Reviews
Fits: HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA VFR750F
Side cowl fixed
Side cowl fixed bolt is replaced with a new one.
You will receive a replacement part number:64508-ML7-010.
It seems to be a common part with different part numbers.
The tightening part is still -.
I hope they will sell ?.
View detail
Fits: HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP
Replace with new one
This is a replacement along with Bolt replacement.
It is like thin Packing, but Wound-proof? Prevention of loosening? It is not cheap. It is not cheap.
View detail
Fits: HONDA CBR400RR, HONDA CBR400RR
Bolt
The Right Side fixed bolt is replaced with a new one.
It seems to have been changed to the alternative part number:64508-ML7-010, but the tightening part is still ? shaped.
I would prefer a ?-tightened shape.
View detail
Fits: HONDA NSR50R, HONDA NSR50R, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR
exchange
Side cowl demountable bolt, replaced with a new one.
I would like to have a cross, but it seems that OEM new products are changing to -.
I hope they will change to Cross Type.
View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500
Replace with new one
I purchased this product to replace the fixed bolt in the Tail lamp section.
It seems to be a special Bolt, available at the same HondaOEM, and the price is reasonable.
View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500
Fixing Screw
I bought it to fix the Tail lampFixing Screw on the Rear because it was missing.
HondaOEM and the price was low, so it was very helpful.
View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250
Cowl Fixed Bolt
I thought HondaOEM Product would be a good choice for installation due to loss of Cowl Fixed Bolt.
I don't think it is such a special Screw, but it was expensive for HondaOEM.
View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1 (YZFR1FB), YAMAHA YZFR1 (YZFR1FCB), YAMAHA YZFR1 (YZFR1FCL), YAMAHA YZFR1 (YZFR1FCR), YAMAHA YZFR1 (YZFR1FL), YAMAHA YZFR1 (YZFR1FR), YAMAHA YZFR1 (YZFR1GCGY), YAMAHA YZFR1 (YZFR1GCL), YAMAHA YZFR1 (YZFR1GGY), YAMAHA YZFR1 (YZFR1GL)
Genuine Yamaha Bracket 13 for YZF-R1 2016
This bracket had clearly too some hit as it had snapped near to the engine side. Not a big deal but I did want to replace it for one that will hold the fairing well. Finding the right part was easy using the tools Webike provide and cross referencing with Yamaha schematics. The cost was very good value and less than half the cost of buying locally. With some other parts for the R1, I had EMS ship them all toghether so I would get them all at the same time. In 5 days the order arrived and the parts were perfectly wrapped and kept safe. The bracket itself is aluminium but that does not mean it is not strong, I could barely flex it at all which is good. The bends are all correct and align with the fairing and the engine side. SImple to fit but worth the effort knowing the fairing will stay where it is supposed to . Cheap fix, great part, what more can you want. View detail
Fits: HONDA GL1800BD, HONDA GL1800B2, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800
Replace with new one
The Cowl Fixing Nut was old, so I replaced it with a new one, which was sold by HondaOEM Product and was not expensive. View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB300R, HONDA CB300R, HONDA CB300R, HONDA CB300R, HONDA CB300R, HONDA CB300R, HONDA CB600F
Reliable OEM
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased from an acquaintance was converted to an SC59 CBR1000RR.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
The Grommet is inserted into the mounting hole of the Front Fender. The collar with the brim is then inserted into the front fender and the bolt is used to install the bolt. The installation was very well done, and the OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I'm not sure if I can install it using the Homesen Bolt. So it is better to use OEM Bolt.
View detail
Fits: HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA VFR750R AC, HONDA VFR750R A, HONDA RVF750R A
attachment
The Screen fixation was disconnected, so I had to repurchase and install a new one.
It was helpful to be able to purchase the product from HondaOEM Product.
View detail
Fits: HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F AC, HONDA CBR1000F AC, HONDA CBR1000F AC, HONDA CBR1000F AC, HONDA CBR1000F AC, HONDA CBR1000F AC
exchange
It was off for Screen fixation, so I am repurchasing a new one.
It is sold by HondaOEM Product, which is helpful.
View detail
Fits: SUZUKI GSX-R125 ABS 100th Anniversary Collar
If you do it slowly and carefully, you can do it beautifully!
Cowl replacement done recently.
Not only do we have to replace the Cowl, but we also have to apply the Sticker and Decal attached to the Cowl.
Actually, I failed once. (Laughs)
I would like to write based on my failures.
This is ?Seal→○ Decal.
What is the difference between Seal and Decal?
Seal]
。 Sticker then becomes a more solid Seal.
Decal
Seat is used to reproduce difficult handwritten logos by transferring them onto a model. After the printing and processing processes, the seal is ready for transfer.
Decal is used for motorcycles and cars because of their weather resistance.
If you are confident with your hands, you may be able to paste it as it is, but it is quite risky (laughs).
I would like to introduce a method called water pasting.
How to paste
■What to prepare ■
Mist spray ........ "Water paste" This is done in a manner called 。
It is a wet cloth and can be substituted, but use a misting sprayer as it is by far the most efficient! 。 What you have at home is fine. If you don't have it, buy it.
OK with 100s of them.
○Towel...Large amount of water is produced in water pasting 。 TowelQuantity:1 pc. may not be enough. If you are not sure, buy it! 。 This is also OK with 100 units.
Spatula ... used to remove air and water 。 Fingers can be substituted, but fingerprints will be lost. 。 A spatula will give you a clean finish and make the work faster. But if you try to remove air bubbles with a spatula, you may damage the decal that has been softened by water pasting.
How to paste
1) Degreasing. Remove oil from the surface to be applied with a neutral detergent, etc.
↓
(2) Spray water on both the exterior decal and the surface to be affixed.
↓
(3) Temporarily place and align Decal. (I'm not pushing it yet.)
↓
It is better to use a Towel or your finger to press down from the center to the outside to drain off the water. Worst case, you can reapply if there is still water on the surface (laugh).
↓
(5) Drying. Leave it to dry for 5 to 6 hours in summer, or until the next day in winter. 。 But in the meantime, please check the status of Decal from time to time! 。 Air bubbles may form during the process of moisture loss, or floating may occur if the glue is weak.
↓
(6) Gently peel off the protective Seat over the Decal.
The work itself is not difficult, but it should be done slowly and carefully, taking your time.
My failed Point.
Insufficient ? degreasing.
?I was worried about the air bubbles and overgrew it with the spatula.
→It's not easy, but if you want to get it done quickly, you'll make more mistakes, so take your time and do it right.
View detail
Fits: SUZUKI GSX-R125 ABS 100th Anniversary Collar
If it cracks, it is wise to replace it.
The other day I got carried away... and fell to my feet (laughs).
I tried to repair it, but gradually I started to hear a buzzing sound at high RPM, and I was worried that it would not be able to withstand the vibration, so I replaced it. 。
Left Side upper part.
This vehicle will be a Full Cowl vehicle.
What is Full Cowl?
It looks sporty and looks how fast it is, but what is Merit and Demerit?
[Merit]
◎High aerodynamic performance allows the car to efficiently catch the driving wind behind it when driving at high speeds or riding for long periods of time, reducing fatigue. 。
◎Styling-wise, Full CowlMachine has a Sporty Sporty Style and looks good. I→d prefer it, though (laughs).
◎Protect your body from precipitation and insects.
Since motorcycles are exposed to the rain, the Cowl reduces the area where the body gets wet somewhat. 。 It also protects me from flying insects and Garbage from the front.
◎Engine protection in the event of a fall.
If you fall down without cowl, you may injure the crankcase etc., and the cost of parts around the engine is quite expensive even if the engine is traumatized... This is the case with Racer and others.
[Demerit]
▲Sensitive to strong crosswinds.
Full Cowl is strong against wind from the front, but its weak point is crosswind 。 The cowl makes it more susceptible to crosswinds, which is not a problem for a sturdy vehicle like a tourer, but a light motorcycle is affected to a large extent.
Damage is Large 。 As long as you are riding a motorcycle, you can't avoid situations that are either large or small, such as minor wounds, collisions, and falls. 。 In that case, you will need to replace the damaged Cowl, and this repair cost quite a bit of money! 。 Repair costs vary depending on the type of Motorcycle, but are estimated to be several tens of thousands of yen.
Poor maintainability. Various parts are hidden in the cowl, so maintenance basically starts by removing the cowl. 。 Even changing the oil has to start with removing the cowl! 。 It is said to be Large sturdy once you get used to it, but it takes a long time to maintain because the Upper Cowl on the front of the Motorcycle needs to be attached and detached, as well as Mirror, Blinker, and other accessory parts.
→GSX-R125 does not require cowl removal for oil replacement.
The exchange can basically be done with Hexagonal Wrench and +Driver. 。 It's in my on-board tools (laughs).
Point:If only a part of the Left Side is to be replaced, all screws on the CowlLeft Side must be removed. 。
Since Cowl is connected One Side by One Side. 。
Be careful not to lose any of the many small parts such as bolts and screws.
good point
◎No more chattering sound in vibration.
◎ Parts cost is relatively low. → I was at a Motorcycle store before I bought this one. If you fall, Cowl is cheap, so you don't have to worry!" I've been told that...yes, that's true (laughs).
◎SEA BASS has a Parts List on its Home page, so you can order at the store if you take down the part numbers.
A bad point
?Cowl removal and attachment is troublesome.
Repair is only a stopgap measure, so I would like to recommend replacement if budget allows! 。
SEA BASS, a manufacturer, has a parts list on their homepage so that you don't have to purchase a separate parts list. I think they are conscientious.
The Image seems to be Hurdle high to take off and put on, but you will get used to it after a few times.
It feels good to replace it.
View detail
Fits: HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CR250R A, HONDA CR250R A, HONDA CR250R A, HONDA CR250R A, HONDA CR250R A
For CB250F
Genuine Rubber, Stomper Cost performance and comparison with other products reasonable price, About shipping and packaging good packaging.Thanks to the webike team.highly recomended. View detail
Fits: HONDA NSR50R, HONDA NSR50R, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR
Good part
Original Honda finishing piece, new. It has a beautiful appearance. Well-crafted, careful with the details. Reliable. It appears to have good durability. I recommend her. View detail
Fits: YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10
Genuine Yamaha Nuts for MT07 2016
After removing the old headlight cover, there were a few of the well nuts that also needed changing. Luckily, it was not the entire set, I just needed 2. They were fairly easy to find the right part number buy checking Yamaha schematics. The price from Webike was very good value. Added with the other parts in my order, the shipping cost was reduced which was good economy. I had the order shipped usiong my chosen courier which is EMS. They just get my orders to me fast and this is why I choose them over others. 5 days and my order arrived. All were very well packaged, these nuts came in the standard Yamaha packets. They are the type of nuts that we call well nuts. They are supposed to grip with the bolt and squash down to make a cushioned nut fastening. These are really well made and did exactly what I expected. Now the headlight cover sits flush and is sturdy. No problems at all. Very happy with these and great job Webike for the fantastic job you guys do. View detail
Fits: SUZUKI DL1000A, SUZUKI DL1000A, SUZUKI DL1000A, SUZUKI DL1000AL8, SUZUKI DL1000AL9, SUZUKI DL1000XAL, SUZUKI DL1000XAL8, SUZUKI DL1000XAL9, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A, SUZUKI DL650A
Parts that don't fit
It looks different from the parts list photo and does not fit.
I ordered three times and this is all I got.
I don't know what the problem is. It's rectangular and a little smaller.
The nut hole should also be smaller, but it looks like a completely different item.
I want to know if the problem is with Suzuki's list or this one.
It's difficult because it's a discontinued model.
-------------------------------------------------- -------- It doesn't fit differently from partslist photos I have three times, but only this comes. I don't know what's going on. Nut holes should be smaller, but it looks like other items I want to know whether Suzuki's list is a problem or this problem It's hard because it's a discontinued model Powered by Google Translator
View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA PS250, HONDA PS250, HONDA ST1100P, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A
Screen Fixation
I am buying more for fixing Screen.
If it is possible to prevent deformation during removal, it would be fine to reuse them, but it is difficult to do so, so I am repurchasing them for replacement with new ones.
View detail
Fits: HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F AC, HONDA CBR1000F AC, HONDA CBR1000F AC, HONDA CBR1000F AC, HONDA CBR1000F AC, HONDA CBR1000F AC
Screen Fixation
When the screen was removed and re-fixed, it was deformed and could not be reused, so a new screen was purchased and replaced. View detail