Reviews
I don't use Size very often.
I rarely have a chance to use a 27mm Combination wrench, but I bought a SIGNET wrench with a good balance of price and quality, thinking it would be used occasionally for suppressing Kashimaru-kun's Holder and for Axle Shaft of Big bike.
It is indeed a powerful Size.
View detail
Size notation is easy to read.
I purchased this for my in-vehicle tools and I really like that Proxxon tools are easy to read with Laser engraved size markings. View detail
Appropriate tools are easy to use
I needed a 15mm Wrench for toe adjustment on my car and always tried my best with a regular length Wrench. I bought a LongWrench because it became sticky and hard to turn if I didn't touch it for a while, and I was able to adjust it easily. I tend to be in an impossible position when adjusting it, so it can be dangerous to turn it with too much effort. I am glad I purchased it. View detail
The details are still this
Recently, Gear wrench has become thinner and can be used for the Large part, but it can not be used for the smallest size. (8,10mm) I bought more of the following.
Plating with a non-slip semi-nashiji surface, thin for easy gripping, and I-section and wide sides for a grip that does not hurt the hand. The bolt nut is firmly gripped with a sense of security. The rigid feel with little rattling makes it easy to feel the turning sensation, and there is no sign of tampering when used in normal operation.
This Wrench is the 21st Century VERSIONTool." The old product, before it was released as the "M" series, was thicker and protruded at the center, but this one is thinner, yet more rigid. This one is thinner but more rigid. Above all, there is no waste part at all, and it looks good.
There may be differences in usability, durability, and reliability from the high-end products, but we feel that this is an area where the average person does not need any more. No worries about breakage if you use it normally. There are no problems with ease of use at all.
I felt 8mm was a little short. (probably due to the Torque used) The length from 10mm to 10mm is long enough for a man with a large hand to turn.
View detail
Standard tools with outstanding reliability
Recently, Gear wrench has become thinner and can accommodate a Large portion, but for places where it still won't fit, the Smallest size is available. (8,10mm) I bought more of the following.
The thin, non-slip, semi-nashi-lined plating is easy to grip, and the I-section grip handles prevent palm pain. The grip is thin and easy to grip with semi-pearskin plating to prevent slipping. The rigidity of the grip is very low, so it is easy to feel how it is turned, and there is no sign of tampering when used normally.
There may be differences in usability, durability, and reliability from the high-end products, but we feel that this is an area where the average person does not need any more.
No worries about breakage as long as you use it normally. No problem at all with ease of use. However, I would feel more comfortable if the 8mm was just a little longer than this.
View detail
Not in Tools Set!
Ducati 900SS needs 11mm for brake fluid replacement with brembo caliper.
When I put Glasses on it to replace it, I found it was too loose with 12mm, and it didn't bite with 10mm... I didn't think it would work with 11mm...?
I didn't have 11mm in my tool box, so I hurriedly snapped up SIGNET's Combination wrench 11mm.
I received the product and immediately replaced the fluid, but it was an exact 11mm. 11mm may not be used very often, but you need a tool.
View detail
Easy-to-use tools
Convenient for tight spaces where a Socket wrench will not fit.
I recommend it because the quality is not bad for the low price.
View detail
for professionals
Although rarely seen in home centers, the Combination wrench is a tool that is highly sought after by tool enthusiasts.
It is often compared to Stahlwille, which is also Made In GERMANY with a pear finish, but the design concept is completely different.
First, HAZET's Combination wrench is roughly made.
The inner surface of the spanner still has some machining marks, and there are also some areas where the BALI and plating are not well done.
Stahlwille showed beauty in the finish in a pear-shaped way, but HAZET (Put it well.) It is dressed in a fashion that is both solid and sturdy.
HAZET's Nashiji is unique in that its unevenness is larger than that of other companies' Nashiji and it is more slippery than other companies' Nashiji.
Also, the difference between the Largeest and the Stahlwille is the rigidity.
Or rather, this point is characteristic of Stahlwille, which has a distinctly squishy feel, even within the prescribed Torque range.
This is where tastes differ, and I gave up Stahlwille because I could not accept the stiffness.
On the other hand, HAZET's design is thin and compact, but it does not have a special firmer feel, and even those who are accustomed to using general tools from KTC and other manufacturers are unlikely to feel any discomfort.
In general, it is a well-made, function-oriented tool.
However, I think you will be betrayed if you expect it to look beautiful, so you will be happier if you ask for an S or N that costs twice as much. or Stahlwille if you are particular about the pear color.
If you are not that particular about combination wrench, TONE or KTC are inexpensive and readily available.
This product is for those who are not satisfied with TONE or KTC, but do not need a beautiful mirror finish and want to choose a product that is functionally oriented.
View detail
Combination without the Zaghari, I'd like to have one!
Many Wrench are zagri
The cut is made at an angle for easy access to the bolt.
This one is easier to work with because it's easier to plug into Bolt.
Ease of use is up!
BUT!!! If it's a low-head Bolt or Nut, the tool is hanging on!
There are so few places!
When I hang the tool and the rattle and uneasiness is Large!
Anyone who works on their own can relate, right?
And since these deen Glasses without the counterbores do not have a counterbore on the front or the back, they are not as large as the deen Glasses without the counterbores.
Did you put it in? Did you put it in? I'm pretty sure it's hung on Bolt and Nut to that point!
I don't feel uneasy when I hang Torque!
I wonder if you understand?
I'm using deen's Combination with the security of not licking and TradeOff, which is a little harder to insert, but I'm still using deen's Combination - I think.
There's a wide variety of Motorcycle Bolts and Screws.
Try to have some tools available ((laughs)).
You will be addicted to the tool swamp!
View detail
Affordable and easy-to-use tool.
I honestly did not expect the quality of the product because of the reasonable price, but it is a Ditona Brand.
This tool is very easy to use. I've used it hard, but the nut doesn't lick and it's easy to use.
The tooling is moderately textured and beautifully finished.RECOMMENDATION!!!
View detail
bulky
No need to prepare Glasses and Spanner for every little maintenance. View detail
Feeling of security
Up workability because of a different sense of security when working View detail
Feeling of security
The grip and the sense of security when working are different. View detail
I feel it's better than KTC.
This is a combination wrench from TONE, the second Japanese standard after KTC.
You can often find them at home centers and other places, so you may have many opportunities to touch the actual products.
There is a tendency in the world to think ” KTC” first of all, but at least in Sun Machine Level, I don't think you can find any part of TONE's tools that is functionally inferior to KTC's.
The only thing I would say is Brand power.
But I think that's simply because ”TONE is a little cheaper, ” and that's because it's an original Image.
In actual use and comparison, I personally did not find anything inferior to KTC.
I don't feel any problems with the sense of precision and rigidity.
Rather, I felt that TONE's surface finish was characteristically high quality and better, somewhere between nashiji and mirror surface, or smooth nashiji.
This is a good product with this quality at a good price and even better availability.
Furthermore, it is better than mindlessly buying KTC, which is more "twu-like".
I would have used KTC's Combination wrench without thinking about it at first, but if I could go back to those days, I would have used TONE.
View detail
Unusual thin Combination wrench
This is a thin Combination wrench from KTC, the Japanese Standard for tools.
As the name suggests, it is MAJORItems for bicyclists, and Amaz*n or something like that, there are a lot of reviews that seem to be cyclist-list.
Basically, it is a Spanner that can access areas that are too thick for normal Spanner to access.
It was 10mm wide on two sides and the thickness of the Spanner section was 3mm.
Generally, this type of thin-walled item is simply lineuped as a Spanner, but this product is a Combination wrench.
Note that the Glasses side is not thin-lipped.
For this reason, I think it is not impossible to use it as an alternative to the normal Combination wrench if you pay attention to the concerns when using it on high Torque areas.
Also, many Thin Open Wrenches have a rough finish due to the base punched out of the plate gold, but this product, as one would expect from KTC, has a normal finish on the spanner section. It is not particularly excellent, but it is not bad at all.
The only thing that I personally think is not good enough, although it is just a preference, is the design of the cherry blossoms.
It doesn't make any functional sense. (It's more likely that dirt will accumulate in the hollows.) I was not attracted to Design.
I want my tools to have functional beauty. It is completely my personal taste.
It is a rare combination wrench as a Thin Open Wrench, so it is the best candidate if you are particular about Glasses.
It is also a product that can be recommended in general because it is definitely a thing.
View detail
Convenient for Oil replacement
It is helpful in tight places such as Oil change.
The feed angle is small, and the machine is well made and highly accurate, so it can be tightened tightly.
Compact and thin, it can be used for the same purposes as ordinary Glasses.
View detail
Tiny and cute.
I bought it thinking I would eventually use it.
Good to use, easy to turn with moderate resistance.
View detail
The protrusion can be used
The protrusion is usable, and the GEAR is just the right lightness. View detail
GEAR is delicate
The GEAR mess has a delicate sound.
They work well in tight spaces.
I use it a lot in tight areas of Stroke.
View detail
Light thin strong!
Good product
It is a light, thin, easy to apply force handle, a tool that is rarely used but is a necessity.
View detail