Reviews
DID chain tool usage review
DID chain tools are small in size and very convenient to use.
The strength of the tool is very strong and reliable.
The method of use is very simple, so anyone can easily operate it.
It seems like one tool can be used for a long time.
This served as an opportunity to further increase trust in DID.
-------------------------------------------------- -------- DID chain tools are small in size and very convenient to use. The strength of the tool is very strong and reliable. The method of use is very simple, so anyone can easily operate it. It seems like one tool can be used for a long time. This served as an opportunity to further increase trust in DID. Powered by Google Translator
View detail
A vital tool for a specific task
Easy to apply the rim stickers with this tool. A couple notes- firstly; absolutely perfect application of the rim stickers was impossible for me. But it's close enough that I'm probably the only one who will ever notice. Secondly: wheel balance weights will obstruct the use of this too & a degree of freehand sticker application will be required, it's not difficult though. View detail
CBR1000RR-R uses this
The Rear Axle Nut of the CBR1000RR-R is 36mm in diameter.
The tightening torque is also high, and a box with many angles was used, but it seemed to come off, so we changed to a 36mm hexagonal box.
At the same time, I also purchased a pure STD Nut with it. I think I was able to buy peace of mind at a reasonable price with FirmlyFit. I think I was able to take countermeasures before I got injured, although I am satisfied with myself.
View detail
It's great that it's not difficult.
I thought Chain exchange could only be done at the Shop.
I nervously worked through the Instruction Manual and YouTube, and it was surprisingly easy.
Next, I have prepared a Chain replacement for GSX1300R HAYABUSA and will lend it to my friend.
If you use it for a few cars, it will be enough to pay for itself.
I'm glad I bought it... ♪
View detail
BIGSize！！
I use it to fix sub-computers, voltmeters, oil temperature meters, thermometers… and other electronic devices that I have installed in my car. It is easy to attach and detach, yet it is very strong! View detail
Even an amateur can replace the chain. (However, 27mm Glasses are required.)
Recommended Chain Replacement Tool for DIY.
Chain replacement tools range from those that cost 40,000-50,000 yen to those that cost less than 5,000 yen. To be honest, I was hesitant about the price because I use them very infrequently (maybe not even twice), but I was sure of their quality and the official videos on how to use them. I'd rather buy something for $4,000 and have it fail." I bought it with the feeling of
You can replace it without mistake by following the instructions as shown in the official video.
The point that I had a hard time was that there were no 27mm Glasses, so I used MONKEY as a substitute, which made it difficult to fix the body, which is important, and I could not use force, etc. 27mm Glasses are essential to fix the body securely. I will definitely prepare 27mm glasses next time I use it.
The 19mm turning side can be adequately handled by the Box and Ratchet Handlebar.
It is also good that the OtherParts are sold in bulk. I experienced the pin removal process for the first time, but I feel it is inevitable that I will make a mistake and bend it someday.
If you are going to replace the Chain yourself, I don't think there is an option below this (price), so I think the Cost performance is sufficient.
View detail
Fits: KAWASAKI GPz1100, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, その他 , KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z1100 R (US), KAWASAKI Z1000 MkII, KAWASAKI Z1000 A1-A2(US), KAWASAKI Z1-R
Constructed on Z1
I was using another company's BOOSTER for light intensity measures for car inspections, but it had a large relay near the battery and I had a hard time finding space to install it, The Pams BOOSTER cost less than other companies, but it fits in the headlight case, so I am satisfied with it.
I don't know about durability yet, as I just installed it.
View detail
The uses are unlimitedLarge!
I used it to secure the sub-computer on my Ninja 250SL, but I had some left over so I used it on the screen door of my front door! The adhesive is strong and does not come off, yet it is easy to put on and take off! This is really convenient! I think it can be used anywhere as long as it does not get wet! It is easy to install because you just need to remove the grease and stick it on! It is the most convenient product! View detail
Easy to use
I'm going to use the gloves and I don't have to worry about changing the Oil. View detail
Yamaha tappet adjuster 3mm
Original YGP. Fast shipping 3 days from mailed date to Singapore . Package bubble wrapped to ensure no priduct damage during shipping. View detail
It worked for the 3rd generation GSX1300R HAYABUSA.
I'm not sure if it's necessary to use a 14mm socket wrench or not, but I'm sure it's a good idea to use a small tool for the GSX1300R HAYABUSA in order to keep it in good condition. View detail
Just right for Large Motorcycle
I think this size is necessary for Large Motorcycle riders. View detail
It is considerably less expensive than OEM but functions well.
O-ring for Generator of CUB series.
It is cheaper for Large than buying OEM. At least as of this writing in May 2024, OEM costs about $340. OEM is getting expensive….
It is just an oil-resistant O-ring, but surprisingly, there is no general standard product, so we have to rely on OEM or compatible products.
I'm basically a reuser of O-rings here. Bought just in case at OH." But after a while after OH, it started leaking and I had to use it. This kind of leakage is scary because it comes out of nowhere even though it looks fine.
After replacing it with this product, it is functioning without any leakage at all.
It is just an O-ring, so there is nothing special to say, but be careful not to twist it when installing it. If it twists, it will break and leak.
An old ring is hardened and oil is absorbed, so it is difficult to twist even if it is attached properly, but a new ring will twist.
Once oiled and installed, the twisting can be fixed by inserting a thin, non-sharp stick such as GlassesDriver between the groove and the Ring and turning it around.
Anyway, it is better available and less expensive than OEM, so if you have an old CUB-type Engine, I recommend you to buy it while shopping on webike.
View detail
Good!
As expected of KOKEN.
I am satisfied with the texture of the Anodized that I requested . (^o^) /
Since it is anodized, we can only request aluminum products, but we asked Pinpoint to anodize the parts and bolts that we wanted to add color to.
The color I requested is Pink.
There are many Anodized products in the world, such as Blue, Red, Gold, etc., but there are almost no products in Pink color. (Polish)
But thanks to this, we were able to create a nice dress-up look that was not similar to other people's.♪
View detail
![[MOLYGREEN] Oil Change Poi Box](https://img.webike-cdn.net/catalogue/images/118721/01_TS.jpg)
This is my first purchase.
I purchased it for the first time.
The Large size and the height of the box were just right for 50cc and Smooth Oil change.
The only drawback is that it does not come with thin gloves for replacement, which must be prepared separately.
View detail
Good and inexpensive.
All waste oil treatment Boxes are the same.
That being said, it is the same, but this box even comes with Vinyl gloves + Tie Wrap for oil changes, so it is better than the others.
Other basic functions remain unchanged.
View detail
I was able to replace it properly.
I had a DRC Chain tool in the past, and when cutting a 428 chain, the tip of the tool broke off and I had trouble replacing it, so I was distrustful of this manufacturer's products.
This time, I decided to buy it after seeing other people's impressions and videos that seemed to work, and after considering the labor cost to ask the shop to do it.
I started with Chain cut to replace the 520 Chain and was able to cut it with no problem at all.
The work proceeds according to the instruction manual and is completed relatively smoothly until the Plate is press-fitted.
The last Crimp work, the Body is a little smaller than the Material.:Although it was light for aluminum and required considerable force, we managed to install Crimp.
I think it is a great product that can do everything from cut to crimp with just one tool. The size is larger than the previous version and I think it is stronger.
If you want to replace the Chain and Sprocket by yourself, we recommend this product because it is reasonably priced and works well!
View detail
On the MVX250F.
I used it to fill the front fork with air. It's good because I can fill low pressure like 0.4 properly. View detail
Shape differs from the photo shown!
The photo shown here differs from the photo of the item sent to us.
The photo shows a slightly angled one with a split center, one side was Straight, so I bought it, but the one I sent is 90° right-angled, and the other side is a slightly slanted shape, which is totally different.
Only the color is the same in purple, Material seems to be resin and scratch resistant and looks good, but the shape is different from what I wanted. The price is not good.
View detail
substitute for an another
I bought this for a replacement for a plastic hammer that had a scratch or dent on the head. View detail