Reviews
![[Mr Quick] Taillight Garnish](https://img.webike-cdn.net/catalogue/images/132620/mr19-mo02-01_TS.jpg)
Easy to customize
Double-sided tape is all that is needed, so anyone can easily attach it.
The price is cheap, so I bought it thinking it would be okay if it failed, but it feels and looks great!
View detail
The classic European Blinker
This is a replacement for an OEM Blinker. I am satisfied with the stylish look. View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
I changed the look to a more modern look.
After 9 years of purchase, I changed the Blinker from Orange bulb to LED + Clear cover to match the LED + Clear cover of the Tail lamp. The price is a bit expensive at 10,000 yen, but it comes with Relay, so I guess that's about the same.
when Blinker is not attached. [Color] Clear is clean and Refreshing and I am satisfied with the aim.
ZX14R is very troublesome because the cowl has to be removed from both Front and Rear to replace the blinker valve, but I am used to this after installing other parts many times, so I can forgive it. (Plug replacement is the real work from here, and it is a very large change.)
It might be a bit challenging for someone removing Cowl for the first time?
It was worth the effort to replace it.
View detail
I'm just pimping...
[How is it used? Town ride
Was the one you received as per Image? It was a little different.
Was the installation difficult? Simply replace the Connector and you're done!
How was your experience with it? The light went from a light bulb color to a white light color like a White color fluorescent lamp, and the light was confirmed to be lit well even in daylight.
[Included Parts:were they on? Two Tie Wraps in Black for outdoor use
[Was there anything that disappointed you? Quantity of claws to fit into the insertion slots.:Pair (for Left and Right) Wiring is oriented in the same direction, so depending on the direction, the wiring is short and may interfere with the cowl, so care must be taken when routing the wiring.
Replacement of ▼Lamp requires removal of the exterior of the car body, No.2 long and short +Driver, M10φ? SocketLunch.
View detail
The quality of the product seems good.
We chose this product for the purpose of dress-up because the OEM headlight is a little dark.
Considering the power consumption, we used LEDs from Sphere Light instead of Halogen bulbs from Included Parts to improve the appearance and brightness.
As for installation, I think it would be easy if you read the Instruction Manual carefully.
However, the optical axis adjustment is Quantity:Pair (for Left and Right) The LED bulbs can be adjusted in terms of brightness, so it is now possible to upgrade the level from the OEM product.
I think it is possible for those who are considering purchasing this product since it was not chosen for the old corporate style but for the purpose of increasing brightness.
Please note that this is a personal opinion and should be used only as a reference.
View detail
It is a good item
Used for SUPER CUB 90 which was converted to Battery reply.
When waiting at a traffic light at an intersection, the blinker stops blinking when the headlight is turned on and the brake is applied,
Switching to this product helps because the Blinker blinks properly.
Simply remove the Tail lens and replace the Valve.
It is brighter than the Normal valve and eliminates Valve breakage, so there is one less cause for concern.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI W800, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ, KAWASAKI W650, KAWASAKI W400
Great quality but
Products to buy together You can just use some electrical tape wrapping the rod, but little lose on Doremi LED blinkers. View detail
If you are looking for LED Blinker, this is the one.
It comes with a conversion connector so I can just replace the OEM blinker relay and not have a high flasher. View detail
It is moderately small and good!
It is moderately small and suitable for mounting on NumberSIDE. View detail
I was looking for something like this.
It was needed for Blinker installation. View detail
![[Highsider] Turn Signal Proton TWO](https://img.webike-cdn.net/catalogue/images/129660/17308_TS.jpg)
Small and wonderful.
Blinker is better for Small. View detail
It got brighter.
Replaced Headlight Bulb on Z125PRO.
The purpose was not only to make the engine brighter, but also to reduce the load on the battery (power saving). The Z125PRO had LED lights from the beginning, so there was no need to replace the tail lamps. I thought about replacing the blinker light because it has a normal bulb in it, but I decided not to do it because the blinker relay seems to be built into the meter and it would be complicated to change it to LED. This time, I decided to replace the Headlight Bulb and the Position Lamp with LEDs, and for the Headlight, I chose this product, which was the cheapest among the Sphere Light products.
The replacement work was as simple as removing the headlight cowl and replacing the valve with the original one, and since the valve is compact, there were no problems with installation.
As for the feeling of use, the light is bright enough and feels very bright, probably because the light is whiter. I was able to drive safely at night. I was not bothered by the dispersion of the light. Unfortunately, there was not enough of an energy saving effect that I could really feel.
Compared to when we replaced the LEDValve on our ZRX1100 a few years ago, low-cost products are now on the market, and the hurdle for replacement has gone down. If you are concerned about the brightness of your lights, we recommend replacing them with LEDs.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4)
Mounted on kz900
I changed only the color of the bolt. I would like to change the exterior someday. View detail
Attached to Glass Lens with Cut
I put it on my old CIBIE CutGlass Lens, which is 4500K, but it is not too white, which is good. I heard that cheap lenses may scatter light because they are old, but this was not the case, and it became brighter anyway. View detail
Durability is difficult
It was installed and working properly, but it broke after a period of one month and a distance of about 200Km.
The symptom is that the blinking speed becomes slower and slower, and eventually the light stops blinking and stays on.
Cheap ones are no good. I should have not been stingy and went with KOSO's Relay, which has a proven track record in other Motorcycle products.
View detail
Side bag can be used with the Fender Eliminator as well.
[How is it used?
Mainly used for touring Ninja1000ABS (2014) Introduced in conjunction with LED Blinker
Was the one you received as per Image?
Better looking than Image
How was your experience with it?
Side bag that could not be used with the OEM Blinker is now available because it was set to Fender Eliminator.
[Points to note]
Be careful with the handling & engagement of the RearBlinkerLEAD, the workability was not good due to the structure of the body side.
How did it compare to other products?
No comparison at this time
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
There is a gap on the License Plate side where the LEAD is taken out, so I was worried about flooding, so I used SiliconBond for Simple Waterproofing.
View detail
Friends of Headlight Transplant
[How is it used?
The socket shape was different from the one used for the Headlight porting of another car model.
It fit into the terminal without any problem and finished beautifully.
Since it is conformed with a so-called "U" shaped triode terminal, items can be applied to a wide range of applications.
View detail
Explosive light, but not compatible with Off-roadFender
H4 Valve replacement Type, so replacement is easy.
Valve size is the same as Halogen bulbs, so there is no need to worry about replacement work.
After installation, the impression is bright! Super bright! It's super bright!
It also reduces power consumption, which is essential for TRAIL vehicles that turn the Cell many times on forest roads.
It may be due to the brightness, but it seems as if the light is diffusely reflected upward by the Fender.
I think it may be due to the Decal, but there is more light in the upward direction, which cannot be managed by optical axis adjustment.
Not enough to adversely affect oncoming traffic, but enough to require a little care in making adjustments after installation.
View detail
For LED bulbs
I was using a PMC blinker relay and suddenly the blinker stopped blinking and when I remove it and shake it, it makes a rattling sound….
I purchased the Blinker Bulb to use LED while replacing the Relay.
Incidentally, the Blinker Bulbs are Stanley Electric's CA4887M and CA4587M.
Originally, there were two Relay units attached, but even with only one, both Blinker and Hazard are working without any problems.
It is made by DAYTONA, a reliable company, so I do not think it will break in a short time.
View detail
Fits: DUCATI PanigaleV4R, DUCATI PanigaleV2, DUCATI PanigaleV4, DUCATI StreetFighterV2, DUCATI StreetFighterV4
Compatible with DucatiPerformance sequential blinker
This is the parts to change when using DucatiPerformance's Blinker with AELLA's Fender Eliminator Kit.
BlinkerQuantity:Pair (for Left and Right) The long hole for adjustment can be set to the Largeest value, but the image is still used for the License PlateQuantity.:Pair (for Left and Right) The Blinker is just visible from the
View detail