Reviews
Torque also has a Quantity:Set is convenient
I wanted a Torque set and found the other SK11Socket easy to use, so I bought this one. View detail
Maintenance
Quantity:I was contemplating the purchase of a set tool and it was on sale, so I didn't hesitate to buy it.
The glossy finish gives it a luxurious feel and the display is easy to read.
It is very useful for installation and maintenance of custom parts.
I think Spanner will be sufficient for some work.
The stop Bracket of the lid is easy to come off, so I made it functional Minus 1.
View detail
![Axle shaft sockets [4 sizes]](https://img.webike-cdn.net/catalogue/images/95068/yk022001_TS.jpg)
Necessities
Purchased for front axle shaft removal and attachment for tire replacement on GSX-R1000. It is very accurate, perfect fit, and safe to use. View detail
The knock pin are a part that do tend to sustain damage and is advisable to replace when this the case
About quality and texture - The pair of knock pins from K-Pit are made from steel and raw surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The knock pin is a part that do tend to sustain damage and is advisable to replace when this the case. This will ensure easier installation and removal of parts like the cylinder head, cylinder and crankcase halves when it comes time to overhauling the engine, as this is where they are used on the Honda Grom. Products to buy together - Key products to purchase when overhauling the engine would be gaskets and O-rings, all which are available from K-Pit here on Webike for the Honda Grom. Difficulty of installation - The installation of the knock pin is an simple task that took 0.1 of an hour to complete. Common sense and the use of your hands is all that is required to clean the mating surface and press the knock pin into place. Cost performance and comparison with other products - I find the cost of all the products K-Pit sell to great value when compared to what most other companies sell their products for and the knock pin is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the knock pin, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Buy for Maintenance
The scale is colored for easy understanding.
It is used infrequently, but it is used for Large.
View detail
Small Water Resistant Paper 100pcs.
Large size is easy to work with, even for small scratches!
Outclassing is a pre-treatment for Motorcycle Cowl before painting!
This Quantity:Set has made a lot of progress in preprocessing!
I would like to buy again.
Thank you for the Large change!
View detail
Small but...
It was smaller than expected, but considering the purpose, it is natural that it was small.
I bought it for another purpose but I am satisfied with YOSHIMURA Logo.
View detail
Inexpensive but effective parts
The fastening Bolt of BMWOEMBrake Caliper was rusting, so I replaced it with Titaniumium Bolt from Rise Corporation during Overhaul.
A certain Oak Auction has a Bolt made of SUS304 Stainless Steel for Caliper fastening, but considering the fracture strength of the material, I think it is very dangerous and has a high possibility of breakage.
This Titaniumium bolt should have no problem in terms of strength, and the screw threads are beautifully machined.
View detail
Step up from SteelScrew!
[How is it used?
Screw was replaced with external Fender, so Screw was changed from Steel to Material:Replaced with Stainless Steel.
Was the one you received as per Image?
Quality is as good as the Image.
Was the installation difficult?
Installation is easy as the SteelScrew is simply replaced.
How was your experience with it?
Fender is often exposed to moisture, so the replacement was made in consideration of durability, but it can be used without worrying about rust, so it is a sense of security.
[Included Parts:were they on?
No other than Screw.
[Was there anything that disappointed you?
The NORMAL Screw is slightly rounded, but this is a dish Screw, so the shape is slightly different.
▼I'm afraid of biting, but I think it is better than Steel rusting.
View detail
Both cost-effective and convenient
I had a Socket version of this shape, but it was not tinker-proof, so I purchased this product. The price was just right for those who think that a set of tools in a tool box is enough, but not for those who think that the texture is also an attractive feature of tools. View detail
On the side cover.
I chose this one because the Bolt on the Side cover of WR250X was missing.
The color is beautiful and the installation is flawless.
View detail
Too Large to use for Scooter
[How is it used?
I bought this for Scooter Oilfor replacement.
When changing oil in the center stand of PCX125, it is difficult because there is no space to place a saucer.
Was the one you received as per Image?
I bought a Large size, but it was larger than I expected.
The texture was very good, and it looked like it would last a long time.
How was your experience with it?
With the Center Stand in place, I was able to change the oil, but the space under the Scooter and the size of the Oil Pan were too large, and it felt cramped and difficult to do so.
I am still glad I bought it, but I think I should have bought the One sizeSmallest one, because it is also very expensive.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
RokudaboPlug replacement
[How is it used?
Purchased with Plug as it is needed to replace Plug in CBR600RR PC40.
Was the one you received as per Image?
The quality of the plug wrench is good and the magnet in the plug wrench makes it easy to catch the plug.
How was your experience with it?
As a plug wrench, it does its job well and is highly rated for its texture.
However, since this was my first time replacing a 4-cylinder plug, I struggled with replacing #2 and #3 and eventually gave up and asked Motorcycle shop to do it for me.
We were told that a less thicker plug wrench would be more suitable.
I don't know if I will have to come back to it in the future, but it was good as a Plug wrenchSingle Body.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Used for Torque management of brake hose banjo adapter tightening
Aluminum banjo to avoid cracking and splitting due to over-tightening.
Wobble is minimal and the feel is good.
There are not that many scenes used, but since the price is Reasonable, I don't think it's a problem.
Note that the mounting orientation on the Torque wrench needs to be corrected, so we recommend referring to the WrenchManufacturer's usage instructions.
View detail
DID Kashimaru Gun Rivet & Cutter Pin Product # 4525516902113
Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery View detail
Bolt replacement in prominent areas allows you to use it without worrying about Rust!
[How is it used?
I purchased this to replace the Fender mounted Bolt on the Front fork.
Was the one you received as per Image?
It was shiny and high quality, just like the Image.
Was the installation difficult?
It can be easily installed by simply replacing the Bolt with a NORMAL Bolt.
How was your experience with it?
It can be used without worrying about Rust.
It is also shiny, though not as shiny as Plating, and good for the price.
[Included Parts:were they on?
No other than Bolt.
[Was there anything that disappointed you?
Not particularly
We do not recommend this because we are afraid of gnawing on the area where the heat is applied.
I appreciate the wide variety of lineups, such as ▼length and large size.
View detail
Made of Stainless steel, you can use it without worrying about Rust!
[How is it used?
By replacing the Front Fender, the Steel Bolt was replaced with a durable Stainless Bolt.
Was the one you received as per Image?
The quality was as high as the Image.
Was the installation difficult?
Bolt replacement for easy installation.
How was your experience with it?
It will be used for a long time without worrying about Rust.
The Button bolt looks more expensive than the Cap bolt.
[Included Parts:were they on?
Nothing else is included.
[Was there anything that disappointed you?
Not particularly
▼Quantity:It would be even better if there is a Package that comes together as a Set product.
View detail
circling a large number of insects
This is fine as it works without any problems! View detail
This is a useful tool that one should have at home!
[How is it used?
I had been using a cheap Ratchet Handlebar, but it started behaving suspiciously, so I bought a new one.
Was the one you received as per Image?
KTC is a quintessential KTC company. It has a solid weight, stable operation, and I could tell immediately that it is of high quality. The tool is just as I expected.
How was your experience with it?
Accurate and stable tightening and loosening.
Although the handles are plating instead of rubber, they are less susceptible to deterioration than rubber, so durability can be expected.
[Points to note]
The switching is no problem, and it can be changed from Snap to Snap, which is totally different from cheap ones. It can be used without any problem even if it is applied in a slightly large Torque.
How did it compare to other products?
I have only used cheap ones so this may not be helpful, but I wish I had purchased it earlier as it has enabled me to install and maintain Parts accurately and consistently.
KTC is the best. It is so good that it makes me think of replacing other tools with KTC little by little.
View detail
It is inexpensive but also very practical!
[How is it used?
I bought this to remove the fork top bolt on my CB1100.
Was the one you received as per Image?
I was surprised to see that it was LARGER than expected.
How was your experience with it?
It works fine as a Glasses Wrench, it looks expensive because of the DAYTONA stamp, but I am satisfied with it because it is cheaper than similar tools from Home center.
[Included Parts:were they on?
Nothing else is included.
[Was there anything that disappointed you?
None in particular. Good quality, practical and good looking.
▼It is definitely better than the cheaper Home center tools. I don't know about durability yet, but I want to use it for a long time.
View detail