Reviews
As a replacement for OEMBlinker relay
I bought a battered 900SS (900SL) and am Restore.
In this situation, RearBlinker decided to change to ultra-small type LED's for various reasons.
The front is a Cowl recessed type, but since this is part of the body design, it is used as is, and the light bulbs inside are not converted to LEDs, but are left as they are.
This would be a hassle with bulbs in the Front and LEDs in the Rear, but times have evolved and there is now ICRelay, which supports a variety of wattages and makes everything look good.
The problem is replacing that ICRelay with the original Relay.
For ordinary Japanese cars, it is a 2-pole universal layout, so all you have to do is plug in the Conversion Connector that comes with the Relay, but unfortunately, DUCATI is a 3-pole Relay.
In addition, the connector is fixed to the body of the car, and the Relay is inserted into it, which is the opposite arrangement from that of domestic cars.
(For domestic cars, the RelayBody is mounted on the car body, and the Connector extending from the Harness is inserted into it.)
So we decided to disconnect and discard the UniversalConnector (Female side) from Relay and make our own Conversion Connector that would be Male-Male.
After carefully checking the terminal shape of the OEMRelay, I realized that it is the same as the H4Headlight Connector.
So I bought this Kit to create H4Connector.
Although there are a variety of female connectors that can be used with H4 Valve, there are only a few that can be used to create male connectors that reproduce the shape of the Valve.:Set is appreciated!
Unfortunately, the H4 and OEMRelay terminals had different widths, although the connector shape was correct.
The OEMRelay terminal width is about 6.4mm, and this H4 terminal is about 7.7mm wide, about 1.3mm thicker, so Quantity:Pair (for Left and Right) was shaved and prepared 0.6mm at a time.
However, the terminals are generated by folding a flat plate 180° with PRESS, so if both ends of the terminal are shaved, the folded part is lost and becomes RoseRose.
To avoid RoseRose, before shaving both ends, solder is poured inside the terminal to fix the PRESSED board firmly in place, and then both ends are shaved...Relay terminal is completed!
The completed terminal has a different width at the insertion point, but the rest of the terminal remains the normal H4 terminal shape, so it can be used by inserting it into an H4Socket as usual.
Just check the terminal positions of ICRelay and OEMRelay (they were in a position relationship that would not function if you stuck them in as they were) and assemble them.
We were able to connect the Relay receiving Connector on the car body side and the replaced ICRelay Connector while converting well.
The terminals included in the Connector set are gold-plated and magnificent, and their shape and strength are quite normal and perfect.
Male of H4Connector. It should be a rare occurrence, but if you are having trouble with HID or LED wiring, this is the perfect solution.
View detail
for BlinkerBullet Type Terminal replacement
I bought a battered 900SS (900SL) and am Restore.
The body of the car is in shambles, but the Harness is fine! There is no such thing as a "wiring".
The 900SL (900SS is the same) has a front blinker embedded in the cowl, which is unusual for a sports type motorbike, and is connected to the 6V MONKEY/GORILLA Main Harness with a Bullet Type Terminal. The front blinker is embedded in the cowl, which is unusual for a sports type motorbike.
However, the Connector uses not only the Bullet Type Terminal, but also an ultra-thin Flat Terminal to connect the BlinkerBody to the Harness.
This is the same as the Flat Terminal of the stop lamp switch used in the front master cylinder, and is an example of a terminal that can break off if handled carelessly.
Bullet Type Terminals can be very difficult to remove when fitted tightly.
When pulling in a narrow cowl, it is easy to pull Wiring as hard as you can with the momentum of the pull out.
If the momentum breaks the ultra-thin terminal that connects to the BlinkerBody, it will be Large strange!
Parts are still available, but they are expensive (nearly $10,000 for One Side) and we must try not to break them!
That's where this Connector comes in.
The original Bullet Terminal is left in place and a very short Connection Connector is made, and the 110-type Connector is used for connection and disconnection.
This way, the valuable Blinker body is not destroyed because it does not require monstrous strength to pull it out.
In this case, it is a non-polarized part, so it is fine, but this Connector is not reversible, so it is also ideal for parts that require polarity.
You can make a lot of progress just by stopping Bullet Terminal and using this Connector!
View detail
Connect to SMART
Used to pull power for USB to XSR900 (RN80J).
It can be connected exactly to the standard DCJackCoupler for Option.
I am satisfied with Large because I was able to connect neatly without doing anything unnecessary.
View detail
Fits: HONDA MONKEY125, HONDA PCX, HONDA ADV150, HONDA CRF250L, HONDA CBR250RR, HONDA X-ADV, HONDA NC750X, HONDA CBR1000RR-R
Used for CRF250L in 2023
I bought this Connector to get ACC/GND from the Optional connector on the Headlight coverReverse side.
The shape was fine and the power supply was taken out perfectly.
If you want to get power around the Handlebar, use this Connector to complete the wiring around the Headlight, so it is easy to change the Large.
View detail
SEROW225 WE Blinker used to replace relay.
SEROW225 WE used to replace the Relay for the BlinkerHigh flasher countermeasure. It fits perfectly to the Connector on the car body side, so it can be set back to NORMAL. The quality is satisfactory. View detail
Used for Koken:Mechanical Clutch Holder
What made you decide to buy?
Roller Type Micro Switch used in Koken's Mechanical Clutch Holder to fit 6ROEMClutch switch.
[How was the installation?
Coupler and terminal are Quantity:This is a set of products. I was worried about the attached terminals, so I bought only the spare terminals in case I made a mistake. When you are temporary caulking, it is important to make a good shape of Heart to get a good finish. Also, be sure to check the type of terminals on the female and male side of the coupler, as they differ.
How was your experience with it?
Since it has the same shape as the 6ROEMClutch switch, the clutch switch function can be used simply by removing and replacing the OEMCoupler. (Please check CouplerMale and Female side before working.) It is also recommended because it is the same color, so there is no sense of discomfort.
View detail
I haven't tried it yet
Anyway, the role of the service connector set is already
It is a part that I know well and have used often from the past.
If the error code of Honda vehicle is detected, it is necessary to check
parts. I bought a new one as the shape of the connector changed along with the new emission regulations. Delivery degree
It came quickly and the product looks fine to the naked eye. -------------------------------------------------- -------- Anyway, the role of the service connector set is already It is a part that has been used well and has been written frequently since the past. When detecting an error code of Honda vehicle, it is necessary to check Parts. In addition to the regulation of new emissions, the connector's shape has been changed and newly purchased. Shipping It came well quickly and the product seems to be naked. Powered by Google Translator
View detail
NSR250R (MC21) Position lamps in the
[How is it used?
NSR250R purchased used. (MC21) I purchased this product because there was no position lamp in the headlight of
When purchasing a T10Socket, I compared this product or M&H Mats Stripe, No Brand product made in China.
Bullet Type Terminal eliminates the need for wiring (Required for 6V MONKEY/GORILLA Main Harness side) So, I chose it because it comes in two packs and the rest seemed reliable since it is a Brand that produces a variety of NSRParts.
Was the one you received as per Image?
It was grayer than it looks in the picture. (Naturally, there is no problem in actual use.)
Bullet Type Terminal was also installed without problems.
Was the installation difficult?
Anyone can replace the Valve without tools by simply plugging in the 12V and T10 size Valve and attaching it to the Headlight.
There is no problem with the fit with Valve and Headlight, and it seems to have a moderate resistance and does not seem to shift.
Wiring on the 6V MONKEY/GORILLA Main Harness side has been changed since I purchased the vehicle in my case, so I am not sure about the OEMHarness modification.
How was your experience with it?
Naturally, the light came on without any problems.
Valve is M&H Pine Stripe's WedgeSingle Bulb [Color] Clear (https://www.webike.net/sd/1557693/) I used the
I have just started using it, so I don't know about its longevity and deterioration, but so far I am satisfied with it.
[Included Parts:were they on?
This is the only product as shown in the photo.
[Was there anything that disappointed you?
Not particularly
【Review】
China No-Brand products are of questionable reliability, while those of a good manufacturer are expensive, but this product is positioned right between the two.
In the end, China products are just less expensive, like 4-packs and 5-packs. I don't need that much. I don't need that much." but this product is just right in a 2-pack.
For old cars, it can be used as a position lamp, meter lamp, etc., or for repair in case of emergency.
View detail
You can process it with just Pliers.
Just the right amount and the system isn't badRecommendation! View detail
Fits: HONDA PCX160, HONDA PCX125 EHEV, HONDA PCX125, HONDA
Used on New Model GSX1300R HAYABUSA.
I've been trying to reset the inspection display on my New Model GSX1300R HAYABUSA, and I'm resetting the settings when I replace the oil. View detail
Fits: HONDA CBR1000RR-R, HONDA NC750X, HONDA X-ADV, HONDA CBR250RR, HONDA CRF250L, HONDA ADV150, HONDA MONKEY125, HONDA PCX
after my purchase
It was good that the delivery was fast. It came early. Why do you keep urging me to write down my review?It was good that the delivery was fast. It came early. Why do you keep urging me to write down my review? View detail
Useful to have
[How is it used?
I have been using Bullet Terminal for all of my Harness tweaking. Sometimes, when I have the motivation, I use AutoBacks and Color:I used to go to YellowHat to buy Coupler sets made by Emon, but it was a hassle to go buy them & expensive to buy them one by one.
Was the one you received as per Image?
It is just like the Image. Or rather, the quality is better than I expected.
Was the installation difficult?
Just turn the Wiring with Electric Works Pliers, Crimp and plug it into the Coupler.
It is useful to have a tool like this (https://www.webike.net/sd/2084789/) in case you plug it in by mistake. If you can pull it out cleanly, you can reinsert it.
How was your experience with it?
I no longer have to go out and buy every single thing, and I can put Wiring together neatly.
The fact that it comes in its own container is also a plus, as it saves me the trouble of going to the 100-yen store to buy Case.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
You can find other couplers from MINIMOTO (https://www.webike.net/tab/parts/bm/1409/br/1384/?q=%22%22&scls=2).
View detail
Used for Wiring processing
Used for Wiring processing.
I am very satisfied with the quality and the many types of products.
View detail
Create your own Shift indicator
I used it as a connection to create a Shift indicator, TAB, receptacle clicked in and there was no situation where it could be removed.
I found the exclusive products to be excellent.
View detail
Easy to pull out, incomparable to Radio pliers.
This product is a special product, and the Connector can be easily disconnected. The trouble I had to go through with the Radio pliers was now a complete waste of time and effort! View detail
it's simple
This is useful because it allows Wiring to be easily interrupted.
It does not require soldering or Bullet Terminal processing.
Ideal for installation in small areas or when it is troublesome.
Note that if you do not understand how to use the product and install it properly, you will have poor contact.
View detail
Used for branching power lines
I used this product to install a USB power supply on my Motorcycle, and while it can be branched without the need for a special tool, be careful not to squeeze it too tightly with pliers or the cord will come off! View detail
TO SWAP MY CUB 50 TO 100engine
ENG: i have 100cc korean engine and i need change some few cables from engine 5 cables but this engine so old condition and i must replace connceter so i choose this and it fit perfect little bit small but if you change male - female connecter both it will be fine and easy old korea enigne has 5 cable ( N , 4th ) and original cub 50 has 3th gear so only has N sensor Once connected, green-yellow-white-blue-black-green-red View detail
Looks like a Large thing.
Style maintenance OK with Repair Parts. View detail
The Position is on.
I added the position function when I replaced it with the Blinker of the traditional small type. With a little modification, it can be easily seen from other cars. View detail