Reviews
It is a good item
Used for SUPER CUB 90 which was converted to Battery reply.
When waiting at a traffic light at an intersection, the blinker stops blinking when the headlight is turned on and the brake is applied,
Switching to this product helps because the Blinker blinks properly.
Simply remove the Tail lens and replace the Valve.
It is brighter than the Normal valve and eliminates Valve breakage, so there is one less cause for concern.
View detail
failed to pass inspection
Less than one year after replacement, some of the bulbs went out and the Stop became non-lighting.
Although I thought it was faintly on the day before the inspection, it was not lit on the inspection line.
Even if we can discount it to individual differences, the quality control is so poor that we will refrain from using the same Manufacture's products in the future.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
KSR2 is mounted and brightness is OK.
I installed it on my KSR2 and the brightness Level is OK both in Position and in Brake. Other users' impressions were that the brightness became dark, but with the KSR2, I was able to check the brightness even during the daytime and the Level is Large and sturdy.
The LED headlight is more expensive than the Pine Stripe LED headlight, so I can't say that it has superior cost performance, but the product itself is solid and a good product.
KSR is a small battery vehicle, so if you use a lot of electricity such as for an electric tachometer, water temperature gauge, smartphone charging, etc., it is recommended to use LED headlight and tail lamps to secure electricity quickly.
Finally, the packaging has been changed from a box to a thick vinyl package. I am concerned about the packaging of this delicate product if it is not packaged properly for mail order.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Brightness can be secured by attaching to KSR2
I installed it on my KSR2, and the brightness was maintained in both Position and Brake. I have seen some other people's impressions that the brightness became darker, but with the KSR2, the brightness is at a level that can be confirmed even during the daytime.
The price was higher than Matsu Stripe's LED headlight, so I can't say that the cost performance is excellent, but I think the product itself is a good product.
If the vehicle is powered by electric power (e.g., electric tachometer, water temperature gauge, smartphone charging, etc.), we recommend using LED headlight and tail lamps to secure the power.
Finally, the packaging of the product has been changed from boxed to thick vinyl, which is a bit worrisome since it is a Delicate product and if it is not packaged well, I would be concerned.
View detail
Can be used for socializing.
I don't know if I will use it, but I have been wanting a "Round and round Tail" for a long time, so I bought it. I bought this one because the price is not so different from the one that is priced at about 2,000 yen from Yahoo! View detail
For NSR250R MC18
I used this product for a tail lamp to save power consumption for my old 2nd motorcycle. I purchased this and L8186 at the same time and installed them because the direction of the pin is opposite to the direction of the light as shown in the description of the product. View detail
Fits: Others
Bright! Expect durability
Used for SUPER CUB110JA59.
The previous SUPER CUB110JA44First Model Type had a Wedge type Tail Bulb, so I chose the same Manufacturer's LED Bulb again because I had been using LEDs for 6 years without any complaints.
As shown in the Manufacturer's compatibility information, I bought Type L8184 because License Plate Light is the lower type.
It was easy to install with no problems.
Since the replacement only requires the removal of the tail lens, the work can be completed in 5 minutes.
When installed, the Tail, Stop, and License Plate Light each emit a separate light, and this should be acceptable in terms of traffic laws.
The brightness and sharpness of the lighting is also that of the LED Merit, and I am sure that this will be well recognized by following cars.
I expect it to be durable enough to be used for more than 6 years without bulb breakage like the last time.
The price is many times that of a regular light bulb, but the peace of mind you get is more than worth it when you consider that you ride to work every day.
View detail
Fits: Others
Visibility Up
Since it is a scooter, the flickering during idling, which is not stable, is unavoidable, but it is brighter and more visible than the OEM. View detail
SUPER CUB110 JA59 and SR400 FE Tail lamp LED
[How is it used?
Tail lamp LED for SUPER CUB110 JA59 and SR400 FE to reduce battery load.
Was the one you received as per Image?
No problem
Was the installation difficult?
Both JA59 and SR have BoltQuantity for Tail lamp Cover.:Easy to use, just remove it with 2pcs and change to LED light.
How was your experience with it?
No problem.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Used for CUB90
CUB90 is equipped with external Tachometer, various sensors, USB power supplyCoupler, and LED on the Tail to reduce battery load.
The bulb power consumption of the NORMAL is 15W/8 and the LED is 21W/5. The LED is not labeled in Lumen so I did not know how bright it was but I trusted Brand.
The large size is a little smaller than a light bulb, the bracket is in good condition and the tail lens has not been hit.
I read that it was a little dark in the impressions, so I cleaned the tail lens and put aluminum tape on the tail case, which is an old-fashioned way of doing things.
The Tail Chica-Chica is a little bit when the Idling is on. Stop-lamp is powered by battery, so it does not ChicaChica. The light is bright enough to pierce your eyes at some angles.
When the Lens is turned on, the ChicaChica of the Tail is not felt. The brightness of the Tail is about two-thirds that of the bulb, and the Brake is about the same or slightly stronger than the bulb, which is fine.
Tail is AC so ChicaChica is not an option but I don't know how it is for the life of the LEDs. I have been using it for about 6 months and so far no problems. I remove the Lens every once in a while, but it is not burnt or deformed.
After installation, the charging voltage did not change during idling. Battery load seems to be decreasing. I think it can go as it is.
View detail
LED Bulb for improved visibility!
Replaced with StanleyLEDStandard valve to improve visibility of Stop/Tail.
The deciding factors were that it is made by Stanley Electric, which is also used as an OEM for domestic motorcycles and automobiles, and that it has the Japanese Vehicle Inspection Correspondence and luminous color. (Color) was the light bulb color.
Lumen value when luminous (lm) 370/45lm, Kelvin value (K) The light:2700K, a natural coloring without becoming BlueWhite with the explosive light of so-called LEDs, so it can be casually installed even on older motorcycles.
We also expect that the load on the Battery will be reduced since the power consumption will be lower with a rating of:12/24V 2.8/0.4W.
Compatible Light Bulb Type is S25 BAY15d, so it can be used for most car models.
In my case, I installed it on a TRX850, so I had to remove the Seat Cowl and Tail lens during the installation process, which was a bit time-consuming, but I think the Kill is Large sturdy without any particular need for more work than necessary.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
I thought it would be very bright.
Small is dark.
Stop-lamp is bright, though.
I think it saves power, so I hope it will last for a long time.
View detail
SR400 Tail with a modern look
The LED's characteristic sparkling light will also increase visibility. View detail
Great!
I have a SEROW250 with a Grip heater, but when I turn on the Blinker and Stop-lamp with Idling, the voltage sometimes drops below 12v, so I bought it to save power.
Even if Stop-lamp is turned on, the voltage hardly drops and Large succeeds!
This is only for SEROW250, but the Tail lens is really hard to remove, so it is better to remove the Tail Lamp Lamp ASSY and work on it, even if it is troublesome.
Remove the Seat, Number, Rear Fender, and Tail lamp in this order, and you will find a hole through which the Hexagonal Wrench that removes the Tail lens passes.
Working without removing the Tail Lamp Lamp ASSY is impossible to attach the Lens, even if you can manage to remove it!
View detail
It's good.
It's hard to tell from the picture, but it's a power-saving, sharp, and reliable License Plate Light made by a famous Japanese manufacturer, so you can use it with confidence.
This product. Expensive!" If you are saying, "I am not sure. I think it is better to buy a high quality Valve from Japan, even if it is expensive, than to buy a cheap, low quality Valve from a certain country and replace it many times, which is definitely better in the total.
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA APE 100, HONDA APE 50, HONDA GORILLA, HONDA GORILLA, HONDA JOKER90, HONDA JOKER Helmet, HONDA ZOOK, HONDA solo, HONDA DREAM50, HONDA Byte, HONDA MONKEY BAJA, HONDA MONKEY, SUZUKI ADDRESS V100, YAMAHA BWS100(BWS), YAMAHA AXIS 90, YAMAHA APRIO, YAMAHA APRIO, YAMAHA GRAND AXIS, YAMAHA JOG (2Cycle)
ไฟท้ายสีแดงสวยงามใช้งานได้ดี View detail
Fits: KAWASAKI ELIMINATOR 125 , KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, HONDA FTR223 Tricolor, HONDA FTR223 DELUXE, HONDA FTR223 Standard, KAWASAKI ESTRELLA, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI W650 (Handlebar Up TypeSpec.), KAWASAKI W400, KAWASAKI KSR110, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 Custom
1 pc. as spare
I haven't had to replace it in a long time.
Replace with a new one just in case
Well, it's just an ordinary light bulb.
Quantity:1 Set of 2pcs. so the other one is a spare.
View detail
just in case
For use in the car with Phillips Screwdriver for preventing ball breakage while on the road. View detail
CRF250 to full LED
CRF250RALLY50 was not LED only Tail bulb, so I bought it to change to full LED.
There are similar valves available from various manufacturers, but we decided to go with Stanley, a long-established manufacturer of light bulbs, because we wanted to get a good one.
Valve itself is very carefully made and very different from the inexpensive Valve.
The replacement itself can only be done by removing the Seat and then the Tail cowl, but it is not that difficult.
The light intensity after the replacement is also brighter, making it a very satisfactory product.
View detail
For automotive use
It is mounted on board with Phillips Screwdriver as a countermeasure against running out of Valve on the road. View detail