Reviews
DAYTONAFilter wrench
I bought it for my motorcycle, but I can also use it in my car. View detail
DAYTONA Filter wrench
I bought it for my Motorcycle, but it can be used for my car as well. View detail
Satisfied, except for the price.
The quality is good and satisfactory. If only the price could be kept a little lower. View detail
Increased work efficiency
Used to remove and install Crank Case Cover
Convenient and reliable
View detail
Used for detachment of Clutch and Flywheel
I think it is a reliable Manufacturer.
If there is oil on it, it will not hold firmly.
Large cut is to degrease the part to be removed and the place where the tool comes in contact with it!
It was easy to use
View detail
Fits: KAWASAKI KSR110, KAWASAKI KLX110, HONDA MONKEY, HONDA MAGNA50, HONDA DREAM50, HONDA CUB Engine (FI Vehicles), HONDA CUB series Engine (Cell starter vehicle)
FIMONKEY, Flywheel removal
I think it was easy to use. It was safe to use. View detail
Used for pre-ride inspection
I always use this guy before a long run to watch the voltage.
I have been stopped twice now for electrical abnormalities. I think it is much better than tolove it on the road. I have no problem using it, but the body is sticky.
View detail
Fast delivery and good quality packaging
The product arrived 4 days after ordering. Thank you for the fast delivery. The quality of the product is good compared to the price. Webike's credibility is increasing. The set consists of the necessary tools and has a stall.
Searching is easy by organizing product categories by bike model. ---------------------------------------------------------- The product arrived 4 days after ordering. Thank you for the fast delivery. The quality of the product is good compared to the price. Trust in webike increases. It consists of tools that require a set configuration and has a stall. Searching is easy by organizing product categories by bike model. Powered by Google Translator
View detail
Easy to use, but a little expensive
[How is it used?
I needed Wiring for the Circuit run.
There are 3 pieces in the package, so it can be used for 3 points:Drain bolt, Filler cap, and Oil Filter.
Was the installation difficult?
In the case of the 6R, the Drain bolt was wired to the Oil Pan Bolt, the Filler cap to the Bolt on the Clutch Cable Bracket, and the Oil Filter to the Bolt on the Sprocket Cover.
The Oil Filter was wrapped around the Hose Band and the Wire was passed through the Hose Band.
How was your experience with it?
Small, unobtrusive and easy to use, but a bit expensive….
I think you can get a cheaper one from another manufacturer.
The logo is so small that it is almost invisible.
View detail
feel well
I think the price is still a little high since it is not something that is replaced frequently. However, safety is our top priority, so I think it is unavoidable. View detail
Just in case.
It may not be an option, but Neck is the pricey one for this kind of thing. View detail
Large Satisfied
[OEM] When we tried to install the for SportsterFrontEngine Chrome Mounting Bracket, the supplied Bolt (1.25-inches) was too long and the Bolt did not fit between the Frame and EngineBody in one place. So we decided to use this 1-inch Bolt (the OEM Bolt is also 1-inch) and installed it. It was very helpful. View detail
Weighty.
The product is quite heavy, strong and cosy. View detail
Seriously, Garbage.
It was fundamentally broken after 1 shot of use! Seriously Garbage. View detail
As a test
PlasticCleaner, I bought it to try it out because it seemed to have good reviews. The price is not that high, but the quantity is not too much.
It seems to be good for some Small scratches and dirt removal.
View detail
Required for OH above the waist
Used for Valve matching. This is a task that is rarely done, so I am thankful for this Size. (Even this Size will probably never run out.) View detail
To the OH of SEROW.
I bought it because it is cheap, around OH above the waist of SEROW. Don't forget about Valve compound. View detail
Well done!
I honestly did not expect much from a reasonably priced product, but it is well made! The rubber strap is too long, so I recommend cutting it and sewing it lightly by yourself to make it more comfortable to use! View detail
Convenient to have
It can also measure depth, which is very useful to have.
The movement is a little stiff, but I think it is appropriate for the price.
View detail
It's so cool!
To be honest, it's a little expensive for Bolt, but it's just good looking! Use Gold attribute polish regularly. "polish" It is necessary, but it is also part of the fun! Natural Brass color that is not obnoxious." It is also a high point that it does not stand out too much! It stands out casually, so you can see it many times while touring. Where do you sell it?" I recommend it to those riders who know the difference! View detail