Reviews
Vibration prevention
It is a re-purchase to attach to the Spring part used for the ChamberFlange part at the time of maintenance.
The product is not bad, but it would be helpful if the price per pc. was a little lower.
View detail
It's not what I originally intended, but...
There are conversion collars that convert M10 to M8 and M8 to M6, but it was difficult to find one that converts M10 to M6, so we used this one for a trial.
Fixing is difficult, but M6 will fit without gaps.
If the original purpose is vibration isolation or cord protection, the M10 hole is perfect.
View detail
Spring resonance subsides.
I was concerned about the sound of the Spring installed at the connection points of each part of the Exhaust System resonating while driving. My car's spring was not equipped with an anti-vibration rubber tube, so I purchased this spring. After checking the length and thickness of your car's Spring, you will be able to choose the one that fits it.
Since the Tube and Spring are Exactly and Fit, it is better to apply a small amount of lubricant when installing the Tube and Spring for better workability.
After installation, I am satisfied with the effect and Large change.
View detail
Parts you can't do without
The RubberWasher at the mounting point of CHIC DESIGN's Road Comet 2 for CB1100RS has broken off due to age-related deterioration.
Repair Parts, but I wouldn't want to be without them! Good to have.
View detail
When you want to Penetrating Cowl such as Power Supply Cable!
I used this product when I wanted to penetrate a cowl such as a power supply cable, etc. Even though it is small, the material protects the cable well.:Plastic and secure. View detail
For anti-vibration measures
I bought it to cover the Silencer spring which I bought at the same time for anti-vibration measure. 1mm thicker than the tube inner diameter size, I use it to cover the spring, but it's tight, so it's easy to cover it with silicon spray inside the tube. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
And the set pipe.
This product can be used not only for Normal muffler but also for some high precision tubes. Especially, it is very effective when it can be used with the collective tube, because it absorbs the vibration, and the load to the exhaust stud bolt is reduced. View detail
It's thicker than I thought
I bought it to prevent the Number from cracking due to vibration on a single cylinder. It is thicker than I thought, so I installed it on the back of the License Plate Bracket, and if there is space, I think it would be the strongest if I put it between the Bracket and the Number. View detail
exchange
Because the Rubber of the ChamberFlange part Spring use had deteriorated, it is purchase here for Replacement.
Installation was fine and the Material seems to be Silicon, so I expect it to be durable.
Quantity:It would be helpful if they were sold at a lower price, such as 1 Set of 2pcs.
View detail
For Exhaust Spring
It is a purchase for the Spring part of the Exhaust System part for vibration prevention.
It's just a Rubber tube, but I couldn't find a better one, so I gave it a try.
Looks normal, price wise I wish it was cheaper.
View detail
It's better to keep it covered.
The CLRExhaust pipe of Mr. KFACTORY is installed, and when the silencer part is fixed with the exclusive aluminum exhaust bracket, it shakes by idling and the exhaust spring is shaken by vibration, so I bought it and covered it. The vibration sound of the exhaust system itself remained a little, but because the vibration sound of the spring almost disappeared, it is good.
I think it is useful because it can prevent the Spring from being broken by the vibration even if it is only put on.
View detail
I think it's a good product
I was looking for a tube so that the spring of the connection part of the Exhaust System would not resonate. There are a lot of similar products, but I decided on this one because of its price. I installed it and have been using it for a while, but it doesn't have any problem with heat. View detail
I think it's a good product
I was looking for a tube so that the spring of the connection part of the Exhaust System would not resonate. There are a lot of similar products, but I decided on this one because of its price. I installed it and have been using it for a while, but it doesn't have any problem with heat. View detail
These are the Parts you should have.
It's a good thing to have, even if you don't have it, but it's a good thing to have, because it reduces the vibration of Spring. You can.
It looks better with it than without it, so it's a Recommendation. Parts.
It's quite close to the exhaust pipe, but so far it has melted or broken, etc. has not occurred.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI KZ., KAWASAKI Ninja H2, KAWASAKI KZ., KAWASAKI Ninja H2
another excellent product, while these rubbers are a simple item, when you need 'em, you need 'em, these items are just the same as the originals, the quality is good, they fit right and they are available, recommended - yes
another excellent product, while these rubbers are a simple item, when you need 'em, you need 'em, these items are just the same as the originals, the quality is good, they fit right and they are available, recommended - yes View detail
For Oil cooler
Oil cooler Purchase for installation.
Because it is currently under Bracket production, it is not actually installed
It seems to be useful for preventing vibration.
Exhaust System Because it is for installation, I think that it is strong against heat.
View detail
A gem where hands reach itching
I had my DAYTONA 's Grab Bar installed at the time of delivery of MT - 09, but the hole opened in Tail cowl became conspicuous because I replaced it with another Grab Bar.
This time I purchased and installed CloseType's Grommet for filling purposes.
【What made you decide the purchase?】
Since the hole was opened in the relatively prominent part of Tail cowl, I thought that this product with colors and shapes that are as inconspicuous as possible is optimal.
Although it floats slightly from the color of the dark Gray Tail cowl, it looks much better than the state where the hole looks like it is full.
【How was it actually used?】
At first glance it looked as though this Grommet was wearing at OEM.
【Mounting was difficult?】
The work of the Motorcycle shop was very moderate, and none of the holes were uniform, because it was not even this, I adjusted the shape while expanding the hole with a Taper reamer and mounted the same all the same Large before mounting.
I did it with my bare hands, so it was Large strange more than I thought. If you have something thin Slotted screwdriver it will be an easy victory. However, it is likely that you will scratch by putting in power, so be careful.
【Please tell me the installation point and hang】
If you do without tools, insert the edge of a hole in a part of the groove of Grommet, and turn it around to Kick Lack, you can go around and wear it. However, since it requires a lot of strength, it would be better to obviously use Slotted screwdriver.
[Is there anything I was disappointed about?]
no problem.
【Hope for Manufacturer - Please let me know if you have any improvement points]
No particular problem. Rather than thank you for submitting such a niche product.
【Have you compared items?】
nothing special
[Others]
The thing purchased this time is CloseType for filling purposes, but when you do Custom with Wiring in future, you can use Open Type.
Also, if you put a break in X in CloseType, I think that it will be possible to pass Wiring while maintaining some waterproof nature.
View detail
It is also such a fine part
When electrical equipment is added, in order to pass Wiring, Material : I drilled a hole in Aluminum's Fender cover.
I thought that there was a better method because the film of Wiring broke and it seemed to short as it passed, but it was solved thanks to this part.
I did not think that even such a fine part was prepared.
View detail
When making a hole in a Cowl and letting wiring pass, it was not a round hole this time [ ] which was purchased for the purpose of protection, but since there is also a Type with which the Size which has responded also to the square hole since it
When making a hole in a Cowl and letting wiring pass, it was not a round hole this time [
] which was purchased for the purpose of protection, but since there is also a Type with which the
Size which has responded also to the square hole since it was soft to some extent is also colorfully prepared, and the hole is not opening it, application is likely to be possible for various uses.
View detail