications and there are opportunities to remove/attach Wheels.
The insert is 1/2, so you need to be careful only there, but it is a stable SIGNET and satisfactory tool.
View detail
For Ratchet driver
It is for Impact Driver, but I bought it for Ratchet Driver.
The length is just right and it is inexpensive, so it is very useful.
There is also a half-length No. 3, but I regret that I should have chosen the longer one.
View detail
Color makes it easy to identify Size.
Purchased for electric for Driver.
The sizes are separated by color, so there is no need for stress to find the size in a flash.
We use Vessel products most often because of their high accuracy and low price.
View detail
durable tool
I bought this SK11 25mm screwdriver bit set from webike. The set contains 10 tools. The tools are very detailed and durable. The surface has a micro-coating but is very thin, so the screw accuracy is very high, and it is not easy to screw the screw. A storage seat is attached for easy storage after use. -------------------------------------------------- -------- I bought this SK11 25mm upper set at Webike. The suit contains 10 tools. The tools are very detailed and durable. The surface has a micro -coating but thin, so the screw accuracy is very high. It is not easy Comes with storage seats for easy use. Powered by Google Translator View detail
That would be handy
This is the third place for Plus, and is also used for the Screw that holds the Crank Case Cover of APRIO, the Tapping that holds the Case of Cooling fan, and the Cover under Seat.
I use it in the Socket converted to Ratchet or wear it as it is when Impact Driver is available.
The Large Almighty's number is about the second largest, but I bought it this time because I was afraid that it might lick my head.
View detail
Socket for 1/4 of a forest road
I always enjoy forest road touring on my beloved HUSQVARNA TE250.
Since unexpected troubles occur quite often on forest roads, we always bring our own portable tools, but 3/8-inch tools, which are the mainstream in motorcycles, are heavy to carry.
This is where the 1/4Size tool comes in, but the Adapter also allows the use of a hexagonal Bit, making the tool lighter and more convenient to carry.
I really enjoy optimizing the tools I carry.
View detail
Good quality and easy to use
The 'mug catcher' part of this set means thats there is a magnetic sliding outer part that will slide up the screwdriver bit and hold a screw in place. This is very useful for working on screws where you cannot reach told put in or hold the screw in place. The 'mug catcher' is removable and will fit these and other driver bits. This set is good for the price but the mug catcher is quite large compared to some other sets. View detail
The best of the mug catcher bits
The 'mug catcher' part of this set means thats there is a magnetic sliding outer part that will slide up the screwdriver bit and hold a screw in place. This is very useful for working on screws where you cannot reach told put in or hold the screw in place. The 'mug catcher' is removable and will fit these and other driver bits. This set is my favourite of the Vessel range as the mug catcher is smaller compared to some other sets so fits in smaller spaces. View detail
Works fine but is not perfect
This product does work but does not take very bit cuts so will take some time to remove burrs. It does work though and is good for threaded bar stock. View detail
Another fine product from Vessel
The + bits in this kit are great for anyone using a bit ratchet on a Japanese motorbike as they fit the screws properly and allow you to use tools bought elsewhere for that job without rounding the bolt heads. The other bits work fine but I bought this set for the + bits. View detail
Convenient
It can be used to turn screws, etc., that cannot be turned with a regular Phillips screwdriver by using the back hand.
It is useful and convenient to have one.
View detail
Convenient to have
This is ko-ken's Bit holder.
9.You can use Bit in 5sq.
This is useful when you want to use Torque or Plus/Minus, which are not often used in Socket, in Ratchet or Tren.
For a change, a long bit of HEX can be used as an ultra-long HEXSocket.
The "BIT" is a very useful tool for those who have a certain amount of BIT, although there are few things you can do without it.
Bit holder is Large
Magnet Retention
Spring Retention
This product is Spring retention.
There are some bit holders that are not so easy to use, for example, the bit insertion part is too loose, the bit retention is too loose and the bit is pulled out, or on the contrary, the bit is stuck on the bit and the bit is not pulled out after work. It is just barely strong enough to pull out a bit with a bare hand.
Quality in this area is as expected of ko-ken.
It is highly recommended as a Plusα for people who have some tools.
View detail
He's a guy who doesn't get to do much at all, but he's a guy you can count on in a pinch.
[How is it used?
I bought it a few years ago, but kept it almost exclusively in my toolbox.
Was the one you received as per Image?
It looks like Germany.
How was your experience with it?
The Grip is easy to grip and apply pressure, and the Bit is accurate and easy to use.
The variety of Bit is just so rich and fun to look at, including some that I've only seen used in cell phones and European products.
However, even though there are many different types, in the case of Japan cars, there are not so many different types of screws that can be used to change the Bit so often, so it is not used in daily use at all. (Lol)
However, when I was replacing the Tandem Footpeg on my ZrX1200DAEG, I had to remove the C-Clip that holds the pin in place, but the standard MinusSize was too large to fit in the groove, and the Precision Driver was too small. But with this Quantity:I managed to remove the Clip with the Minus 3 Size that was included in the Set, which was very helpful! (Lol)
[Points to note]
There was no instruction manual, and the method of fixing the bit to the socket holder was of a different type than that of the JAPAN products I have experienced, so it took some time.
How did it compare to other products?
I compared it to other manufacturers such as ANEX, but the variety of bit types was unusually large, and it was the best.
View detail
Thank God it was there.
[How is it used?
I bought this to use when rosing the front fork of my TZr50R.
In order to remove the Inner Tube from the Bottom case, it is necessary to remove the Bolt of the bottom, but if you do not do it well with an ordinary Hexagonal Wrench, the inner part also rotates and cannot be removed.
One Side was removed well, but One Side was not removed, and I used it by connecting Impact Driver, this product, and Hexagon socket.
How was your experience with it?
I was able to get Bolt successfully, thanks in part to this product.
The time of use is really about 1 minute, but it was saved because the work had stopped here.
However, it is a little hard to remove it from the Socket because of the accuracy of the ball of the joint part.
Well, I was happy with the price and the fact that it is a tool that I don't even know how many times I will use it.
How did it compare to other products?
Originally, I bought a Hexagonal Wrench for Impact Driver and tried to use it, but it was not long enough to be exquisite and became useless.
The distance to the Bolt on the Front fork of the TZr50R is surprisingly deep, so you may need to be careful.
【Review】
It's a pretty limited tool, but it's been a huge help to me personally.
The accuracy is not as good as the famous tool manufacturer, but it is good enough for Sunday mechanic.
View detail
Torque is easy to apply.
It is also effective for screws with locktite such as Bar End. View detail
It's useful for weak areas of Torque.
It can be used for a lot of things, from bicycle maintenance to narrow places in the back of a scooter. It is rather sturdy and has been used as a tool in the garage for a long time without rusting even if it has been left for several years. View detail
It's cheap, but convenient for in-car use.
It's a great product, the price is reasonable and it's easy to lick the screw, but I used it on my ksR110, and it's a good price for changing the carburetor jet and changing the setting while driving. View detail
Just fit
I bought this for my Carburetor Pilot Jet.
It was Just fit on a Mikuni BS34 Pilot Jet.
The tip of the blade is Straight to some extent, so it can reach the bottom of the Jet.
There is a slight rattle when turning, but I don't think the Jet will chip or anything.
It would be perfect if the thickness of the cutting edge was another 0.1?
The width is Exactly.
View detail
Expected
The hardness, the bite, it's great.
I have a preference, but I'm the first of this kind of Bit.
Some people may think it's too hard and will damage the Bolt, but I use it with the softer Snap on depending on the application.
View detail
This is my favorite tool.
This tool can be used for both Bit and 1/4 socket. I mainly use it as a tool to carry when touring in the forest. View detail