Reviews
Save money compared to buying at Rose!
The color stands out and gives it a custom feel, and as a manufacturer, I feel secure. I usually use OEM products, but I bought this product for fractional adjustment as well.
The quality and appearance were satisfactory.
View detail
520Conversion Demerit
It is cheaper than collecting OEM parts, and as you all know, there is a Merit to make the 520. However, the Noise when driving will be Large.
It sounds like the sound when the bottom of the teeth of the front sprocket (Driven Sprocket) hits the Roller of the Chain.
The OEM Sprocket has a Ring-shaped anti-vibration Rubber, which reduces Noise.
As a countermeasure, I had some DAYTONAInsulation Glass WoolSeat left over from a previous purchase at Webig, so I attached this to the inside of the Sprocket Cover.
As an effect, Noise became much smaller.
View detail
Bolt hole in rear sprocket is Large
It is cheap and good, but the only thing that bothers me is that the Bolt hole on the Rear sprocket is Large. I'm worried that it might move during use. View detail
sounding good
I can't do it myself, so the person who did it for me said that FrontSprocket is very good, in terms of material and lightness, etc. Rear sprocket can be attached with either a pure normal thread screw or a taper bolt, according to the specs. View detail
The cb750...
WeBig has always been a great help to us.
Thank you very much for your cooperation from now on.
View detail
520Conversion
Chain, I purchased this item from Timing on Sprocket exchange.
The secondary deceleration ratio is now about 2.7, and I can drive Smoothly without feeling a lack of Torque during acceleration. (At first it felt strange when starting off, but once I got used to it, I prefer it this way.)
View detail
Fits: KAWASAKI GPZ900R
SUNSTARFront & Rear Sprocket & Chain
We chose Black gold to match the car body color.
The Drive/Driven was also replaced and the push/pull was lightened.
Sustainable, safe, and largeup.
View detail
How nice
I had a motorcycle shop take a look at it and they said it really hasn't grown at all. View detail
Fits: KAWASAKI ESTRELLA RS CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA CUSTOM LE
Sprocket and Chain are recommendation to be exchanged at the same time.
Chain and Sprocket Quantities:Set
I replaced both because they were noisy around the Rear at 2000 km at the time of purchase used.
Chain was purchased because of its simplicity in that it is pre-cut.
First, let's talk about Chain and Sprocket and their respective roles.
■Chain‥
Chain is a Motorcycle "Important safety parts" It is one of the parts designated as a "Rear Wheel Power Converter" and is responsible for transmitting the power of the Engine to the rear wheels. 。 The parts that make up the drive chain consist of the pin that supports the load applied to the chain, the bush that supports the pin, the roller that meshes with the sprocket (gear) and absorbs impact, and the inner and outer plates that are the strength members.
Chain is a consumable item, and the large impact on the life of the chain is "Elongation" Swing Arm rear end. Chain pull." If the tension is stretched to the point that it cannot be adjusted with the (Chain may come off while driving!) If the length of the product grows to some extent, even if it is less than that, it must be replaced.
Sprocket‥
What is Sprocket? Sprocket." It plays an important role in transmitting the power of the engine to the tires. 。 The Sprocket is always in contact with the Chain, but since it is usually covered by the Cover, it is often overlooked during maintenance.
Quantity of Chain and Sprocket exchanged this time:Set→
When replacing a Chain, should the Sprocket also be replaced or not?
"Since the expenses will increase, I'll just exchange the Chain this time for now…." That's the truth (laughs).
However, it is a recommendation… to replace the Front sprocket and Rear sprocket at the same time, or as a result, it is more profitable to replace them at the same time.
Because if the Chain has been running long enough to stretch, the Sprocket is definitely worn out.
good point
Chain and Sprocket are a set, so you can choose each separately and save time and gold.
Since it is MADE IN SUNSTAR, the performance is perfect.
Chain is already cut, so you don't have to go through the trouble of getting a Chain Tool to do the work. ←This is important.
important point
When touching Sprocket, bare hands are dis→ed.
● The work process is tedious because there are many work processes.
Since it is related to power, I think there is little demerit in replacing it.
Point is that it is better to choose a Manufacturer to some extent. Not so much in terms of performance, but in terms of durability and accuracy.
Timing better to replace Chain and Sprocket
When vibration or noise is Large around the ▲Chain.
Pitch of Chain (Distance between Pin and Pin inside Roller) and Sprocket's Pitch (distance between teeth) will be Gap, the so-called Pitch shift. The Sprocket can be worn out at an accelerated rate. If the Sprocket runs with a pitch shift, the bottom of the Sprocket teeth cannot catch the roller, and the Sprocket wears out at an accelerated rate.
▲When you feel fuel consumption deteriorating.
In the above situation, replacing only the Chain or only the Sprocket will not solve the problem.
Instead, the chain grows faster and the sprocket wears out even more, and a vicious cycle ensues. And when only the worn-out Sprocket is replaced, the Chain is still not resolved because the Chain has grown to some extent at that point, and the Chain misalignment is repeated. As a result, the life of the Chain and Sprocket as a whole is shortened.
Since this is caused by the interaction of deterioration and wear of the chain and sprocket, we recommend replacing them at the same time.
With proper replacement timing and daily maintenance.
View detail
Fits: HONDA CB1100 EX, HONDA CB1100, HONDA CB1100 RS, HONDA CB1100 EX, HONDA CB1100
Fit and better quality
The best quality ever than the stock one, lighter and stronger, three colors match your bike, and important thing its a corrosion resistant View detail
Fits: KAWASAKI NINJA400, KAWASAKI Z400
differently coloured
Order Rear Sprocket color was with Silver plating though,
The actual color received was Black.
View detail
Motorcycle seems to have come back to life!
V-TWINMAGNA, which is currently on this Chain & Sprocket's Quantity:Set is located in Minami-ku, Okayama City. PrimeFACTORY. The installation was done at
I think it is partly due to the store's high level of work skill, but my car, which used to feel inadequate in terms of driving power, has shown improvement as if it had been revived!
Excellent quality of this product as well as
Thanks to PrimeFACTORY for their high technology!
View detail
Great product and packaging.
DID is a reputable brand for chains and sprockets. It's perfect fit as replacement to the OEM chain and sprockets which have given me trouble free riding for 25k kilomters. It also came in a good box. A quality product true and throught. View detail
Fits: KAWASAKI ZEPHYR400X
It looks great.
When I installed it, I saw that it improved Parenthesis tremendously.
I am self-satisfied, but I think it looks better than OEM. Now I wonder how long the durability will last.
View detail
It's almost like a strange noise.
The product compatibility was also confirmed by PRO's engineer and installed.
After the installation, I got on the Motorcycle,
It is, it is a strange noise that goes beyond the Engine sound.
Gyuin.
There is no next time.
View detail
Fits: KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100
Replaced after 40,000 km without replacement since new car, due to strange noise.
I have been riding with Large, but I started to hear strange noises and problems.
Replacement, vehicle specificQuantity:Purchase Set
In the "Impression" section, there were some comments about steel being prone to rust,
Selected Silver, Glaringly when opened!
It's not to my liking, so I'm screwed! I thought, "Oh, no!
When I put it on, it did not feel so glaringly
No more noise and smooth ride.
I was also able to get it at a reasonable price and was very satisfied with Large.
View detail
MADE IN SUNSTAR products are Quantity:Save with the set!
SUNSTARChain&SprocketQuantity on a TRX850 drivetrain Restore that I bought used.:1 Set of 3-items introduced.
The front drive sprocket is forged, the RearDriven Sprocket is made of high-strength Duralumin, and the Chain was conceived and created by SprocketManufacturer, a company developed by SUNSTAR.
Sprocket is, needless to say, made in Sunstar, which claims to be the world's No. 1 PRIDE, and the system and durability are sufficient. The precision that does not deviate to the last inch is a stone's throw.
Chain is the first MADE IN SUNSTAR product, but what I felt when I installed it on the car body was Smooth.
Generally, when you turn the wheel in ChainMaintenanceetc., you can hear a rattling sound, but the SUNSTARChain makes almost no noise. I was surprised at this.
Mr. SUNSTAR good stuffQuantity:Thank you for the Set.
This time, we dared to choose Standard as the chain color, but whereas other companies use different materials, Made in Sunstar products are all the same, with only Gold, Silver, and Standard without Plating. The only difference is that the Plating is Gold, Silver, and Standard without Plating.
It means that the so-called appearance is different, but the weight due to the different Material is the same.
The difference between cheating Owner Maintenance with Plating or keeping it Clean with Love.
Of course I chose the latter affection.
View detail
of good quality
I bought the same one last time to replace it, but the chain didn't seem to be extended at all, even when I measured it. Is it OEM from somewhere else? View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Gold that is not Shiningly nice.
CB400SF bought used, because the Chain was RustRust.
Ask the store to replace it.
I'm not particular about ChainManufacturer and Sprocket is also interchangeable.
It is safe to do so if you have thisQuantity:Set.
Gold is not Shiningly but moderately erotic (Lol) the reason is that ...
I love it
View detail
liked it
I took it to a motorcycle shop to have it inspected, but they told me that there was really no growth. I wonder if it's because the front and rear sprockets were replaced at the same time. I wonder if I can use it a little longer. View detail