Reviews
The color...
I had to buy a new brake lever because when I tipped it to the Right Side, the end of the lever was bent and when I bent it again, it broke as expected.
Unfortunately, the color of this Lever is so different between Clutch and Brake that I wondered if it was another company's product. The colors are so different that I'm not sure if it's another company's product or not.
I am satisfied with the feeling of using it. I bought the short lever at the same time and tried to use it, but since I hold the Axel with my thumb and index finger and the Brake with three fingers from my middle finger, if I hold it a little outside of the Handlebar, my Small finger will hit the ball. The long one was right for me.
If you have two fingers, index and middle, I think Short lever is no problem at all.
When I knocked it over, the Foldable didn't work very well and the tip of the Lever bent. I think this is due to the angle at which the tip hit the ground and other factors.
View detail
Good function and texture, but operability is below OEM
I bought it because I can use the parking brake and it has a good texture, but the distance from the lever mounting screw to the pivot is too long, and when I mount it at the OEM lever position, the lever position is too far out and I can't hang my index finger on the lever. As a result, the lever holder is moved to the inside of Handlebar as much as possible, and the index finger can be hung on the lever somehow. However, because Lever holder itself goes inward, Mirror is also driven inward, and one device is necessary for the adjustment of Mirror. If you don't have your index finger on the brake lever, you may not have any problem. "Is this going to be a failure? OEMLever seems to be a better product, is it an example of why you shouldn't buy from BrandImage? View detail
Fits: YAMAHA XT600E, YAMAHA XT400, YAMAHA XS400, YAMAHA XS250, YAMAHA XS250, YAMAHA XS250, YAMAHA XS250, YAMAHA SR250, YAMAHA FZR750R(OW-01), YAMAHA YZ80, YAMAHA YZ80, YAMAHA YZ125, YAMAHA XJ650, YAMAHA XJ650, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ400
It is different from the old type
I purchased it for spare use
If it was an old type, Kijima
Have you hit Lever Body?
The Type now is like a bling
I thought that was the thing at that time and I'm disappointed when I make a purchase
Product name is Power lever Anything but
It is actually subtle
To the last not to be concerned with Lever of NORMAL
It may be recommended
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
operation
I exchanged because Clutch was hard. As a result, it is somewhat lighter, but Handlebar and Lever are just good. A little Custom feeling came out. It is a pity that the tip is round, but looking will change if you cut it flat. View detail
I've been having an antlion part for my ZRX400 which I used to drive, but the DAEG one was completely different and it even needed special tools for installation. After all, I had to take it to a motorcycle shop to borrow tools for the installation. This
I've been having an antlion part for my ZRX400 which I used to drive, but the DAEG one was completely different and it even needed special tools for installation. After all, I had to take it to a motorcycle shop to borrow tools for the installation. This part is well made. But the attached pins were so small, I had trouble picking it up when I dropped one on the floor.
I think it would be better if it had uniform standards rather than separate ones for mid-size bikes and large-size bikes.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
It attached to VT750S. Since the clutch lever was far, it exchanged. Although it was good to have become easy to put power into a lever, probably because the path of an axis does not suit, it somewhat carries out that it is shaky. Since it use
It attached to VT750S.
Since the clutch lever was far, it exchanged.
Although it was good to have become easy to put power into a lever, probably because the path of an axis does not suit, it somewhat carries out that it is shaky.
Since it uses, and was not troubled so much and there was no VT750S in a conformity table, a cramp also complains.
It was slightly regrettable.
View detail
It is the piece only for a brake lever of the product number 08811. Although it is satisfied with the highest about the lever main part, it is a question a little about whether there is any meaning which carries out the option of these parts. It i
It is the piece only for a brake lever of the product number 08811.
Although it is satisfied with the highest about the lever main part, it is a question a little about whether there is any meaning which carries out the option of these parts.
It is because it thinks that what is necessary is to set to a main part and just to sell from the start.
Although color coordinates are made or merit comes to mind in case of an option only as for a grade ...
The meaning made into the option since it is parts in which trade becomes invisible from time to time somehow is whether to be around there.
I think that the direction in which is whose merit of this product a solution and present is purchased since it is a thing in which it may be made a set and the price of a body price may rise about 1000 yen.
An answer will be NO if it is called [ Doesn't it function, unless it incidentally attaches piece? ] ?.
Only by adjustment becoming troublesome, it turns with KURIKURI by a smaller slotted screwdriver, and sets to a favorite location.
The rest will be OK if a vinyl cap (a thing like the antenna cap of RC) is put there.
View detail
It is an adjuster piece which becomes indispensable at the time of use of a billet lever. Although texture is also high and good, the same color setting may also differ between a lever and a color. Moreover, although it may be called exclusive ele
It is an adjuster piece which becomes indispensable at the time of use of a billet lever.
Although texture is also high and good, the same color setting may also differ between a lever and a color.
Moreover, although it may be called exclusive elegance, for a certain reason, that the price as parts is also high makes evaluation a two stars.
View detail