Reviews
!!! Backbone Frame needs attention!
In case of an accident, install the Engine slider MORIWAKI Skid Pad recommended by the dealer first. I put on the engine slider MORIWAKI Skid Pad, which is recommended by the dealer, first, in case the engine slider falls over, but it is not as strong as the Engine Guard. The Bolt entered the gap and damaged the screw hole by 3mm, and I had to repair the new car with Tap. The CB1000R had a mono-backbone frame, and the technology of frame simulation by computer analysis has made a great leap forward in the past few years, analyzing even the point where the frame bends, and then developing an engine fastening method and pivot plate installation structure that does not interfere with that bending. The engine is suspended from the frame like a spine and is held in place by six bolts. I was stupid, but I wanted at least a warning in the instruction manual. Slider installation was completed. I doubt if this will protect the body from tipping over, but I hope it will prevent at least a standing fall. View detail
lightech frame slider
I purchased a frame slider to mount on R1.
I purchased it as a Lytech product.
It's good for shock absorption and I'm very satisfied with the design.
I think the quality is good and it's easy to install. I think it's good for decoration because there are parts that can add additional colors. -------------------------------------------------- -------- I bought a frame slider to be installed in Al -One. I bought it as a Litech product. It is also good for shock absorption and the design is so satisfying. The quality is good and it's easy to mount. There are parts that can add additional colors, so it seems to be good for decorating. Powered by Google Translator
View detail
Fits: KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI ER-6n, KAWASAKI ER-6n, KAWASAKI ER-6n
Genuine R&G Classic Style Crash Protectors for Ninja 650 2007
A friend of mine asked about what was good crash protection for their pride and joy of a Ninja 650 2007, obviously, with keeping to the style and age of teh bike, I suggested these from R&G. No problem, Webike had these in stock and about the same cost as locally. Unfortunately, I could not source locally as they were put of stock. With a few other parts I placed the order to ship altogether by EMS. My order arrived woth everything in order in 5 days from shipping. The package was well protected with everything secured in bubble wrap. The crash protectors came in their own packet anyway which stopped any damage during transit. These crash protectors are made from some composite material that have a good abrasive resistence if teh bike slides and also some cushioning to help protect the bike's fairings etc. Very well made by a good old British company. The finish is second to none, the protectors are well made and come with all the necessary bolts you need to fit. Super easy to fit but make sure you have some blocks underneath the engine just in case and also, just do one side at a time. I know having used these many times before that they work exactly how they should. One very happy custoomer. Thanks Webike. View detail
PlateOnFrame Slider
I chose PlateOn instead of direct mount in the hope that the frame would be less affected in the event of a fall, although I don't know how much it would affect the frame. The base plate is now accented with silver, which is cool. View detail
T9GT engine protector
Install engine protector on my bike. Material was sturdy and fits well, giving added protection on my engine in case on accidently drop. View detail
Easy installation
Simply remove the Bolt from the vehicle body side, replace it with the supplied Bolt, and install the Base.
I don't know because I don't want to demonstrate the effectiveness of the system, but I think it will work reasonably well in case of an emergency,
View detail
It is what it is
[How is it used?
Fitted due to risk of falling due to paralysis of the left hemisphere
Was the one you received as per Image?
As per Image
Was the installation difficult?
Anyone with tools can do it,
How was your experience with it?
I don't know because I haven't fallen over, but it is designed to absorb shock in two stages so that the impact is not heard by the Frame.
[Included Parts:were they on?
Sticker is attached.
[Was there anything that disappointed you?
In the event of a fall, the SliderBody is likely to collide with the Silicon rubber before the shock-absorbing Silicon rubber.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Easy installation with 8Millimeter long socket wrench
The car stalled at the start of the left turn from a stop, and although it lost its balance and held on, it was a bit of a slow start, and after the Adrenaline explosion, the car was easily lifted from the ground and various body checks were performed at a nearby parking lot. Damage was limited to a small scrape on the cowl and exhaust system and a fracture on the leftfootpeg, coupled with the effects of the AGRAS racing slider.
For now, Slider is going to be lightly adjusted and reused.
GSX1300R HAYABUSAOwners should definitely consider this Slider!
View detail
Fits: TRIUMPH Speed triple, TRIUMPH DAYTONA955i, HONDA VFR1200F, HONDA CBR1100XX, HONDA CB900Hornet, HONDA CB600F, HONDA CB500X, HONDA CB500F, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CB650F, HONDA CB650R
Standstill Backup
When parking the car, it fell over and broke Babyface's Slider,
The Crank Case Cover, Under Cowl and Exhaust System were scratched.
I did not expect Slider to break,
I put on the Timing Hole Plug for a double measure.
It is quite expensive, and if this gets damaged, that would be sad,
I feel it would be cheaper to replace the Crank Case Cover.
However, I think the pointing color of Orange works well and tightens up the Cover area.
View detail
No exterior processing is very good!
Installation was done by RB at the store of purchase.
Looking at the manual, it seems that it is not a difficult process as long as the exterior can be removed beautifully.
When I checked the finished product, there was no problem because of the cushion material even if it was touched a little while there were individual differences, and the owner only has to show his/her technique not to be choked.
Well, I don't know about cospa, I don't know.
View detail
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX SE+(ZX1002DKF), KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SX SE
Easy to install
The instruction manual is easy to read and even beginners can easily install the system.
Torque wrench is required, so I'm not sure I'd want to not have it.
View detail
It is safe to say that both are held back by Shaft.
Quantity to Body:Pair (for Left and Right) If the model is installed separately, there is concern about damage to the crankcase in the event of a fall, but the Striker model makes good use of the extra white space above the engine to allow the shaft to pass through. The Striker model, however, uses the extra white part on the engine to pass through the shaft, so that the damage can be released even if the engine falls over.
As expected, we have not checked by intentionally tipping it over, but it seems that the cone protrudes out of the Cowl moderately well and seems to reduce Damage to the Cowl & Engine in a good way.
View detail
Repair
I am embarrassed to say that this is a replacement due to a standing blockage.
When ordering products, you can choose which Shop you would like to have installed.
After that, the installation process is completed with only a few email exchanges. As for the product, it is well packaged and I have nothing to say.
View detail
It was installed beautifully.
I bought it because I was afraid of standing up, and I mainly just want to remove the Cowl, but the installation was done by RB ….
I am happy that I was able to install it without any modification, but I wonder how much protection it actually provides. But I wonder how much it can actually protect me.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT Edition
Simple
I was looking for something Simple and inexpensive with text and WITHOUT Logo and came across this.
Can be installed on zx4r with no problem and Cowl can be removed.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
Don't fall down.
Engine, FR/RRAxle, ClutchBox, Generator, etc.
There are various types of sliders and guards, but this time we installed a guard on both sides of the engine.
I don't want to test the effect too much, but first of all, I think it will be grounded first because it sticks out more properly than EngineUnit.
The foundation is made of Plate and Pipe of the genus Gold, and is attached to the frame, creating a certain degree of rigidity.
In addition, the gold plastic finisher with the Yamaha logo and the decorative spacer reduce the ruggedness that is often seen in the Guard and make it a stylish Yamaha-like product.
I don't want to be a burden to you, but I think it is a good choice to stock up on them as a fallback plan.
One point, the bolt at the stopping point on the front side of the vehicle may need to be Torque managed properly.
Incidentally, there is another YamahaOEM in the shape of a starfish, which is also a Quantity:I think it will be even more prepared if it is attached with a Set.
View detail
Good design and practicality
I had it installed when I took delivery of my car.
It has a sense of quality and solidity.
I think it is thick enough to protect the Case. I have not actually tipped it over, so I am just guessing.
I think the design is also good. I was very confused between YOSHIMURA and Red, but I could have chosen Red, but I had to wait for 3 weeks, so I chose Gold which was in stock.
The GSX1300R HAYABUSA is impossible to bank this far.
View detail
Included Bolt
Please use Stainless Steel for the attached Bolt. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Frame Slider
The texture is good, easy to install, and the large size is just right. View detail
Fallen cannibals
The pedestal is rugged, but it is attached at a position where the Damage does not go directly to the body of the vehicle at the tipping angle.
Quantity:Pair (for Left and Right) Asymmetrically, there may be a preference for or against, but it seems to serve the role well enough.
View detail