Reviews
Simple.
Although 2Camera (front and rear) has become the norm for Motorcycle, we chose Front's 1CameraType.
I decided to go with 1Camera because the rear wiring is troublesome, and the 2CameraType's rear image quality is reduced, which is good for preventing agitation, but not really necessary.
Since 2Camera costs about 35,000 yen, just 1Camera is better than nothing.
I usually use an IPhone, but I couldn't connect to the app and couldn't tell if it was working or not, so I guess I made a mistake...
So I connected with Android and was able to see it (laughs).
View detail
DriveRecorder for quality
Balance between price and performance (LED signals, nighttime images, front/rear shots, angle of view, etc.).
We chose this product based on our consideration.
Durability is undecided as we have just started using it.
View detail
Used for Radar installation
It is necessary to remove the Mirror until the Meter is removed.
I thought it would be easy, but it was more complicated than I thought.
View detail
![FITT360PBα [Wearable Recorder]](https://img.webike-cdn.net/catalogue/images/123148/01_TS.jpg)
neck-mounted digital voice recorder
As a Type without Wiring, I bought it for its ease of use.
The neck is thin, so it's hard to fix it. It is lightweight, so there is no burden on the neck.
As for the images, they're pretty good. (I'm checking general and wide angle, fisheye, not yet) . The sound sounds almost like noise to me.
The operating time is short because it is a rechargeable Type, but it is possible to use it for commuting to work, etc.
View detail
Well done.
Purchased for THRUXTONRS FE with KaEdia
The cheap ones will drop the phone, so this must be it.
The joint between the ball and the body is a little loose.
It comes out a little bit when you push it in.
It doesn't matter because I stop at Screw, but it bothers me a little.
View detail
Fits: KAWASAKI Ninja ZX-4R SE
M820WDController CT110 HUNTER CUB Brake folder Exactly for mounting
[How is it used?
MiVue M820WD Drareco Controller mounted in the Right SideBrake folder of the CT110 HUNTER CUB2BJ-JA55.
Although the name of the folder is Clutch folder, as shown in the product description photo, the folder can be attached to the Right Side Brake folder as well, effectively and securely.
Was the one you received as per Image?
Yes
Was the installation difficult?
It is easy. The angle of the brake lever changes when the brake folder fixing screw is loosened for installation. If you mark the current position before loosening the screw, you will not have to readjust it when assembling.
How was your experience with it?
It can be mounted securely, making it easy to work with Switch operation.
[Included Parts:were they on?
Yes. Matching mounting Bolt and collar are included and ready to install.
[Was there anything that disappointed you?
There is none. As expected.
▼ Requests
It would be easier to find a Brake folder if the name of the product listed is "Clutch holder...".
View detail
It's secure
[How is it used?
Used for FrontCamera installation of the MiVue M820WD driver recorder.
CT110 HUNTER CUBFrontCarrier mounting bolt was co-tightened to the Bolt. Although this is not where it was originally intended to be used, it was securely installed.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy!
How was your experience with it?
I am satisfied with the image and no shaking.
[Was there anything that disappointed you?
Expected
View detail
Fits: Others
EDR-21Gα
It took me a long time to put Wiring together nicely. View detail
ease of use
I purchased this for mounting a Camera on my Motorcycle using Ram Mount Parts.
The mounting is no problem, but it is troublesome to adjust the position and angle of the Camera for attaching and detaching the Camera because of the screw tightening only, so a quick release mounting is attached to the CameraAdapter.
View detail
![Motorcycle Drive Recorder "MiVue(R) M820WD" with GPS [Drive Recorder]](https://img.webike-cdn.net/catalogue/images/133556/25864484driverecoder_TS.jpg)
Very good.
Motard bikes do not have space to store the body, and I was concerned about the large size of the body. I chose this model because the body is small and the connecting cable is SMART and thin.
I was very anxious about the purchase, but I was able to install it without any problems, and I am glad that I was able to use the included double-sided tape and tie wrap instead of using a bracket.
View detail
For peace of mind
Purchased to protect myself and justify my own driving while driving on Motorcycle.
The product was relatively easy to install and complete.
It took some thought to run the Camera wires through the interior of the car body, but the rest of the connection was completed in comparative perspective.
The recorded images are clear and secure with no problems.
There is no GPS function, but the situation is satisfactory enough if you want to check the driving conditions.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Refreshing.
I am happy to be able to install the DriveRecorder-Body without having to worry about where to place it.
It is Stage of Exactly on Body.
View detail
Thin but rigid.
Plate itself is thin but rigid.
It is very helpful that a Bolt for fixing the Camera on the DriveRecorder is also included!
Installation of the bracket itself is very easy as it is co-tightened with the License Plate.
View detail
![Motorcycle Drive Recorder "MiVue(R) M820WD" with GPS [Drive Recorder]](https://img.webike-cdn.net/catalogue/images/133360/20240315_daytona_driverecoder_sd_1080_1080_TS.jpg)
Pretty good
I don't know about other drarecorders, but it is a normal shot.
Command on Switch is easy to understand and the UserInterface of the application is very clear.
I feel that the parking monitor is less likely to be triggered by the weak battery in SR400. However, the engine is started within 5 KICKs.
View detail
Large sturdy even on Motorcycle as it is firmly fixed.
I use it on my Insta360 X3. (I'm planning to buy Ace soon, so I'll use it there as well.)
With X3, the position is so delicate that it just hits the chin of the full face, so I think other ActionCamera would have no problem at all,
The Camera is easy to put on and take off, and since it has two clasps, the Camera will not be upside down as is often the case with products that hang from the neck.
The fact that it is an official Insta360 product is also a reassuring factor.
It can be used for walking around town or in the mountains, except for motorcycle, and since the price is only 3,000 yen, one can be used for various situations and is very cost effective.
View detail
SHOEIHelmet changed from X14 to X15
I purchased a new bracket for my helmet because I changed my SHOEIHelmet from X14 to X15 (see photo). This manufacturer has a reliable supply support system, even down to the smallest parts. View detail
SS is difficult to find a place to install
I had not been able to find a place to install the Body, so I left it for a while, but then I got up the nerve and started installing it. (This is the first time for me to install the driver's recorder on a motorcycle.)
Others have it tucked under the RearSeat but I have moved the ETC there so I can't install it.
In the end, the bracket was made to fit under the front seat.
This is because the 22SeriesBody's small type contributes to the large size, and it would have been difficult to fit it neatly in the 21Series.
The FrontCamera is mounted inside the duct to avoid contact risk when stroking and reflecting the surroundings.
Since I am not sure about double-sided pasting, I fixed it with Option EDR-P05 and the Bracket that I created.
This is thanks to Small TypeCamera and the nifty Option.
The RearCamera is also mounted on the side of the Number with the Option EDR-P04, considering the reflection of the surroundings and how SMART it is when mounted. (The bracket is too firm and heavy, so the Fender Eliminator in particular needs to be reinforced to prevent shaking.)
The Switch is installed by modifying the Switch stand of another product.
Since the switch is a Small Type, it can be attached to various places, but I think it is better to attach it to a place where it can be pushed immediately.
(Also check the operation with the light on.)
The GPS is mounted inside the Tail cowl and is received with no problems.
Camera adjustment is done with the MotoDR application, but it is also easy to use and is Large sturdy because it is wide-angle, especially if the level is firm.
The driving image seems to compensate for some blurring and looks solid and clean.
(Wi-Fi confirmation is said to be time consuming, so playback only on PC)
However, SS is easily affected by the road surface, so fine pitching on rough surfaces is not an option.
How did it feel to wear it?
The use of the Exclusive Bracket for the vehicle type and the space to easily handle the wiring of the body installation location and excess camera etc. makes it possible to install in a couple of hours even if you are concerned about the finishing touches.
For cars without Space, it is necessary to work with a sufficient amount of time, considering the prevention of Trouble.
The Microphone does not have wind cutting sound, and there is no discomfort at all when listening to it.
The price is high, but there are Merit models with GPS, which automatically set the clock and date and time, and have an app to check the running track and speed, among other things.
I have never purchased Large Land products because I am afraid of them, but I expect them to be durable, especially since they are made by Mistuba Sankowa.
I would recommend this product to anyone who is considering purchasing a DriveRecorderー.
View detail
Trusted Mistuba
[How is it used?
Mainly used for touring
Was the one you received as per Image?
Street Image
How was your experience with it?
I chose this MITSUBA product because of its compact body and reliability in case of emergency, but the Camera is the latest. (Equipped with STARVIS) I am a little dissatisfied with the fact that it is not. However, the recorded picture quality is fine.
[Points to note]
Since the Body is Compact, I don't think there will be any trouble mounting it.
How did it compare to other products?
We compared it with DAYTONA's M820WD, but there was no decisive advantage and we chose it because of the manufacturer's preference.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
OEM Parts.
The battery was bulging due to age-related deterioration.
Refurbished to new replacementBattery.
It can be used without any problem.
View detail
It was also available in TANAXSMARTRideMonitor!
I was worried that it would not attach well because it was said to be compatible with KIJIMA AD720, 1080J, Mistuba, and Sankowa EDR-11, 21, and 21G cameras, but I bought it for TANAX SMARTRideMonitorAIO-5Lite's RearCamera. I was able to install it without any modification.
The Bracket itself is thick, so it seemed solid and hard to shake.
It is a Recommendation because it can be installed Refreshing without Camera's pedestal.
View detail