Reviews
Fits: SUZUKI GSX400, SUZUKI GSX250 E Goki, SUZUKI GSX-R400, SUZUKI GSX250 L, SUZUKI GSX250 FW, SUZUKI RG250 γ, SUZUKI GSX400
I've been hit.
It broke on the second Touring.
By the way, the mileage is about 400 km.
I think 90 days is too short a guarantee.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
the same as it was reputed to be
As per other reviewers, it's still difficult to put it up.
The Exclusive Design and Just Size are not tolerant of mistakes, and even if the center part of the main body can be managed, it is very difficult to put the thin and round surrounding parts in the right position.
Seat was thin and stretched when working with it... I was out of my depth.
View detail
Fits: HONDA CB 500 , HONDA CB 500 , HONDA MTX 125 R , HONDA MTX 125 RW , HONDA NPS 50 ZOOMER , HONDA NX 650 DOMINATOR , HONDA NX 650 DOMINATOR , HONDA XL 250 R , HONDA XL 250 R , HONDA XL 600 V TRANSALP , HONDA XL 600 V TRANSALP , HONDA XLR 125 R , HONDA XRV 750 AFRICA TWIN , HONDA XRV 750 AFRICA TWIN
Only for Rear
The OEMFront Blinker has 3 wires, but the product I received has Quantity wires.:There were only 2pcs. obm blinker, both Front and Rear were discontinued, and bellows (?) I would like to see Wiring3 Type manufactured by OEM as well, because the part was deteriorated and torn off. View detail
For Meter Bulb in 6V vehicles
When I went out shopping at night with my Yamaha CHAPPY that I had restored, I could not see the Meter at all and thought it was out of bulbs, so I immediately purchased one.
YamahaOEM Parts are still available, but at a slightly higher price.
I looked up 6V3W and found this product, and since it was inexpensive and in stock, I snapped it up.
10mm BoltQuantity fixing Meter:Remove the 2pcs and the meter cable to access the wiring.
I replaced it and put it back together, and when I started the Engine, the Meter Bulb came on successfully.
Since it is 6V, it is naturally dark, and to be frank, you can only vaguely see the position of the needle when driving at night.
I don't plan to go far, so I'm satisfied that I can see for now.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
I think it's good
The installation itself is easy:remove the OEM and install this Light as is. There was no special modification. The glass surface of the Headlight looks like this, [Color] Now that it is Clear, I think it looks pretty cool. The brightness is not as bright as the OEM light lens, but the light distribution is more variable, and with the LED bulbs, it seems to be bright at a single point. View detail
Gamaguchi Clip
The clips are too large for motorcycles and may or may not bite, depending on the type of car. Also, I think it depends on how long the battery lasts. View detail
Fits: BMW S1000XR, BMW S1000RR, BMW S1000R, BMW C400X, BMW F900R, BMW F900XR, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250GS Adventure, BMW F850GS, BMW M1000RR, BMW M1000RR, BMW F900GS Adventure, BMW M1000R, BMW F900GS, BMW F850GS Adventure, BMW R1250R, BMW R1250R, BMW R1250RS
What is the cospa?
It takes less than a minute. Just snap it on. The effect is good. However, the material and texture are not worth the price. I guess it's just an imported product. Well, it's an imported product, so I guess it can't be helped. View detail
Fits: YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
Blinker replacement changes appearance
I am satisfied with the material, good texture and smooth installation. View detail
Hazard added to XSR125; XSR's Blinker line was a Bullet Terminal from the start
I bought this to add a Hazard switch to my XSR125.
In light of future BlinkerLED, we decided to use DAYTONA's Blinker relay with Hazard function, which is compatible with bulbs & middot; LED.
For XSR125, the interrupt to BlinkerWiring is Large sturdy without processing.
The work procedure is
0.Prepare a DAYTONARelay and Hazard switch (that can be On and Off).
1.Remove the Seat.
2.Remove the Tail cowl.
3.Remove the blinker relay located forward under the Seat and install the DAYTONA Relay.
4.Interrupt BlinkerWiring in a cohesive Wiring behind the bottom of the Seat.
Connect DAYTONARelay's Orange to XSR's Brown line and sky blue to the Green line.
The XSR125 is a Bullet Terminal from the start, so it can be connected without modification.
5.Connect the prepared Hazard switch and DAYTONARelay Red?Black wire with Bullet Terminal processing.
6.Turn on Hazard switch and check operation.
7.Once confirmed, fix the Hazard switch and return Seat Cowl and Seat to their original settings to complete the process.
The work takes about one hour.
Electric Works Pliers or Wiring Connectors are required to connect the hazard switch for Bullet Terminal processing.
View detail
Outstanding brightness
I don't think you can go wrong with any of the Sphere Light series.
Again, I am satisfied.
View detail
Fits: HONDA APE, HONDA BENLY50, HONDA DAX, HONDA MONKEY, HONDA CT110 HUNTER CUB, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA CL400, HONDA FTR220, YAMAHA SRV250, YAMAHA RENAISSA, YAMAHA BRONCO, YAMAHA TW225, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, SUZUKI VANVAN, SUZUKI GN125, SUZUKI GS125, SUZUKI VOLTY
Not very good
The paint on some of these has a bumpy texture, like the units weren't clean when the paint was applied. One of them had an electrical short upon installation which was popping my signal fuse. Luckily I had bought a spare. Installaton wasn't a big problem, but I wish they used thicker gauge of wire, it's very thin. Very inexpensive blinkers, but you get what you pay for. I wish I had spent a little more and gotten better quality blinkers. View detail
Fits: Others
For charging smartphones
I put it in for powering my smartphone and a separate ETC. Maybe it is because my motorcycle is old, but DAYTONA products always give me a hard time. View detail
Repair Parts was a great help!
I broke and obtained the already discontinued Square LCD Speedometer & Tachometer's Gold Genus Reactive Speed Sensor.
I am glad to hear that you are now safely posting speeds.
View detail
Fits: TRIUMPH Scrambler 400 X, TRIUMPH Speed 400
A spare Film is also included for your peace of mind.
The size of the meter panel can be set to "Exactly" for easy operation. You can also have a spare quantity in case of failure.:It is safe because it comes in 1 pc. I have not been able to find the Meter panelProtection film anywhere else. View detail
Installation on the XSR125 was easy.
Since XSR125 does not have a hazard switch, DAYTONA Relay with hazard function was selected in consideration of future Blinker LEDs.
BlinkerWiring on XSR125 is located under the Tail cowl and is a Bullet Terminal.
View detail
Good
Adaptations had to be made so that the front lights could flash intermittentlyAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Fanless LED
This LED is perfect for vehicles without the space behind the headlight, which is unique to off-road vehicles.
Almost the same size as OEMHalogen, so it can be installed without any problems.
View detail
There is an initial defect
Brand reliability was also high, so there was an initial defect and it was Shock.
It is our fault, but unfortunately we are crying ourselves to sleep because we could not contact the company within the return period.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX750RR, SUZUKI GSX-R1100
M-TEC's Reprinted Parts
GSXR750 Oil Cooled Initial Model 1985s
OEMParts was discontinued and M-TEC re-released it with reissued Parts, so I bought it as StockParts. Thank you very much.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail