Reviews
I needed a Long.
Purchased because Long was needed due to installation constraints.
I'm thinking it's a waste of Race ish with Hole, and I'm not sure I'll see it later.
I may replace it with another one at some point.
View detail
Purchased as a spare
I bought this as a spare when replacing the Clutch master.
I didn't have to use it as a result, but it's a good idea to have it ready along with Washer.
View detail
Could not be used (MT-25/Brembo P4-40C)
I used it to replace the front brake caliper with a Brembo P4-40C on a MT-25 (2016/ABS no ABS) with a Normal Brake line, but it was too long under the neck and bottomed out. It is very difficult to clean the caliper because of the shavings left by the bolt.
I bought a Banjo bolt 992-03-31SCBK from active in a hurry and was able to get away with it.
I wanted to have information on compatible banjo bolts in the description of Caliper, since the one I bought as an alternative was unusable because Brembo's OEMBO banjo bolt was out of stock.
View detail
Easy to work with
Makes the work easier
If it's easier at this price, it's Recommendation!
View detail
In the course of Caliper replacement
[How is it used?
In the course of Caliper replacement
Was the one you received as per Image?
Yes
Was the installation difficult?
Simply replace Caliper accessories
However, I don't know the torque for tightening the Titanium, it is just a brake, so I asked PRO to do the installation work.
How was your experience with it?
I like that it doesn't seem to rust.
[Was there anything that disappointed you?
I wish it had a reference value for the tightening Torque.
View detail
Stainless banjo
Purchased for cb400sf Rear brake
It's well made and looks Parenthesis good.
View detail
Banjo bolt of bremboType with exquisite length
The bremboType Banjo Bolt will be required when replacing with an external master such as GALE SPEED or brembo. bremboType bolts are slightly shorter than the normal ones. If you have fluid seepage, it may be a good idea to reconfirm the length of the bolt. View detail
Stainless Steel
The quality is satisfactory with reliable Stainless Steel. View detail
Stainless Steel
Banjo and Quantity:Purchased the set. I am satisfied with the quality. View detail
Stainless banjo bolt
Material:Stainless SteelBanjo bolt
Do not rust Material:Purchased Stainless Steel
I'm replacing it for the purpose of dress-up, so it doesn't improve performance, but it does motivate me.
View detail
DoubleMountBanjo bolt for Nisshin caliper
DoubleMountBanjo bolt for Nisshin caliper
It is for Nisshin caliper and cannot be used for Brembo caliper.
I'm a little disappointed that there is no for Brembo.
It is necessary when Brake hose is made into h-type.
View detail
Required for brembo products
What made you decide to buy?
The brake reinforcement that I have envisioned since I took delivery of my ZX-6R!
[How was the installation?
The banjo bolt that comes with the Brembo caliper cannot be used with the buildaline because the thickness of the banjo adapter is different. The banjo bolt supplied with the brembo product can be used with the OEMBrake Adapter.
When replacing the Brake Fluid, be careful not to touch the Cowletc. with your hands because the Brake Fluid will damage the painted surface. In case of emergency, we recommend that you store water in the bucket and wash the Fluid after touching it! We recommend that you wash the Fluid after touching it.
Please note that there is a law that states that only the owner of the motorcycle or a licensed mechanic can perform maintenance and parts replacement related to the brake. I am a former Owner." Please use this as a reference only, as we have performed maintenance on the
View detail
Required for brembo products
What made you decide to buy?
I have been thinking about strengthening the brake since I took delivery of my ZX-6R!
[How was the installation?
The banjo bolt that comes with the Brembo master cylinder and Caliper cannot be used with the buildaline because the thickness of the banjo adapter is different. The banjo bolt supplied with the brembo product can be used with the OEMBrake Adapter.
When replacing the Brake Fluid, be careful not to touch the Cowletc. with your hands because the Brake Fluid will damage the painted surface. In case of emergency, we recommend that you store water in the bucket and wash the Fluid after touching it! We recommend that you wash the Fluid after touching it.
Please note that there is a law that states that only the owner of the motorcycle or a licensed mechanic can perform maintenance and parts replacement related to the brake. I am a former Owner." Please use this as a reference only, as we have performed maintenance on the
View detail
Stainless Steel
Material:I had been using an AluminumBanjo Brake hose, but I heard that it could break with the slightest impact, so I purchased this product in conjunction with the change to SteelBanjo.
Rear brakeCP2696, but Thickness:The Bolt bottomed out with a 1mm Crash washer, so we were able to install it using a 2mm thick one on the Caliper side only.
You can drive with peace of mind.
View detail
OK, I think it's good.
Choose Stainless Steel with BrakeOIL, which is resistant to corrosion!
It is also recommended to use Stainless Steel for the Hose side.
Brembo calipers for Yamaha cars do not have a fine screw pitch.
Be careful when ordering!
View detail
For Brembo caliper
Installed on a Brembo caliper.
It has been installed without any problems. 。
The price is reasonable for one thing, but I'm not sure if it's too cheap, so I think it's just right.
View detail
Upgraded Stainless Steel Banjo Bolt for the Grom
About quality and texture: I am happy with the quality of the banjo bolt from HEL, made from stainless steel and sized in M10 with a metric thread pitch of 1.25. Nice that new copper sealing washers are also included. About the feeling of use: Previous owner of my Grom reused the OEM banjo bolts when installing stainless steel braided brake lines and the addition of the HEL stainless steel banjo bolts has now completed this upgrade. They look perfect with their slim design and wonderful surface finish. Products to buy together: Some stainless steel braided brake lines would also be desirable to purchase along side the stainless steel banjo bolts and HEL also have these on offer here on Webike. Difficulty of installation: The process to install takes about 30 minutes, position some rags to soak up any brake fluid that may leak out when the old banjo bolt is removed and install the stainless steel banjo bolt with it's new copper sealing washers and torque down to 34N m. I also bled the brake line to ensure no air was introduced into the system during the replacement. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a durable stainless steel banjo bolt as compared to the aluminium banjo bolts on offer from the majority of the companies and at no significant price difference. About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: There are numerous designs, sizes and thread pitches available in banjo bolts so be sure to research and purchase the correct ones to suit your motorcycle. View detail
![Banjo bolt [Campaign eligible products].](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0228/24099162_1_TS.jpg)
Hydraulic Clutch side
I used it on my Clutch Side and it was the best one I could find, although I had to buy a new one because there were only 1.25 ones. View detail
for Brembo
Caliper from brembo has a different Screw Pitch than Nisshinetc. so I have to buy this one.
I appreciate the fact that it has a Copper Washer for what it's worth.
View detail
Air-Free Banjo Bolt Single
[How is it used?
Used for GALE SPEED's Rear brake master.
Was the one you received as per Image?
It is aluminum, so it is light, but it feels cheap compared to Stainless Steel.
Was the installation difficult?
Simply install it in place of the banjo bolt.
How was your experience with it?
Although it is possible to bleed the air from the rear brake without using a separate brake, it is more efficient to use a brake with air bleed.
[Was there anything that disappointed you?
The cap is crappy. However, it is cheaper than Stainless Steel, so it can be a compromise.
▼
Because it is aluminum, unlike stainless steel, it will crack if too much torque is applied.
View detail