Reviews
Fits: HONDA CB400SF, HONDA CB400SB
MORIWAKIShort TubeFlange
One of the four I ordered had to be shaved a little to fit, probably because of the BALI. For some reason, one of the bags was also in a different bag. View detail
MORIWAKI split collar
I ordered this due to the loss of my cracked collar. After installation, it was perfect. View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400, KAWASAKI GPZ400F, KAWASAKI Z400FX, KAWASAKI Z400GP
cheap
OEM Product was dirty for Large, so it was replaced.
No problem for use
View detail
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1100
Green Light on ZrX1200R
It is a part that cannot be seen, but it can be glimpsed, so there is a sense that it has been installed.
I used OEM because the Flange nut that came with the product would scratch it.
View detail
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1100
Custom in Hidden Places
It's a place you have to look closely to see.
Self-sufficient Parts.
NORMAL rusts immediately after polishing.
This Parts will shine if you polish it.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100
U-KANAYA Aluminum Cut-out Exotic Tote Flange
I had a hard time deciding between Kfac and Eukanaya, so I decided to go with the less expensive Eukanaya. I used to have a cheaper Flange with aluminum plating coating, but after 5 years of use, the plating was peeling off and it looked a little rusty, so I decided to use aluminum cut-outs this time. I will attach a photo so you can judge for yourselves! View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, YAMAHA XJR1300, YAMAHA XJR1300, KAWASAKI ZRX1200, YAMAHA XJR1200, KAWASAKI ZZR600, KAWASAKI ZZR1100, KAWASAKI ZZR1100, KAWASAKI ZX-10, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI GPZ1000RX
Good color
Both OEM Flange and Nut were covered in Red rust, so they were replaced.
StainlessNut is easy to gnaw, so the attached Nut is Material:The product was replaced and implemented in Titanium.
View detail
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1100
Exhaust flange cleaned!
So clean and nice!
It is easy to install and the visual of the ZrX1200 DAEG has been further improved.
I'm uploading a video, so please watch it!
https://youtu.be/IfvJK13nw6I
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R
The color...
I ordered the Black and the Black arrived.
I installed it and while using it, the heat? discoloration.
Now it is a bright Orange color.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Chrome is beautiful.
The existing exhaust flange was badly scratched and dirty, so I replaced it as Refresh.
To be honest, I wasn't expecting the texture, but I was surprised at how beautiful Chrome is.
Of course, functioning as Flange is not a problem.
It is less expensive than other similar products, but I was satisfied because Chrome is beautiful.
View detail
Fits: HARLEY-DAVIDSON Low Rider Sport FXRS-SP, HARLEY-DAVIDSON Super Glide FXD35, HARLEY-DAVIDSON Electra Glide Police FLHTP, HARLEY-DAVIDSON Electra Glide Ultra Limited Low FLHTKL, HARLEY-DAVIDSON Road King Custom FLHRS, HARLEY-DAVIDSON Dyna Glide Custom FXDC, HARLEY-DAVIDSON Softail Heritage Classic EFI FLSTCI, HARLEY-DAVIDSON Low Rider Chrome FXRC, HARLEY-DAVIDSON Screamin' Eagle Road King FLHRSE-I, HARLEY-DAVIDSON FXR 3, HARLEY-DAVIDSON Screamin' Eagle Electra Glide FLHTCSE, HARLEY-DAVIDSON Low Rider Convertible FXRS-CONV, HARLEY-DAVIDSON Sport Glide Grand Touring FXRD, HARLEY-DAVIDSON Softail Rocker C FXCWC, HARLEY-DAVIDSON Electra Glide Standard EFI FLHTI, HARLEY-DAVIDSON Electra Glide Standard EFI FLHTI, HARLEY-DAVIDSON Softail Low Rider ST FXLRST, HARLEY-DAVIDSON Softail Low Rider ST FXLRST, HARLEY-DAVIDSON CVO Electra Glide Ultra Classic FLHTCUSE5, HARLEY-DAVIDSON Softail Night Train FXSTB
I'm happy with the texture of Stainless Steel.
I'm very happy with the quality of the stainless steel look and the machining accuracy. View detail
Fits: HARLEY-DAVIDSON Softail Springer Classic EFI FLSTSCI, HARLEY-DAVIDSON CVO Electra Glide Ultra Limited FLHTKSE, HARLEY-DAVIDSON CVO Electra Glide Ultra Classic FLHTCUSE4, HARLEY-DAVIDSON CVO Fat Bob FXDFSE, HARLEY-DAVIDSON Sportster 1200 XL 50, HARLEY-DAVIDSON Screamin' Eagle Road Glide FLTRSE-I, HARLEY-DAVIDSON 1200 Roadster XLR, HARLEY-DAVIDSON Road King FLHR, HARLEY-DAVIDSON Low Rider Sport FXRS-SP, HARLEY-DAVIDSON Electra Glide Police FLHTP, HARLEY-DAVIDSON Super Glide FXD35, HARLEY-DAVIDSON Electra Glide Ultra Limited Low FLHTKL, HARLEY-DAVIDSON Road King Custom FLHRS, HARLEY-DAVIDSON Dyna Glide Custom FXDC, HARLEY-DAVIDSON Low Rider Chrome FXRC, HARLEY-DAVIDSON Softail Heritage Classic EFI FLSTCI, HARLEY-DAVIDSON Screamin' Eagle Road King FLHRSE-I, HARLEY-DAVIDSON FXR 3, HARLEY-DAVIDSON Screamin' Eagle Electra Glide FLHTCSE, HARLEY-DAVIDSON Softail Rocker C FXCWC
Plating with luxury
I replaced the OEM exhaust flange because it was starting to look bad due to rust. The replacement took a bit of time, but it looks great for that. View detail
worst case scenario
I received the product, but the parts I asked for are missing, and they haven't responded to any of my calls, so I'm going to have to make sure I'm delivering it right I want you to do it (?°??°?)
Also, I need a better way to contact you!
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
We can dress-up!
I bought it for Exhaust pipefor Replacement
It has a Chrome finish, so it also has a dress-up effect
It was installed with good accuracy
I was satisfied
View detail
Fits: HARLEY-DAVIDSON Low Rider Sport FXRS-SP, HARLEY-DAVIDSON Super Glide FXD35, HARLEY-DAVIDSON Electra Glide Police FLHTP, HARLEY-DAVIDSON Electra Glide Ultra Limited Low FLHTKL, HARLEY-DAVIDSON Road King Custom FLHRS, HARLEY-DAVIDSON Dyna Glide Custom FXDC, HARLEY-DAVIDSON Softail Heritage Classic EFI FLSTCI, HARLEY-DAVIDSON Low Rider Chrome FXRC, HARLEY-DAVIDSON Screamin' Eagle Road King FLHRSE-I, HARLEY-DAVIDSON FXR 3, HARLEY-DAVIDSON Screamin' Eagle Electra Glide FLHTCSE, HARLEY-DAVIDSON Low Rider Convertible FXRS-CONV, HARLEY-DAVIDSON Sport Glide Grand Touring FXRD, HARLEY-DAVIDSON Softail Rocker C FXCWC, HARLEY-DAVIDSON Electra Glide Standard EFI FLHTI, HARLEY-DAVIDSON Electra Glide Standard EFI FLHTI, HARLEY-DAVIDSON Softail Low Rider ST FXLRST, HARLEY-DAVIDSON Softail Low Rider ST FXLRST, HARLEY-DAVIDSON CVO Electra Glide Ultra Classic FLHTCUSE5, HARLEY-DAVIDSON Softail Night Train FXSTB
It is precise and sturdy
I purchased and installed it as well as Refresh
Except for the part where you attach the Bolt, it is thicker and sturdier than the normal Mount
It was installed with good accuracy
View detail
Almost OEM's Black version
Flange distorted Exchanging the Exhaust pipe became difficult and replaced with this product.
There was no problem with mounting precision.
It is recommended because it is also Accent of One point because the color is Black.
View detail
U-Kanaya Aluminium cut-out exhaust flange
Very nice product, I must say. Made out of aluminium, eloxated perfectly and delivered with a set of nuts needed for installation. In comparison to the original, the U-Kanaya exhaust flanges have higher quality level and they also weight less; exactly 20 grams per flange, which is total 80 grams for 4 exhaust flanges. The assembly with other exhaust parts such as exhaust pipes and exhaust collars is really simple (the flanges are made very precise) and doesn't take too much time. Recommended for the bikers who would like to customize their ride. View detail
I soon got rusty.
I bought it because I lost one OEM Product.
I do not grasp exactly, but rust quickly.
Even if it rusted it can be used without problems, well, I feel like this.
View detail
Fits: YAMAHA GRAND AXIS 100, YAMAHA AXIS 90, YAMAHA AXIS 50, YAMAHA JOG 90, YAMAHA Bw's 50, YAMAHA Bw's 100, YAMAHA ALL 2-stroke VINO, YAMAHA ALL 2-stroke JOG, YAMAHA Bw's100, YAMAHA Bw's50, YAMAHA JOG90, YAMAHA JOG, YAMAHA VINO
I tried purchasing.....
I was curious, I saw this power flange in a certain famous magazine, I bought it expecting from the singing phrase,... Clearly said that wasteful! It was truly deceived in a singing phrase that fuel efficiency and power come out like anything. Please do not let everyone be deceived. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R
Not noticeable, but with flashy eyes
Although it is a less conspicuous Parts, in NORMAL of rust corrosion, I made Gold because it is not good for mental health. Sure enough, I have no idea if I try to be careful (Lol) However, from now on there will be no rust and it is a wonderful thing functionally. Above all, I am happy with the superiority of having good parts
View detail